Konica Minolta bizhub 500 User Manual
Here you can view all the pages of manual Konica Minolta bizhub 500 User Manual. The Konica manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
2Scanning Documents
2-56 bizhub 500/420
Scanning Documents
Chapter 2
5Select the desired zoom ratio type, and then use the keypad to specify
the zoom ratio.
– To enlarge or reduce the scan at a zoom ratio that is the same hor-
izontally and vertically, select a zoom ratio for “Zoom with Constant
X and Y Ratio”.
– To enlarge or reduce the X and Y directions at different ratios, touch
[X] or [Y] below “Individual Zoom”, and then specify the corre-
sponding zoom ratios.
– To change the zoom ratio for one...](http://img.usermanuals.tech/thumb/2790/37212/w300_Konica_Minolta_bizhub_500-90.png "Page 91
2Scanning Documents
2-56 bizhub 500/420
Scanning Documents
Chapter 2
5Select the desired zoom ratio type, and then use the keypad to specify
the zoom ratio.
– To enlarge or reduce the scan at a zoom ratio that is the same hor-
izontally and vertically, select a zoom ratio for “Zoom with Constant
X and Y Ratio”.
– To enlarge or reduce the X and Y directions at different ratios, touch
[X] or [Y] below “Individual Zoom”, and then specify the corre-
sponding zoom ratios.
– To change the zoom ratio for one...")
2Scanning Documents 2-56 bizhub 500/420 Scanning Documents Chapter 2 5Select the desired zoom ratio type, and then use the keypad to specify the zoom ratio. – To enlarge or reduce the scan at a zoom ratio that is the same hor- izontally and vertically, select a zoom ratio for “Zoom with Constant X and Y Ratio”. – To enlarge or reduce the X and Y directions at different ratios, touch [X] or [Y] below “Individual Zoom”, and then specify the corre- sponding zoom ratios. – To change the zoom ratio for one...
Page 92
![Page 92
Scanning Documents2
bizhub 500/420 2-57
Scanning Documents
Chapter 2
Density
Specify the density for scanning.
1Touch [Scan Setting] in the Scan mode screen.
2Touch [Density].
– To select a specific density, touch [Light] or [Dark].
– Touch [Std.] to select the default setting.
– To scan with the density most appropriate for the detected density
of the document, touch [Auto].
3Touch [OK], and then touch [OK] in the next screen that appears.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37212/w300_Konica_Minolta_bizhub_500-91.png "Page 92
Scanning Documents2
bizhub 500/420 2-57
Scanning Documents
Chapter 2
Density
Specify the density for scanning.
1Touch [Scan Setting] in the Scan mode screen.
2Touch [Density].
– To select a specific density, touch [Light] or [Dark].
– Touch [Std.] to select the default setting.
– To scan with the density most appropriate for the detected density
of the document, touch [Auto].
3Touch [OK], and then touch [OK] in the next screen that appears.
Downloaded From ManualsPrinter.com Manuals")
Scanning Documents2 bizhub 500/420 2-57 Scanning Documents Chapter 2 Density Specify the density for scanning. 1Touch [Scan Setting] in the Scan mode screen. 2Touch [Density]. – To select a specific density, touch [Light] or [Dark]. – Touch [Std.] to select the default setting. – To scan with the density most appropriate for the detected density of the document, touch [Auto]. 3Touch [OK], and then touch [OK] in the next screen that appears. Downloaded From ManualsPrinter.com Manuals
Page 93
![Page 93
2Scanning Documents
2-58 bizhub 500/420
Scanning Documents
Chapter 2
Original Setting
Specify the type of document that is loaded, for example, if it contains mixed
sizes or is folded in a zigzag.
To specify the Original Settings
1Touch [Scan Settings] in the Scan mode screen.
2Touch [Original Setting].
ItemDescription
Mixed Original Select this setting when documents of different sizes are
loaded into the ADF. The scan speed is decreased since the
size of each page is detected before it is scanned....](http://img.usermanuals.tech/thumb/2790/37212/w300_Konica_Minolta_bizhub_500-92.png "Page 93
2Scanning Documents
2-58 bizhub 500/420
Scanning Documents
Chapter 2
Original Setting
Specify the type of document that is loaded, for example, if it contains mixed
sizes or is folded in a zigzag.
To specify the Original Settings
1Touch [Scan Settings] in the Scan mode screen.
2Touch [Original Setting].
