Konica Minolta bizhub 211 User Manual

							Utility mode/Copy mode parameters7
bizhub 163/211 7-57Displaying the COPY SETTING 1 menu
1Press the [Utility] key.
The UTILITY MODE menu appears.
2Press the [+] or [,] key until COPY SETTING 1 is selected, and then 
press the [OK] key.
The COPY SETTING 1 menu appears.
3Press the [+] or [,] key until the desired COPY SETTING 1 parameter 
is selected, and then press the [OK] key.
– The following COPY SETTING 1 parameters are available.
PAPER PRIORITY
QUALITY PRIORITY
DENSITY PRIORITY
DENSITY LEVEL (A)
DENSITY LEVEL (M)
BINDING POSITION
MARGIN SETTING
ERASE SETTING
SMALL ORIGINAL
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-58 bizhub 163/211Selecting the default paper drawer (PAPER PRIORITY parameter)
1Display the COPY SETTING 1 menu.
– Refer to Displaying the COPY SETTING 1 menu on page 7-57.
2Press the [+] or [,] key until PAPER PRIORITY is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until the desired default paper drawer is 
selected, and then press the [OK] key.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
QUALITY PRIORITY
PAPER PRIORITY
DENSITY PRIORITY
PAPER PRIORITY
TRAY2
TRAY1
TRAY3
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-59– If the multi bypass tray is installed, the following screen appears.
The COPY SETTING 1 menu appears again.
2
Note 
If there are multiple paper drawers loaded with paper of the same size 
and type as that loaded into the paper drawer given priority with the 
PAPER PRIORITY parameter, and if all of these paper drawers become 
empty, a message may appear indicating that paper be loaded into a 
paper drawer that was not given priority. At that time, load paper 
according to the message that appears.
PAPER PRIORITY
TRAY5
TRAY4
MULTI BYPASS
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-60 bizhub 163/211Selecting the default image quality (QUALITY PRIORITY parameter)
1Display the COPY SETTING 1 menu.
– Refer to Displaying the COPY SETTING 1 menu on page 7-57.
2Press the [+] or [,] key until QUALITY PRIORITY is selected, and 
then press the [OK] key.
3Press the [+] or [,] key until the desired default image quality is 
selected, and then press the [OK] key.
The COPY SETTING 1 menu appears again.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
QUALITY PRIORITY
PAPER PRIORITY
DENSITY PRIORITY
QUALITY PRIORITY
TEXT
TEXT/PHOTO
PHOTO
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-61Selecting the default density (DENSITY PRIORITY parameter)
1Display the COPY SETTING 1 menu.
– Refer to Displaying the COPY SETTING 1 menu on page 7-57.
2Press the [+] or [,] key until DENSITY PRIORITY is selected, and 
then press the [OK] key.
3Press the [+] or [,] key until AUTO or MANUAL is selected, and 
then press the [OK] key.
The COPY SETTING 1 menu appears again.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
QUALITY PRIORITY
PAPER PRIORITY
DENSITY PRIORITY
DENSITY PRIORITY
MANUAL
AUTO
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-62 bizhub 163/211Selecting the default AUTO density level (DENSITY LEVEL (A) 
parameter)
1Display the COPY SETTING 1 menu.
– Refer to Displaying the COPY SETTING 1 menu on page 7-57.
2Press the [+] or [,] key until DENSITY LEVEL is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until AUTO is selected, and then press the 
[OK] key.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
BINDING POSITION
DENSITY LEVEL
MARGIN SETTING
DENSITY LEVEL
MANUAL
AUTO
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-63
4Press the [*] or [)] key until the desired density level is selected, and 
then press the [OK] key.
The COPY SETTING 1 menu appears again.
DENSITY LEVEL(A)
OK
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-64 bizhub 163/211Selecting the default MANUAL density level (DENSITY LEVEL (M) 
parameter)
1Display the COPY SETTING 1 menu.
– Refer to Displaying the COPY SETTING 1 menu on page 7-57.
2Press the [+] or [,] key until DENSITY LEVEL is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until MANUAL is selected, and then press the 
[OK] key.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
BINDING POSITION
DENSITY LEVEL
MARGIN SETTING
DENSITY LEVEL
MANUAL
AUTO
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-65
4Press the [*] or [)] key until the desired density level is selected, and 
then press the [OK] key.
The COPY SETTING 1 menu appears again.
DENSITY LEVEL(M)
OK
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-66 bizhub 163/211Selecting the book binding position (BINDING POSITION parameter)
1Display the COPY SETTING 1 menu.
– Refer to Displaying the COPY SETTING 1 menu on page 7-57.
2Press the [+] or [,] key until BINDING POSITION is selected, and 
then press the [OK] key.
3Press the [+] or [,] key until LEFT or RIGHT is selected, and then 
press the [OK] key.
The COPY SETTING 1 menu appears again.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
BINDING POSITION
DENSITY LEVEL
MARGIN SETTING
BINDING POSITION
RIGHT
LEFT
Downloaded From ManualsPrinter.com Manuals