Konica Minolta bizhub 211 User Manual

							Making copies5
bizhub 163/211 5-11
5.2 Stopping/restarting/canceling a copy job
Follow the procedure described below to stop a copy job.
1Select the desired copy settings, and then press the [Start] key.
Copying begins.
2During copying, press the 
[Clear/Stop] key. The message 
>>Please Wait appears, and the 
job is stopped.
– To continue the stopped job, select NO, and then press the [OK] 
key.
JOB CANCEL
NO
YES
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-12 bizhub 163/211– To delete the stopped job, select YES, and then press the [OK] 
key.
JOB CANCEL
NO
YES
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-13
5.3 Selecting the paper source
1Position the document to be copied.
– Refer to Loading the document on page 4-18.
2Press the [Paper] key.
3Press the [+] or [,] key until AUTO or the desired paper drawer is 
selected, and then press the [OK] key.
The main screen appears again.
4If necessary, specify any other copy settings.
– Refer to Specifying a zoom setting on page 5-53.
– Refer to Selecting a density setting on page 5-61.
– Refer to Advanced copy operations on page 6-3.
5Press the [Start] key.
PAPER SELECT
TRAY1:
AUTO
TRAY2:
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-14 bizhub 163/211
!
Detail 
If NO SUITABLE PAPER appears in the display after AUTO is 
selected and the [Start] key is pressed, no paper tray or drawer is loaded 
with paper of the most suitable size. Either load paper with the 
appropriate size, or select a paper drawer, and then press the [Start] key 
again.
Automatic tray switching feature
With the automatic tray switching feature, copying/printing can continue with 
paper from a different paper drawer if the currently selected drawer runs out 
of paper during copying/printing.
The automatic tray switching operation is performed if the currently selected 
paper drawer and another paper drawer (other than the manual bypass tray) 
meet the following conditions.
-The paper loaded in the paper drawer is the same size.
-The paper loaded in the paper drawer is the same type.
-The paper loaded in the paper drawer is in the same orientation.
-Either PLAIN or RECYCLE is selected for the type of paper loaded in 
each paper drawer.
!
Detail 
If paper is loaded into the manual bypass tray, the automatic tray 
switching operation is not performed.
If the optional multi bypass tray, 2nd paper drawer, 3rd paper drawer, 4th 
paper drawer and 5th paper drawer are installed, a maximum of 1,350 
pages can be continuously copied/printed. When continuously 
copying/printing a large number of pages, load all paper drawers (except 
the manual bypass tray) with paper meeting the conditions listed above.
If there is no paper in any paper drawer, a message appears indicating 
that paper must be replenished. Copying/printing may not continue if 
paper is loaded into other paper drawers than the one specified in the 
message.
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-15Order for automatically switching paper drawers
When automatic tray switching operation is performed, the next paper 
drawer in the following list is chosen.
1st paper drawer % 2nd paper drawer % 3rd paper drawer % 4th paper 
drawer % 5th paper drawer % Multi bypass tray
!
Detail 
If a setting for special paper (such as overhead projector transparencies 
or label sheets) is selected for the 1st paper drawer or multi bypass tray, 
that paper drawer will not be selected automatically with the automatic 
tray switching feature. For details on selecting settings for special paper, 
refer to Specifying settings for the paper loaded into the 1st paper 
drawer (TRAY1 PAPER parameter) on page 7-24 or Copying onto 
manually fed paper (multi bypass tray) on page 5-31.
A paper drawer with a special paper setting selected will not be selected 
automatically with the automatic tray switching feature. For details on 
selecting a setting for special paper, refer to Specifying special paper 
settings for paper drawers (PAPER TYPE parameter) on page 7-28.
If the default paper drawer is selected in Utility mode, that paper drawer 
is selected as a default. For details on selecting the default paper drawer, 
refer to Selecting the default paper drawer (PAPER PRIORITY 
parameter) on page 7-58.
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-16 bizhub 163/211
5.4 Making copies on manually fed paper
Manually feed the copy paper if you wish to make copies onto paper not 
loaded into any paper drawer or onto special paper, such as overhead 
projector transparencies, postcards or thick paper.
2
Reminder 
When copying with the manual bypass tray, load the paper one sheet at 
a time.
!
Detail 
For details on the number of pages that can loaded into the multi bypass 
tray (optional), refer to page 4-5.
Paper that can be fed manually
Paper types:
-Plain paper, recycled paper (paper thickness: 60 g/m
2 to 90 g/m2)
-Special paper
– Thick paper (paper thickness: 91 g/m
2 to 157 g/m2)
– Overhead projector transparencies
– Postcards
– Label sheets
–Envelopes
Paper sizes:
-Maximum size: 297 mm e 432 mm
-Minimum size: 90 mm e 140 mm
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-17Adjusting the multi bypass tray
The bypass tray extension can be adjusted to fit the size of paper to be 
loaded, as shown below.
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-18 bizhub 163/211Loading plain paper into the bypass tray
Load the paper into the manual bypass tray one sheet at a time.
A maximum of 100 sheets of paper can be loaded into the multi bypass tray. 
Do not load so much paper into the multi bypass tray that the top of the stack 
is higher than the , mark.
2
Note 
When paper other than plain paper is loaded, the paper type setting must 
be specified from the control panel.
2
Reminder 
Load the paper so that the side to be printed on faces down.
Make sure that the paper is not curled (rolled).
1Load the paper into the manual bypass tray.
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-19
2Adjust the tray extension and the paper guides to fit the size of paper 
being loaded.
– For details on specifying the settings for the paper size and paper 
type, refer to steps 4 through 7 of the procedures in Copying onto 
manually fed paper (manual bypass tray) on page 5-28 and 
Copying onto manually fed paper (multi bypass tray) on 
page 5-31.
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-20 bizhub 163/211– The relationship between the document image orientation and the 
orientation of the copy image printed on the paper is shown below.
Downloaded From ManualsPrinter.com Manuals