ItemDescription
Mixed Original Select this setting when documents of different sizes are
loaded into the ADF. The scan speed is decreased since the
size of each page is detected before it is scanned....")
2Scanning Documents 2-58 bizhub 500/420 Scanning Documents Chapter 2 Original Setting Specify the type of document that is loaded, for example, if it contains mixed sizes or is folded in a zigzag. To specify the Original Settings 1Touch [Scan Settings] in the Scan mode screen. 2Touch [Original Setting]. ItemDescription Mixed Original Select this setting when documents of different sizes are loaded into the ADF. The scan speed is decreased since the size of each page is detected before it is scanned....
Page 94
![Page 94
Scanning Documents2
bizhub 500/420 2-59
Scanning Documents
Chapter 2
3Specify the original settings.
– If “Original Direction” is selected, a screen for selecting the direc-
tion appears. Select the direction, and then touch [OK].
– To select the default settings, touch [Reset].
– If “Bind” is selected, a screen for selecting the document binding
position appears. Select the binding position, and then touch [OK].
4Touch [OK], and then touch [OK] in the next screen that appears.
Downloaded From...](http://img.usermanuals.tech/thumb/2790/37212/w300_Konica_Minolta_bizhub_500-93.png "Page 94
Scanning Documents2
bizhub 500/420 2-59
Scanning Documents
Chapter 2
3Specify the original settings.
– If “Original Direction” is selected, a screen for selecting the direc-
tion appears. Select the direction, and then touch [OK].
– To select the default settings, touch [Reset].
– If “Bind” is selected, a screen for selecting the document binding
position appears. Select the binding position, and then touch [OK].
4Touch [OK], and then touch [OK] in the next screen that appears.
Downloaded From...")
Scanning Documents2 bizhub 500/420 2-59 Scanning Documents Chapter 2 3Specify the original settings. – If “Original Direction” is selected, a screen for selecting the direc- tion appears. Select the direction, and then touch [OK]. – To select the default settings, touch [Reset]. – If “Bind” is selected, a screen for selecting the document binding position appears. Select the binding position, and then touch [OK]. 4Touch [OK], and then touch [OK] in the next screen that appears. Downloaded From...
Page 95
2Scanning Documents 2-60 bizhub 500/420 Scanning Documents Chapter 2 Book Scanning (Application) Select this function when scanning page spreads. The four scanning meth- ods listed below are available. In addition, frame erasing and center erasing can be specified. Shadows that occur from scanning page spreads can be erased from the scans. 2 Note If the width to be erased is specified using the Book Erase functions in the Book Scanning screen, the same value is set for the “Erase” function on the...
Page 96
![Page 96
Scanning Documents2
bizhub 500/420 2-61
Scanning Documents
Chapter 2
To use the “Book Scan” function
1Touch [Scan Settings] in the Scan mode screen.
2Touch [Application].
3Touch [Book Scanning].
4Specify the Book Scanning settings.
– For details on the “Erase” and “Center Erase” functions, refer to
“Frame Erase (Application)” on page 2-67 and “Center Erase (Ap-
plication)” on page 2-69.
– Select the Position when [Book Separation], [Front Cover], or [Front
and Back Cover] is selected.
Downloaded From...](http://img.usermanuals.tech/thumb/2790/37212/w300_Konica_Minolta_bizhub_500-95.png "Page 96
Scanning Documents2
bizhub 500/420 2-61
Scanning Documents
Chapter 2
To use the “Book Scan” function
1Touch [Scan Settings] in the Scan mode screen.
2Touch [Application].
3Touch [Book Scanning].
4Specify the Book Scanning settings.
– For details on the “Erase” and “Center Erase” functions, refer to
“Frame Erase (Application)” on page 2-67 and “Center Erase (Ap-
plication)” on page 2-69.
– Select the Position when [Book Separation], [Front Cover], or [Front
and Back Cover] is selected.
Downloaded From...")
Scanning Documents2 bizhub 500/420 2-61 Scanning Documents Chapter 2 To use the “Book Scan” function 1Touch [Scan Settings] in the Scan mode screen. 2Touch [Application]. 3Touch [Book Scanning]. 4Specify the Book Scanning settings. – For details on the “Erase” and “Center Erase” functions, refer to “Frame Erase (Application)” on page 2-67 and “Center Erase (Ap- plication)” on page 2-69. – Select the Position when [Book Separation], [Front Cover], or [Front and Back Cover] is selected. Downloaded From...
