JVC Projector Dla Rs60u3d Instructions Manual

							41
ENGLISH
[2]  Layers and organization of the input signal submenu
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
ExitMENU BACKBack
Select Operate
Aspect(Video)
Progressive
 HDMI
COMP.
Mask
Auto
PC　
Picture Position
16:9 Off
Input Signal
ExitMENU BACKBack
Select Operate
Aspect(Video)
Progressive
 HDMI
COMP.
Mask
Auto
Picture Position16:9 Off
Input Signal
ExitMENU BACKBack
Select Operate
Input Signal
 COMP.
Y Pb/Cb Pr/CrColor Space
ExitMENU
BACKBack
Select Operate
Level Check
Input Signal
 HDMI
OffControl with HDMI　
AutoColor Space
　
Auto3D Format　
EnhancedInput
ExitMENU BACKBack
Select Operate
Input Signal
 PC
16Phase　
2200Tracking　
Picture Position 　
Auto Alignment
[2]  Input Signal
[2-3]   PC
[2-2]  
COMP .
[2-1]  
HDMI
[2-3]
[2-2]
[2-2]
[2-1]
[2-1]
COM
COM
RS50RS5 0RS60
RS50RS50RS60
RS50RS50RS40 
 Operation    
						

							42
Operation
3
A dju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Layers and organization of the submenus [3] installation and [5] function 
ExitMENU BACKBack
Select Operate
Trigger
Off Timer
Communication TerminalNetwork
Lamp Reset High Altitude ModeLAN
Off
Off
Off
Function
ExitMENU BACKBack
Select Operate
IP Address　
Subnet Mask
Default Gateway
 Network
DHCP ClientOff
Function
Set
MAC Address     :AA-BB-CC-DD-EE-FF 192. 168.    0.254 255. 255. 255.   0 192. 168.    0.   2
ExitMENU
BACKBack
Select Operate
Pixel Adjust　
Installation
Lens Control
KeystoneAnamorphic
Screen Adjust
Black Level
Installation StyleFront
Off
ExitMENU BACKBack
Select Operate
LockOff
Zoom　
 Shift
OnImage Pattern
AutoLens Cover
Installation
 Lens Control
Focus
ExitMENU BACKBack
Select Operate
Horiz. Green　
Horiz. Blue
Installation
 Pixel Adjust
Vert. Red
Vert. Green
Vert. Blue
3
3
3
3
3
Horiz. Red3
[3-2]   Pixel  Adjust
[3-2]
[5-1]  Network
[5-1] [3-1] Lens Control 
[3-1]
[3]   Installation
[5]   Function
COM
COM
COM
(*)
(*)  MAC address is dif ferent 
depending on the 
respective equipment
RS50RS5 0RS60RS50RS50RS60     
						

							43
ENGLISH
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Menu operation button
MENU
MENU
OK OK
BACK
BACK
Button
This unit
 Remote ControlFunction
Menu is displayed.
W h i l e   t h e   m e n u   i s   d i s p l a y e d ,  
t h e   m e n u   s c r e e n   i s   t u r n e d   o f f .  
While showing Main menu (Layer 1) 
selected items are confirmed, and 
Submenu (Layer 2) will be displayed.
When the submenu is displayed, press 
OK, and the displayed items in the 
selection are moved to the 
Setting screen (Layer 3). 
Return to the previous menu screen.
The menu screen is turned off when 
the main menu screen is shown. 
This unit
Remote Control
Displaying the main menu and the 
submenu Select an adjustment item in the 
menu. Set the setting value of the 
selected adjustment item. The 
adjusted setting value is immediately 
reflected in the image.
Selection of a displayed sub-menu 
item. Selection of an item in the 
menu.
：
/
/ ：
Operate the menu by use of the buttons on the main body or the 
remote control.
STANDBY/ON
MENUBACK
INPUT
OK
BACK
HIDE
LIGHT
LENS AP.C.M.D
  PC
HDMI 1
STAND BY
ASPECT
HDMI 2
ANAMO
COMP.
LENS.CONTROL
MENU
GAMMAP.FILE
COLORADJ. PIC.
      ON
FILM
NATURALSTAGE
3D
USER1 USER2
  THX
ANIME
CINEMAPICTURE MODE
INPUT
TEMP
COLOR
Menu 
operation 
buttons
Menu 
operation 
buttons
RS50RS5
0RS60 
 Operation    
						

