Konica Minolta magicolor 1690MF d User Manual

							Printable Area 3-10
Envelopes
Envelopes can only be printed on their front sides (side where the recipient’s 
address is written). In addition, printing on the front side in the area overlap-
ping the back flap cannot be guaranteed. The location of this area differs 
depending on the envelope type.
The envelope print orientation is determined by your application.
With the Envelope DL size (long edge feeding), the nonprintable areas 
on the left and right sides are 6 mm.
Page Margins
Margins are set through your application. Some applications allow you to set 
custom page sizes and margins while others have only standard page sizes 
and margins from which to choose. If you choose a standard format, you may 
lose part of your image (due to printable area constraints). If you can cus-
tom-size your page in your application, use those sizes given for the printable 
area for optimum results.
a=4.0 mm (0.157)
Non-printable area
Non-guaranteed printable area
Guaranteed printable area
Front side
(can be printed)Back side
(cannot be printed) aa
a
a
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media3-11
Loading Media 
How do I load media?
Take off the top and bottom sheets of a 
ream of paper. Holding a stack of approx-
imately 200 sheets at a time, fan the 
stack to prevent static buildup before 
inserting it in a tray.
Note
Although this machine was designed for printing on a wide range of 
media types, it is not intended to print exclusively on a single media 
type except plain paper. Continuous printing on media other than plain 
paper (such as envelopes, labels, or thick stock) may adversely affect 
print quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it 
with the new media, even the edges, then reload it. 
Do not mix media of different types and sizes, as this will cause media mis-
feeds.
Tray 1 (Multipurpose Tray)
For details on the types and sizes of media that can be printed from Tray 1, 
refer to “Print Media” on page 3-2.
Loading Plain Paper
1Remove the dust cover.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 3-12
2Slide the media guides to pro-
vide more space between them.
3Load the paper face up in the 
tray.
Do not load paper above 
the 
 mark. Up to 200 
sheets (80 g/m2 [21 lb]) of 
plain paper can be 
loaded into the tray at 
one time.
M
M
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media3-13
4Slide the media guides against 
the edges of the paper.
5Install the dust cover.
6Select TRAY1 PAPER SETUP in the UTILITY menu, and then select 
the settings for the size and type of paper that is loaded. See also “Print 
Media” on page 3-2.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 3-14
Other Media
When loading media other than plain paper, set the media mode (Envelope, 
Label, Letterhead, Postcard, Thick Stock 1, or Thick Stock 2) in the driver for 
optimum print quality.
Loading Envelopes
1Remove the dust cover.
2Remove any media in the tray.
3Slide the media guides to pro-
vide more space between them.
M
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media3-15
4Load the envelopes flap side 
down in the tray. 
Before loading enve-
lopes, press them down 
to make sure that all air is 
removed, and make sure 
that the folds of the flaps 
are firmly pressed, other-
wise the envelopes may 
become wrinkled or a 
media misfeed may 
occur.
Up to 10 envelopes can 
be loaded into the tray at 
one time.
For envelopes with the flap (Envelope C6 and Envelope DL), load 
the envelopes with the flap side inserted first.
5Slide the media guides against 
the edges of the envelopes.
M
M
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 3-16
6Install the dust cover.
7Select TRAY1 PAPER SETUP in the UTILITY menu, and then select 
the settings for the size and type of media that is loaded. See also “Print 
Media” on page 3-2.
Loading Label Sheets/Letterheads/Postcards and Thick 
Stock
1Remove the dust cover.
2Remove any media in the tray.
M
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media3-17
3Slide the media guides to pro-
vide more space between them.
4Load the media face up in the 
tray.
Up to 50 sheets can be 
loaded into the tray at 
one time.
5Slide the media guides against 
the edges of the media.
M
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 3-18
6Install the dust cover.
7Select TRAY1 PAPER SETUP in the UTILITY menu, and then select 
the settings for the size and type of media that is loaded. See also “Print 
Media” on page 3-2.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media3-19 Tray 2
Only Letter/A4 plain paper can be loaded in Tray 2.
Loading Plain Paper
1Pull out Tray 2 as far as possi-
ble.
2Lift up Tray 2 to remove it.
Downloaded From ManualsPrinter.com Manuals