Konica Minolta bizhub 211 User Manual

							Making copies5
bizhub 163/211 5-31Copying onto manually fed paper (multi bypass tray)
2
Reminder 
When loading thick paper or postcards, be sure to flatten them if they are 
curled.
1Position the document to be copied.
– Refer to Loading the document on page 4-18.
2Load the paper with the side to be 
printed on facing down, lightly sliding 
the paper as much as possible into 
the feed slot.
The BYPASS PAPER SETTING menu 
appears.
3Adjust the tray extension and the 
paper guides to fit the size of paper 
being loaded.
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-32 bizhub 163/211
4Press the [+] or [,] key until SIZE is selected, and then press the [OK] 
key.
5Press the [+] or [,] key until the appropriate paper size is selected, and 
then press the [OK] key.
The BYPASS PAPER SETTING menu appears again.
6Press the [+] or [,] key until MEDIA is selected, and then press the 
[OK] key.
BYPASS PAPER SETTING
 MEDIA:PLAIN
RETURN
SIZE:
BYPASS PAPER SIZE
BYPASS PAPER SETTING
MEDIA:PLAIN
RETURN
SIZE:
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-33
7Press the [+] or [,] key until the appropriate paper type is selected, and 
then press the [OK] key.
– PLAIN, TRANSPARENCY, CARD or ENVELOPE are 
available as paper type settings.
The BYPASS PAPER SETTING menu appears again.
8Select RETURN.
– To change the paper size or type setting, remove the inserted 
paper, and then repeat steps 2 through 8.
The main screen appears.
9If necessary, specify any other copy settings.
– Refer to Specifying a zoom setting on page 5-53.
– Refer to Selecting a density setting on page 5-61.
– Refer to Advanced copy operations on page 6-3.
10Press the [Start] key.
BYPASS MEDIA TYPE
TRANSPARENCY
PLAIN
CARD
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-34 bizhub 163/211
5.5 Copying onto various types of media
Copying onto overhead projector transparencies
As an example, the following procedure describes how to make copies onto 
overhead projector transparencies loaded into the 1st paper drawer.
1Position the document to be copied.
– Refer to Loading the document on page 4-18.
2Adjust the paper guides in the 1st 
paper drawer, and then load the 
overhead projector transparencies 
into the drawer.
– Load the overhead projector 
transparencies in either the w or 
v orientation, depending on the 
orientation of the document.
– A maximum of 20 overhead 
projector transparencies can be 
loaded.
3Press the [Utility] key.
The UTILITY MODE menu appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-35
4Press the [+] or [,] key until PAPER SOURCE SETUP is selected, 
and then press the [OK] key.
5Press the [+] or [,] key until TRAY1 PAPER is selected, and then 
press the [OK] key.
6Press the [+] or [,] key until PAPER SIZE is selected, and then press 
the [OK] key.
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
PAPER SOURCE SETUP
TRAY1 PAPER
INCH/METRIC
PAPER TYPE
TRAY1 PAPER
MEDIA TYPE
PAPER SIZE
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-36 bizhub 163/211
7Press the [+] or [,] key until AUTO is selected, and then press the 
[OK] key.
8Press the [+] or [,] key until MEDIA TYPE is selected, and then press 
the [OK] key.
9Press the [+] or [,] key until TRANSPARENCY is selected, and then 
press the [OK] key.
10Press the [Back] key twice.
TRAY1 PAPER SIZE
SIZE INPUT
AUTO
MEMORY1:[216/279]
TRAY1 PAPER
MEDIA TYPE
PAPER SIZE
TRAY1 MEDIA TYPE
TRANSPARENCY
PLAIN
CARD
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-37
11If necessary, specify any other copy settings.
– Refer to Before making copies on page 4-3.
– Refer to Advanced copy operations on page 6-3.
12Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-38 bizhub 163/211Copying onto label sheets
As an example, the following procedure describes how to make copies onto 
200 mm e 250 mm label sheets loaded into the 1st paper drawer.
1Position the document to be copied.
– Refer to Loading the document on page 4-18.
2Adjust the paper guides in the 1st paper drawer, and then load the label 
sheets into the drawer.
– Load the label sheets so that the 
side to be printed on faces up, as 
shown in the illustration.
3Press the [Utility] key.
The UTILITY MODE menu appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Making copies5
bizhub 163/211 5-39
4Press the [+] or [,] key until PAPER SOURCE SETUP is selected, 
and then press the [OK] key.
5Press the [+] or [,] key until TRAY1 PAPER is selected, and then 
press the [OK] key.
6Press the [+] or [,] key until PAPER SIZE is selected, and then press 
the [OK] key.
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
PAPER SOURCE SETUP
TRAY1 PAPER
INCH/METRIC
PAPER TYPE
TRAY1 PAPER
MEDIA TYPE
PAPER SIZE
Downloaded From ManualsPrinter.com Manuals 
						

							5Making copies
5-40 bizhub 163/211
7Press the [+] or [,] key until SIZE INPUT is selected, and then press 
the [OK] key.
8Use the keypad to type in 200 for the length (X), and then press the 
[OK] key.
9Use the keypad to type in 250 for the width (Y), and then press the 
[OK] key.
The PAPER SOURCE SETUP menu appears again.
TRAY1 PAPER SIZE
SIZE INPUT
AUTO
MEMORY1:[216/279]
TRAY1 PAPER SIZE
 Y=279( 90-297)
 X=200(140-432)  x
TRAY1 PAPER SIZE
 Y=279( 90-297)
 X=200(140-432)  x
Downloaded From ManualsPrinter.com Manuals