							44
Operation
3
A dju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Menu operation procedure
1 Press MENU.
The main menu is displayed on the screen.
Picture Adjust
ResetAdvancedExitMENU BACKBack
Select Operate
Color Temp.
Gamma
Film Tone
ContrastBrightness
Color
Tint00
00
Color ProfilePicture ModeFilm
Film1 
Xenon1Film1
The submenu items, which are currently 
selected, are shown. Currently selected menu 
items are highlighted and the icon is colored 
in orange. 
The submenu items, which are currently 
selected, are displayed.
Example: Picture  Adjust  
2 Press cursor  ( / ) to select a submenu.
●   A  submenu (picture adjust, input signal, installation, display 
setup, function, information) is selected:
●  If one selects "Information", information about the currently 
selected video input and PC input  are displayed at the bottom 
of the menu.
3 Press OK or cursor ( /).
● Sub-menu item is displayed.
● Sub-menu items vary depending on the input signal and the 
picture mode. See "Content menu" on the next page for more 
details. 
4   Press the cursor ( /) to select the items to 
adjust.  
If the name of a submenu item is displayed in a dimmed manner , 
it cannot be selected.
5   Press cursor ( / ) to change settings.
6    After adjusting, press BACK. 
Every time it is pressed, you will return to the respective previous 
menu screen.
7   Repeat steps 6-2 to adjust other items.
After all adjustments are done, press MENU, and the menu 
disappears from the screen.
STANDBY/ON
MENUBACK
INPUT
OK
BACK
HIDE
LIGHT
LENS AP.C.M.D
  PC
HDMI 1
STAND BY
ASPECT
HDMI 2
ANAMO
COMP.
LENS.CONTROL
MENU
GAMMAP.FILE
COLORADJ. PIC.
      ON
FILM
NATURALSTAGE
3D
USER1 USER2
  THX
ANIME
CINEMAPICTURE MODE
INPUT
TEMP
COLOR
1
1 2,5
2,5
3,4
3,4
3
3
6
6
ExitMENU BACKBack
Select Operate
160H
HDMI-2
1080p60
10bitInput
Source
Deep Color 
Lamp Time
Information
：
：
：
：
ExitMENU BACKBack
Select Operate
160H
HDMI-2
1080p60
10bitInput
Source
Deep Color 
Lamp Time
Information
：
：
：
：
Example: When inputting 
PC signals
Example: Input of signals 
other than PC signals
COM
RS50RS5
0RS60
RS50RS50RS60
RS50RS50RS60     
						

							45
ENGLISH
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Menu item description
All numbers for the items within [  ]are default settings.
● It is possible to operate all items displayed in the menu display by pressing OK/BACK or the cursor (up, 
down, left, right arrows).
● Displayed items vary depending on the selected item in the menu and type of input signal or absence of 
any signal.
[1] Picture  Adjust
Picture Mode Please refer to the description of each mode, and then use the mode to b\
est suited for 
you. Moreover, it is possible to adjust the image quality by using a user 1, 2, and 3\
. 
 
Settings: Film, Cinema, Animation, Natural, Stage, 3D, THX, User 1, User 2, User 3.
  [Natural]
Film This quality setting is similar to the texture of the film setting. It is suitable for watching 
movies in general.
This image setting is based on the DCI standard and brings to life brigh\
tly colored 
pictures. Suitable for viewing action movies and brightly colored images\
.
DCI: Shorthand for Digital Cinema Initiatives.
Animation An image quality setting for watching animation movies and the like.
Natural It is an image quality setting with natural color/tone. Suitable for vie\
wing video material, 
such as dramas/serials.
Stage This image quality setting is suitable for watching of live events, e.g.\
 on a stage. 
3D This is an image quality setting for watching 3D movies. 
User 1
User 2
User 3  The users 1, 2, and 3 should adjust the image quality as desired in each\
 case. Data of the 
last adjustment is saved. 
THX 
RS50RS5 0RS60It is an image setting certified by the company THX. 
Color Profile It selects a color profile to suit the input source. Depending on the settings, the items that 
can be set in the "Picture Mode" vary. (See Table 1) 
The color profile is selected based on the video production. We recommend to match the 
color profile of the video you want to watch.
(*) If you select "Off", it is impossible to perform any picture adjust for other color temp.\
 
