Konica Minolta magicolor 1690MF d User Manual

							Making Advanced Copies 5-12
Duplex (Double-Sided) Copying From the Original Glass
Duplex (double-sided) copying can also be performed by placing the docu-
ment on the original glass.
1Position the document on the 
original glass.
For details on positioning 
the document on the orig-
inal glass, refer to “Plac-
ing a document on the 
original glass” on 
page 3-28.
2In the main screen (Copy mode), press the + or , key to select the cur-
rent duplex setting, and then press the Select key.
3Press the + or , key to select LONG EDGE or SHORT EDGE, and then 
press the Select key.
For details on LONG EDGE and SHORT EDGE, refer to “Duplex 
(Double-Sided) Copying From the ADF” on page 5-11.
4To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
Scanning of the document begins.
5When NEXT PAGE? appears in the message window, place the second 
document page on the original glass, and then press the Select key.
After the second page (back side) is scanned, printing begins automati-
cally.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies5-13 Setting Collated (Sort) Copying
With collated (Sort) copying, multiple copies of multi-page documents can be 
printed in order and sorted by copy set.
Collated (Sort) Copying From the ADF
1In the main screen (Copy mode), press the + or , key to select the cur-
rent Sort setting, and then press the Select key.
2Press the + or , key to select SORT, and then press the Select key.
The main screen (Copy mode) appears again.
Collated (Sort) Copying From the Original Glass
1Position the document on the original glass.
For details on positioning the document on the original glass, refer 
to “Placing a document on the original glass” on page 3-28.
2In the main screen (Copy mode), press the + or , key to select the cur-
rent Sort setting, and then press the Select key.
3Press the + or , key to select SORT, and then press the Select key.
4To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
5When NEXT PAGE? appears in the message window, place the second 
document page on the original glass, and then press the Select key.
6Repeat step 5 until all document pages have been scanned.
7After all document pages have been scanned, specify the desired number 
of copies using the keypad, and then press the Start-Color key or the 
Start-B&W key to begin printing.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Advanced Copies 5-14
Downloaded From ManualsPrinter.com Manuals 
						

							6Using the Scanner
Downloaded From ManualsPrinter.com Manuals 
						

							Scanning From a Computer Application 6-2
Scanning From a Computer Application
Documents can be scanned from a computer connected to this machine with 
a USB cable or via a network. Scanning settings can be specified and the 
scanning operation can be performed from TWAIN- or WIA-compatible appli-
cations. From the scanner driver, a preview can be displayed and various 
adjustments, such as the size of the scan area, can be specified.
For details on the installation of the scanner driver or network TWAIN 
settings, refer to the Installation Guide.
Basic Scanning Operation
1Position the document to be 
scanned.
For details on positioning 
the document, refer to 
“Placing a document on 
the original glass” on 
page 3-28 and “Loading 
a document into the ADF” 
on page 3-29.
2Start the application to be used for scanning.
3Start the scanner driver according to the application settings.
4Specify the necessary scanner driver settings.
5Click the Scan button in the scanner driver.
Downloaded From ManualsPrinter.com Manuals 
						

							Scanning From a Computer Application6-3 Windows TWAIN Driver Settings
„Load
Load a saved settings file (dat file) for scanning.
„Save
Save the current settings as a settings file (dat file).
„Default
Return all settings to their defaults.
„Help icon
Click to display the Help.
„About icon
Click to display the software version information.
„Paper source
Select whether documents are placed on the original glass or loaded into the 
ADF.
„Original Size
Specify the original size.
„Scan Type
Specify the scan type.
„Resolution
Specify the resolution.
„Scale
Specify the enlargement or reduction ratio for the selected area.
If the resolution is set at 1200 × 1200dpi or higher, a setting larger 
than 100% cannot be specified.
„Scanning mode
Select Auto or Manual. When Manual is selected, a tab appears so that 
detailed settings can be specified, for example, for Brightness/Contrast and 
Filter.
The parameters that can be set differ depending on the scanning 
mode that is selected.
If Auto is selected as the scanning mode, scanning from the original 
glass is performed after a prescan is performed so that a preview 
image can be checked.
Downloaded From ManualsPrinter.com Manuals 
						

