Konica Minolta bizhub 211 User Manual

							Making copies5
bizhub 163/211 5-21Loading overhead projector transparencies into the bypass tray
Load overhead projector transparencies into the manual bypass tray one 
sheet at a time.
A maximum of 20 overhead projector transparencies can be loaded into the 
multi bypass tray.
2
Reminder 
After overhead projector transparencies have been loaded, specify the 
paper size and paper type settings from the control panel.
%Load the overhead projector transparencies in either the w or v 
orientation, depending on the orientation of the document.
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-22 bizhub 163/211– For details on specifying the settings for the paper size and paper 
type, refer to steps 4 through 7 of the procedures in Copying onto 
manually fed paper (manual bypass tray) on page 5-28 and 
Copying onto manually fed paper (multi bypass tray) on 
page 5-31.
– The relationship between the document image orientation and the 
orientation of the copy image printed on the overhead projector 
transparency is shown below.
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-23Loading label sheets into the bypass tray
Load label sheets into the manual bypass tray one sheet at a time.
A maximum of 20 label sheets can be loaded into the multi bypass tray.
2
Reminder 
After label sheets have been loaded, specify the paper size and paper 
type settings from the control panel.
%Load the label sheets in either the w or v orientation, depending on the 
orientation of the document, with the side to be printed on facing down.
– For details on specifying the settings for the paper size and paper 
type, refer to steps 4 through 7 of the procedures in Copying onto 
manually fed paper (manual bypass tray) on page 5-28 and 
Copying onto manually fed paper (multi bypass tray) on 
page 5-31.
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-24 bizhub 163/211– The relationship between the document image orientation and the 
orientation of the copy image printed on the label sheet is shown 
below.
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-25Loading envelopes into the bypass tray
Load envelopes into the manual bypass tray one at a time.
A maximum of 10 envelopes can be loaded into the multi bypass tray.
2
Reminder 
Before loading envelopes, press them down to make sure that all air is 
removed, and make sure that the folds of the flaps are firmly pressed, 
otherwise the envelopes may become wrinkled or a paper misfeed may 
occur.
After envelopes have been loaded, specify the paper size and paper type 
settings from the control panel.
%Load envelopes with the flap side facing up, as shown in the 
illustration.
– For details on specifying the settings for the paper size and paper 
type, refer to steps 4 through 7 of the procedures in Copying onto 
manually fed paper (manual bypass tray) on page 5-28 and 
Copying onto manually fed paper (multi bypass tray) on 
page 5-31.
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-26 bizhub 163/211– The relationship between the document image orientation and the 
orientation of the copy image printed on the envelope is shown 
below.
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-27
2
Reminder 
Envelopes cannot be loaded in the v orientation.
Do not load envelopes with the flap side facing down.
Do not load envelopes with the flap inserted last.
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-28 bizhub 163/211Copying onto manually fed paper (manual bypass tray)
2
Reminder 
When loading thick paper or postcards, be sure to flatten them if they are 
curled.
1Position the document to be copied.
– Refer to Loading the document on page 4-18.
2Insert one sheet of paper with the 
side to be printed on facing down, 
lightly sliding the paper as much as 
possible into the feed slot.
The BYPASS PAPER SETTING menu 
appears.
3Slide the paper guides to fit the size 
of paper being loaded.
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-29
4Press the [+] or [,] key until SIZE is selected, and then press the [OK] 
key.
5Press the [+] or [,] key until the appropriate paper size is selected, and 
then press the [OK] key.
The BYPASS PAPER SETTING menu appears again.
6Press the [+] or [,] key until MEDIA is selected, and then press the 
[OK] key.
BYPASS PAPER SETTING
 MEDIA:PLAIN
RETURN
SIZE:
BYPASS PAPER SIZE
BYPASS PAPER SETTING
MEDIA:PLAIN
RETURN
SIZE:
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-30 bizhub 163/211
7Press the [+] or [,] key until the appropriate paper type is selected, and 
then press the [OK] key.
– PLAIN, TRANSPARENCY, CARD or ENVELOPE are 
available as paper type settings.
The BYPASS PAPER SETTING menu appears again.
8Select RETURN.
– To change the paper size or type setting, remove the inserted 
paper, and then repeat steps 2 through 8.
The main screen appears.
9If necessary, specify any other copy settings.
– Refer to Specifying a zoom setting on page 5-53.
– Refer to Selecting a density setting on page 5-61.
– Refer to Advanced copy operations on page 6-3.
10Press the [Start] key.
– To copy additional pages with the same settings, loading paper into 
the manual bypass tray automatically starts copying.
– To copy continuously on thick paper, postcards, overhead 
projector transparencies or envelopes, use the 1st paper drawer.
BYPASS MEDIA TYPE
TRANSPARENCY
PLAIN
CARD
Downloaded From ManualsPrinter.com Manuals