Konica Minolta bizhub 211 User Manual

							Utility mode/Copy mode parameters7
bizhub 163/211 7-7Displaying the MACHINE SETTING menu
1Press the [Utility] key.
The UTILITY MODE menu appears.
2Press the [+] or [,] key until MACHINE SETTING is selected, and 
then press the [OK] key.
3Press the [+] or [,] key until the desired MACHINE SETTING parameter 
is selected.
– The following MACHINE SETTING parameters are available.
AUTO PANEL RESET
ENERGY SAVE MODE
AUTO SHUT OFF
DENSITY (ADF)
DENSITY (BOOK)
PRINT DENSITY
LCD CONTRAST
KEY SPEED SETTING
LANGUAGE
SCAN THRESHOLD
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-8 bizhub 163/211Changing settings for the auto panel reset operation (AUTO PANEL 
RESET parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until AUTO PANEL RESET is selected, and 
then press the [OK] key.
3Press the [+] or [,] key until OFF, 30sec, 1min, 2min, 3min, 
4min or 5min is selected, and then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
ENERGY SAVE MODE
AUTO PANEL RESET
AUTO SHUT OFF
AUTO PANEL RESET
30sec
OFF
1min
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-9Specifying energy-saving (Power Save mode) settings (ENERGY SAVE 
MODE parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until ENERGY SAVE MODE is selected, and 
then press the [OK] key.
3Use the keypad to type in the length of time until the machine enters 
Power Save mode, and then press the [OK] key.
– The time can be set between 1 and 240 minutes.
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
ENERGY SAVE MODE
AUTO PANEL RESET
AUTO SHUT OFF
ENERGY SAVE MODE
15min(1-240min)
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-10 bizhub 163/211– To correct the entered number, press the [Clear/Stop] key, and then 
type in the correct number.
The MACHINE SETTING menu appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-11Changing settings for the auto shut-off operation (AUTO SHUT OFF 
parameter)
Select whether or not to turn off the auto shut-off feature. If it is turned on, 
specify the length of time until the auto shut-off operation is performed.
2
Note 
If the machine is turned off with the auto shut-off operation, copies/print-
outs cannot be printed. To print copies/printouts, turn on the machine.
The auto shut-off feature cannot be turned off if the AUTO SHUT OFF 
parameter in the ADMIN. MANAGEMENT menu is set to DISABLE. In 
order to turn off the auto shut-off feature, the AUTO SHUT OFF 
parameter in the ADMIN. MANAGEMENT menu must first be set to 
ENABLE. For details, refer toEnabling the AUTO SHUT OFF 
parameter to be set to OFF (AUTO SHUT OFF parameter) on 
page 7-43.
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until AUTO SHUT OFF is selected, and then 
press the [OK] key.
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
ENERGY SAVE MODE
AUTO PANEL RESET
AUTO SHUT OFF
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-12 bizhub 163/211
3Press the [+] or [,] key until OFF or ON is selected.
– If OFF was selected, press the [OK] key.
– If ON was selected, use the keypad to type in the length of time 
until the auto shut-off operation is performed, and then press the 
[OK] key.
– The time can be set between 15 and 240 minutes.
– To correct the entered number, press the [Clear/Stop] key, and then 
type in the correct number.
– If the AUTO SHUT OFF parameter in the ADMIN. 
MANAGEMENT menu is set to DISABLE, specify only the length 
of time until the auto shut-off operation is performed.
The MACHINE SETTING menu appears again.
AUTO SHUT OFF
ON
OFF
AUTO SHUT OFF
ON
OFF
30min(1-240min)
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-13Changing the image quality level when the document feeder is used 
(DENSITY (ADF) parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until DENSITY (ADF) is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until MODE1 or MODE2 is selected, and 
then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
DENSITY(BOOK)
DENSITY(ADF)
PRINT DENSITY
DENSITY(ADF)
MODE2
MODE1
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-14 bizhub 163/211Changing the image quality level when the original glass is used 
(DENSITY (BOOK) parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until DENSITY (BOOK) is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until MODE1 or MODE2 is selected, and 
then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
DENSITY(BOOK)
DENSITY(ADF)
PRINT DENSITY
DENSITY(BOOK)
MODE2
MODE1
Downloaded From ManualsPrinter.com Manuals 
						

							Utility mode/Copy mode parameters7
bizhub 163/211 7-15Changing the print density (PRINT DENSITY parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until PRINT DENSITY is selected, and then 
press the [OK] key.
3Press the [*] or [)] key until the desired density level is selected, and 
then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
DENSITY(BOOK)
DENSITY(ADF)
PRINT DENSITY
PRINT DENSITY
OK
Downloaded From ManualsPrinter.com Manuals 
						

							7Utility mode/Copy mode parameters
7-16 bizhub 163/211Changing the display contrast (LCD CONTRAST parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until LCD CONTRAST is selected, and then 
press the [OK] key.
3Press the [*] or [)] key until the desired contrast is selected, and then 
press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
KEY SPEED SETTING
LCD CONTRAST
LANGUAGE
LCD CONTRAST
OK
Downloaded From ManualsPrinter.com Manuals