							Scanning From a Computer Application 6-4
„Image size
Shows the data size of the scan image.
„Rotation
Select the orientation of the image to be scanned.
„Close
Click to close the TWAIN driver window.
„Prescan
Click to begin scanning a preview image.
„Scan
Click to begin scanning.
„AutoCrop icon
Click to automatically detect the scanning position based on the preview 
image.
„Zoom icon
Click to rescan the area selected in the preview window and enlarge it to fit 
the window.
„Mirror icon
Click to display a mirror image of the preview image.
„Tone Reversal icon
Click to reverse the colors of the preview image.
„Clear icon
Click to erase the preview image.
„Preview window
Displays a preview image. Drag the rectangle over the image to select an 
area.
„Before/After (RGB)
Move the pointer in the preview window to display the color tones at the 
pointer’s position before and after adjustments.
„Width/Height
Displays the width and height for the selected area in the selected measure-
ment units.
Downloaded From ManualsPrinter.com Manuals 
						

							Scanning From a Computer Application6-5 Windows WIA Driver Settings
„Paper source
Select whether documents are placed on the original glass or loaded into the 
ADF.
„Color picture
Select this setting when scanning in color.
„Grayscale picture
Select this setting when scanning in grayscale.
„Black and white picture or text
Select this setting when scanning in black and white.
„Custom Settings
Select this setting when scanning with Adjust the quality of the scanned 
picture settings applied.
If settings have been specified with Adjust the quality of the 
scanned picture, Custom Settings is automatically selected.
„Adjust the quality of the scanned picture
Click this message to display the Advanced Properties dialog box. In the 
Advanced Properties dialog box, settings can be specified for Brightness, 
Contrast, Resolution, and Picture type (select from color, grayscale, or 
black and white).
These settings are applied when Custom Settings is selected.
„Page size
Specify the paper size when Page source is set to Document Feeder.
„Preview window
Displays a preview image. Drag the rectangle over the image to select an 
area.
„Preview
Click to begin scanning a preview image.
„Scan
Click to begin scanning.
„Cancel
Click to close the WIA driver window.
Downloaded From ManualsPrinter.com Manuals 
						

							Scanning From a Computer Application 6-6
Macintosh TWAIN Driver Settings
„Load
Load a saved settings file (dat file) for scanning.
„Save
Save the current settings as a settings file (dat file).
„Default
Return all settings to their defaults.
„Help icon
Click to display the Help.
„About icon
Click to display the software version information.
„Paper source
Select whether documents are placed on the original glass or loaded into the 
ADF.
„Original Size
Specify the original size.
„Scan Type
Specify the scan type.
„Resolution
Specify the resolution.
„Scale
Specify the enlargement or reduction ratio for the selected area.
If the resolution is set at 1200 × 1200dpi or higher, a setting larger 
than 100% cannot be specified.
„Scanning mode
Select Auto or Manual. When Manual is selected, a tab appears so that 
detailed settings can be specified, for example, for Brightness/Contrast and 
Filter.
The parameters that can be set differ depending on the scanning 
mode that is selected.
If Auto is selected as the scanning mode, scanning from the original 
glass is performed after a prescan is performed so that a preview 
image can be checked.
Downloaded From ManualsPrinter.com Manuals 
						

							Scanning From a Computer Application6-7
„Image size
Shows the data size of the scan image.
„Rotation
Select the orientation of the image to be scanned.
„Close
Click to close the TWAIN driver window.
„Prescan
Click to begin scanning a preview image.
„Scan
Click to begin scanning.
„AutoCrop icon
Click to automatically detect the scanning position based on the preview 
image.
„Zoom icon
Click to rescan the area selected in the preview window and enlarge it to fit 
the window.
„Mirror icon
Click to display a mirror image of the preview image.
„Tone Reversal icon
Click to reverse the colors of the preview image.
„Clear icon
Click to erase the preview image.
„Preview window
Displays a preview image. Drag the rectangle over the image to select an 
area.
„Before/After (RGB)
Move the pointer in the preview window to display the color tones at the 
pointer’s position before and after adjustments.
„Width/Height
Displays the width and height for the selected area in the selected measure-
ment units.
Downloaded From ManualsPrinter.com Manuals