Page 97
![Page 97
2Scanning Documents
2-62 bizhub 500/420
Scanning Documents
Chapter 2
5Touch [OK], and then touch [OK] in the next two screens that appear.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37212/w300_Konica_Minolta_bizhub_500-96.png "Page 97
2Scanning Documents
2-62 bizhub 500/420
Scanning Documents
Chapter 2
5Touch [OK], and then touch [OK] in the next two screens that appear.
Downloaded From ManualsPrinter.com Manuals")
2Scanning Documents 2-62 bizhub 500/420 Scanning Documents Chapter 2 5Touch [OK], and then touch [OK] in the next two screens that appear. Downloaded From ManualsPrinter.com Manuals
Page 98
![Page 98
Scanning Documents2
bizhub 500/420 2-63
Scanning Documents
Chapter 2
Booklet Pagination (Application)
The left and right pages of a page spread can be scanned separately.
To specify Booklet Pagination settings
1Touch [Scan Settings] in the Scan mode screen.
2Touch [Application].
3Touch [Booklet Pagination].
ItemDescription
Left Bind Select this setting for documents where the pages are bound
on the left side. The left page of the spread will be scanned
first, then the right page.
Right Bind Select this...](http://img.usermanuals.tech/thumb/2790/37212/w300_Konica_Minolta_bizhub_500-97.png "Page 98
Scanning Documents2
bizhub 500/420 2-63
Scanning Documents
Chapter 2
Booklet Pagination (Application)
The left and right pages of a page spread can be scanned separately.
To specify Booklet Pagination settings
1Touch [Scan Settings] in the Scan mode screen.
2Touch [Application].
3Touch [Booklet Pagination].
ItemDescription
Left Bind Select this setting for documents where the pages are bound
on the left side. The left page of the spread will be scanned
first, then the right page.
Right Bind Select this...")
Scanning Documents2 bizhub 500/420 2-63 Scanning Documents Chapter 2 Booklet Pagination (Application) The left and right pages of a page spread can be scanned separately. To specify Booklet Pagination settings 1Touch [Scan Settings] in the Scan mode screen. 2Touch [Application]. 3Touch [Booklet Pagination]. ItemDescription Left Bind Select this setting for documents where the pages are bound on the left side. The left page of the spread will be scanned first, then the right page. Right Bind Select this...
Page 99
![Page 99
2Scanning Documents
2-64 bizhub 500/420
Scanning Documents
Chapter 2
4Select the binding position for the document.
5Touch [OK], and then touch [OK] in the next two screens that appear.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37212/w300_Konica_Minolta_bizhub_500-98.png "Page 99
2Scanning Documents
2-64 bizhub 500/420
Scanning Documents
Chapter 2
4Select the binding position for the document.
5Touch [OK], and then touch [OK] in the next two screens that appear.
Downloaded From ManualsPrinter.com Manuals")
2Scanning Documents 2-64 bizhub 500/420 Scanning Documents Chapter 2 4Select the binding position for the document. 5Touch [OK], and then touch [OK] in the next two screens that appear. Downloaded From ManualsPrinter.com Manuals
Page 100
![Page 100
Scanning Documents2
bizhub 500/420 2-65
Scanning Documents
Chapter 2
Annotations (Application)
When saving a scanned document, add the preset domain name, sequence
number, date, and time, and then save the document in a box.
1Touch [Scan Settings] in the Scan mode screen.
2Press [Application].
3Press [Annotation].
4Select the saving destination for the annotation user box.
5Touch [OK] three times.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37212/w300_Konica_Minolta_bizhub_500-99.png "Page 100
Scanning Documents2
bizhub 500/420 2-65
Scanning Documents
Chapter 2
Annotations (Application)
When saving a scanned document, add the preset domain name, sequence
number, date, and time, and then save the document in a box.
1Touch [Scan Settings] in the Scan mode screen.
2Press [Application].
3Press [Annotation].
4Select the saving destination for the annotation user box.
5Touch [OK] three times.
Downloaded From ManualsPrinter.com Manuals")
Scanning Documents2 bizhub 500/420 2-65 Scanning Documents Chapter 2 Annotations (Application) When saving a scanned document, add the preset domain name, sequence number, date, and time, and then save the document in a box. 1Touch [Scan Settings] in the Scan mode screen. 2Press [Application]. 3Press [Annotation]. 4Select the saving destination for the annotation user box. 5Touch [OK] three times. Downloaded From ManualsPrinter.com Manuals