Konica Minolta bizhub 211 User Manual

							Before making copies4
bizhub 163/211 4-5
2
Note 
The 2nd paper drawer, 3rd paper drawer, 4th paper drawer, 5th paper 
drawer and multi bypass tray are optional.
If the optional duplex unit is used to make double-sided copies, only plain 
and recycled paper can be used.
Number of sets
—: Cannot be specified
Paper type
Weight (g/m2)Plain paperThick paperRecycled paper
Paper source, etc.60 to 90 g/m291 to 157 g/m260 to 90 g/m2
Manual bypass tray 1 sheet 1 sheet 1 sheet
Multi bypass tray 100 sheets 20 sheets 100 sheets
1st paper drawer 250 sheets 20 sheets 250 sheets
2nd paper drawer 250 sheets — 250 sheets
3rd paper drawer 250 sheets — 250 sheets
4th paper drawer 250 sheets — 250 sheets
5th paper drawer 250 sheets — 250 sheets
Paper typeSpecial paper
Paper source, etc.PostcardsOverhead pro-
jector trans-
parenciesLabel sheetsEnvelopes
Manual bypass tray 1 sheet 1 sheet 1 sheet 1
Multi bypass tray 20 sheets 20 sheets 20 sheets 10
1st paper drawer 20 sheets 20 sheets 20 sheets 10
2nd paper drawer — — — —
3rd paper drawer — — — —
4th paper drawer — — — —
5th paper drawer — — — —
Downloaded From ManualsPrinter.com Manuals 
						

							4Before making copies
4-6 bizhub 163/211
2
Note 
The 2nd paper drawer, 3rd paper drawer, 4th paper drawer, 5th paper 
drawer and multi bypass tray are optional.
If the optional duplex unit is used to make double-sided copies, only plain 
and recycled paper can be used.
Paper unsuitable for copies/printouts
The following types of paper should not be used, otherwise decreased 
copy/print quality, paper misfeeds or damage to the machine may occur.
-Overhead projector transparencies that have already been fed through 
the machine
Even if the transparency is still blank, do not reuse it.
-Paper that has been printed on by a heat-transfer printer or an inkjet 
printer
-Paper that is either extremely thick or extremely thin
-Folded, curled, wrinkled, or torn paper
-Paper that has been left unwrapped for a long period of time
-Damp paper
-Perforated paper or paper with punched holes
-Extremely smooth or extremely rough paper, or paper with an uneven 
surface
-Paper that has been treated, such as carbon-backed, heat-sensitive or 
pressure-sensitive paper
-Paper that has been decorated with foil or embossing
-Paper of a non-standard shape (not rectangular)
-Paper that is bound with glue, staples or paper clips
-Paper with labels attached
-Paper with ribbons, hooks, buttons, etc., attached
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies4
bizhub 163/211 4-7
4.2 Copy/print area
Any part of the image within the area indicated below is not copied/printed.
-A margin 4 mm (at full size) from the trailing edge of the paper (A)
-A margin 4 mm (at full size) from the leading edge of the paper (B)
-A margin 4 mm (at full size) on both sides of the paper (C)
!
Detail 
For details when printing from a computer, refer to the user manual for 
the printer driver. If optional image controller IC-206 is installed, refer to 
the user manual for image controller IC-206.
Paper output direction
A, B, C: 4 mm (at full size)
Downloaded From ManualsPrinter.com Manuals 
						

							4Before making copies
4-8 bizhub 163/211
4.3 Paper storage
Observe the following precautions when storing the paper.
-Store the paper in a location that meets the following requirements.
– Not exposed to direct sunlight
– Not exposed to a flame
– Not exposed to high humidity
– Not extremely dusty
-Unwrapped paper should be placed in a plastic bag and stored in a cool, 
dark location.
-Keep paper out of the reach of children.
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies4
bizhub 163/211 4-9
4.4 Loading paper
While loading paper, be sure to observe the following precautions.
-If the paper is curled, flatten it before loading it.
-Do not load so much paper that the top of the stack is higher than the , 
mark or exceeds the specified number of sheets.
Downloaded From ManualsPrinter.com Manuals 
						

							4Before making copies
4-10 bizhub 163/211-Push the paper guides firmly up against the edges of the paper.
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies4
bizhub 163/211 4-11Loading paper into the 1st paper drawer
2
Reminder 
Be careful not to touch the surface of the paper take-up roller with your 
hands.
1Pull out the 1st paper drawer.
2Press down on the paper-lifting plate 
until it locks into place.
Paper take-up roller
Paper-lifting plate
Downloaded From ManualsPrinter.com Manuals 
						

							4Before making copies
4-12 bizhub 163/211
3Load the paper into the drawer.
– Do not load so much paper that 
the top of the stack is higher than 
the , mark.
4Slide the paper guides to fit the size 
of paper being loaded.
– Be sure that the paper guides are 
slid up against the edges of the 
loaded paper.
5Close the 1st paper drawer.
Downloaded From ManualsPrinter.com Manuals 
						

							Before making copies4
bizhub 163/211 4-13Loading paper into the 2nd, 3rd, 4th or 5th paper drawer
1Pull out the drawer.
2Press down on the paper-lifting plate 
until it locks into place.
3Load the paper into the drawer.
– Load the paper so that it fits 
under the tabs and so that the top 
of the stack is not higher than the 
, mark.
Paper-lifting plate
Downloaded From ManualsPrinter.com Manuals 
						

							4Before making copies
4-14 bizhub 163/211
4Slide the paper guides to fit the size 
of paper being loaded.
– Be sure that the paper guides are 
slid up against the edges of the 
loaded paper.
5Close the paper drawer.
Downloaded From ManualsPrinter.com Manuals