Konica Minolta bizhub 211 User Manual

							Utility mode/Copy mode parameters7
bizhub 163/211 7-67Adjusting the margin width (MARGIN SETTING parameter)
1Display the COPY SETTING 1 menu.
– Refer to Displaying the COPY SETTING 1 menu on page 7-57.
2Press the [+] or [,] key until MARGIN SETTING is selected, and then 
press the [OK] key.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
BINDING POSITION
DENSITY LEVEL
MARGIN SETTING
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-68 bizhub 163/211
3Use the keypad to type in margin width, and then press the [OK] key.
– The binding width can be set between 0 and 20 mm.
– To correct the entered number, press the [Clear/Stop] key, and then 
use the keypad to type in the correct number.
The COPY SETTING 1 menu appears again.
MARGIN SETTING
10mm(0-20mm)
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-69Adjusting the width of the erased area (ERASE SETTING parameter)
1Display the COPY SETTING 1 menu.
– Refer to Displaying the COPY SETTING 1 menu on page 7-57.
2Press the [+] or [,] key until ERASE SETTING is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until LEFT, UPPER or FRAME is selected, 
and then press the [OK] key.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
SMALL ORIGINAL
ERASE SETTING
RETURN
ERASE SETTING
UPPER
LEFT
FRAME
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-70 bizhub 163/211
4Use the keypad to type in width to be erased, and then press the [OK] 
key.
– The width of the area to be erased can be set between 5 and 
20 mm.
– To correct the entered number, press the [Clear/Stop] key, and then 
use the keypad to type in the correct number.
The COPY SETTING 1 menu appears again.
ERASE SETTING(LEFT)
10mm(5-20mm)
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-71Selecting the setting for small-sized documents (SMALL ORIGINAL 
parameter)
1Display the COPY SETTING 1 menu.
– Refer to Displaying the COPY SETTING 1 menu on page 7-57.
2Press the [+] or [,] key until SMALL ORIGINAL is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until ENABLE or DISABLE is selected, and 
then press the [OK] key.
The COPY SETTING 1 menu appears again.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
SMALL ORIGINAL
ERASE SETTING
RETURN
SMALL ORIGINAL
ENABLE
DISABLE
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-72 bizhub 163/211
7.9 COPY SETTING 2
The settings that are selected when the machine is turned on or when the 
[Reset] key is pressed are called the default settings. The default copy 
settings can be changed from the COPY SETTING 1 and COPY SETTING 
2 menus.
COPY SETTING 2 parameters
No.COPY SETTING 2Description
1 COPY  PRIORITY This parameter can be used to select whether the AUTO Pa-
per setting or the AUTO Zoom setting is selected or the set-
ting is selected manually in Copy mode when the machine is 
turned on or the [Reset] key is pressed.
The manufacturer’s default setting is AUTO PAPER SE-
LECT.
2 OUTPUT PRIORITY This parameter can be used to select NON-SORT, SORT 
or GROUP for the default Finishing setting selected when 
the machine is turned on or the [Reset] key is pressed.
The manufacturer’s default setting is NON-SORT.
3 4IN1 COPY ORDER This parameter can be used to select the copy order during 
4in1 copying.
The manufacturer’s default setting is PATTERN1.
4 MIXED ORIGINAL This parameter can be used to select whether or not the 
Mixed Original setting is selected when the machine is 
turned on or the [Reset] key is pressed.
A setting can be selected for this parameter only if the optional 
document feeder or reverse automatic document feeder is in-
stalled.
The manufacturer’s default setting is OFF.
5 DUPLEX COPY This parameter can be used to select whether or not double-
sided printing is used. The optional duplex unit must be in-
stalled (option for bizhub 211 only).
The manufacturer’s default setting is OFF.
6 CRISSCROSS MODE This parameter can be used to select whether or not copies 
are fed out in a crisscross pattern when the crisscross output 
conditions are met.
This parameter is not available if shift tray SF-501 is installed.
The manufacturer’s default setting is ON.
12
3413
24
Pattern 1 Pattern 2
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-73Displaying the COPY SETTING 2 menu
1Press the [Utility] key.
The UTILITY MODE menu appears.
2Press the [+] or [,] key until COPY SETTING 2 is selected, and then 
press the [OK] key.
The COPY SETTING 2 menu appears.
3Press the [+] or [,] key until the desired COPY SETTING 2 parameter 
is selected, and then press the [OK] key.
– The following COPY SETTING 1 parameters are available.
COPY PRIORITY
OUTPUT PRIORITY
4IN1 COPY ORDER
MIXED ORIGINAL
DUPLEX COPY
CRISSCROSS MODE
UTILITY MODE
RETURN
COPY SETTING 2
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-74 bizhub 163/211Selecting the default copy settings (COPY PRIORITY parameter)
1Display the COPY SETTING 2 menu.
– Refer to Displaying the COPY SETTING 2 menu on page 7-73.
2Press the [+] or [,] key until COPY PRIORITY is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until AUTO PAPER SELECT, AUTO ZOOM 
or MANUAL is selected, and then press the [OK] key.
The COPY SETTING 2 menu appears again.
UTILITY MODE
RETURN
COPY SETTING 2
COPY SETTING 2
OUTPUT PRIORITY
COPY PRIORITY
4IN1 COPY ORDER
COPY PRIORITY
AUTO ZOOM
AUTO PAPER SELECT
MANUAL
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-75Selecting the default Finishing setting (OUTPUT PRIORITY parameter)
1Display the COPY SETTING 2 menu.
– Refer to Displaying the COPY SETTING 2 menu on page 7-73.
2Press the [+] or [,] key until OUTPUT PRIORITY is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until NON-SORT, SORT or GROUP is 
selected, and then press the [OK] key.
The COPY SETTING 2 menu appears again.
UTILITY MODE
RETURN
COPY SETTING 2
COPY SETTING 2
OUTPUT PRIORITY
COPY PRIORITY
4IN1 COPY ORDER
OUTPUT PRIORITY
SORT
NON-SORT
GROUP
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-76 bizhub 163/211Selecting the 4in1 page order (4IN1 COPY ORDER parameter)
1Display the COPY SETTING 2 menu.
– Refer to Displaying the COPY SETTING 2 menu on page 7-73.
2Press the [+] or [,] key until 4IN1 COPY ORDER is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until PATTERN1 or PATTERN2 is selected, 
and then press the [OK] key.
UTILITY MODE
RETURN
COPY SETTING 2
COPY SETTING 2
OUTPUT PRIORITY
COPY PRIORITY
4IN1 COPY ORDER
4IN1 COPY ORDER
PATTERN2
PATTERN1
Downloaded From ManualsPrinter.com Manuals