other than "Lamp power" and "Lens aperture" under "Advance", and also no\
t gamma or 
sharpness.
Setting: Film 1, Film 2, Cinema 1, Cinema 2, Standard, Anime 1, Anime 2, Video, Vivid, 
Adobe, Stage, 3D, Off. 
Depending on the picture mode, the default values will change. 
[See table 1]
Film 1 This is a profile that comes close to a color space that resembles using a Xenon lamp to 
transmit a film used for movies by the Eastman Kodak Company. 
Film 2 This is a profile that comes close to a color space that resembles using a Xenon lamp to 
transmit a film used for movies by the FUJIFILM Corporation.
Cinema 1 This is a profile that resembles the color space of the DCI standard.
Cinema 2 This is a profile that resembles the color space of HDTV.
Standard It is a profile with an especially rich representation of the film-specific colors.
HDTV: Shorthand for High Definition Television.
Anime 1 This is a profile suitable for CG-animations, which can be often found in Hollywood-
produced animated series.
It is intended for animations with multiple bright colors.
Anime 2 This is a profile suitable for animation cel-style animation series, which are common in 
Japan.
It is intended for animations with many dim colors.
V ideo This profile is suitable e.g. for TV / drama / sports. 
V ivid This is a profile with rich sense of color, which makes it suitable for games. 
Adobe This is the color profile for Adobe RGB. 
(*) Adobe, and the Adobe logo are registered trademarks or trademarks of Adobe 
Systems Incorporated in the United States and/or other countries.  
Stage This profile is suitable for live music, orchestra and opera concerts, theater
, etc.
3D This is the most suitable profile when using 3D-glasses. 
Of f It is a mode that does not adjust the color management.
Cinema
RS50RS5
0RS60
RS50RS50RS40 
 Operation    
						

							46
Operation
3
A dju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
P ic tu re  M ode
Film   Cinema  AnimeNatural  Stage  3D  THX User 1, 2
Color Profile Film 1 
  Cinema 1  Anime 1  Video    Stage 3D  THX  
Everything 
is displayed  except for 
Film 1 and  Film2.
Film 2
Cinema 2 Anime 2Vivid Standard Standard
Standard Standard Adobe Vivid  
Standard       
  This is the default value according to the picture mode.
[T
able 1]  The setting contents and default values
RS50RS50RS60of the color profiles for the picture mode
Color T emp. It is possible to set the color temp.
To "[1-1] Color Temp." of the submenu
Gamma It is possible to set the gamma curve. Please set to your preference.
Settings: Normal, A (3D), B (3D), Film 1, Film 2, Film 3 Film 4, A, B, C, D, Custom 1, 
Custom 2, Custom 3 
[Normal]
Normal Typically we recommend this setting.
A (3D)
B (3D)  A (3D), B (3D) can only be set, if the "Picture Mode" is "3D". 
This is the normal gamma curve for 3D.
A (3D) will be brighter.
Film 1, 2, 3, 4 can only be set if the "Picture Mode" is set to "Film" 
RS50RS5
0RS60
Film 1 This is a gamma curve   that approximates the characteristics of an Eastman Kodak 
Company film for movies.
Film 2 This is a gamma curve that approximate the gamma curve characteristics o\
f a 
cinematographic film made by the FUJIFILM Corporation.
Film 3 This is a gamma curve that is even more focused on tone for the gamma of\
 Film 1.
Film 4 This is a gamma curve that emphasizes more contrast for the gamma of Fil\
m 2.
A, B, C, D cannot be set if the "Picture Mode" is "3D".
A
B
C
D In regard to normal gamma, this is a gamma curve focused on tone.
This is a gamma curve for the film's unique S curve.
This is a gamma curve that – in regard to the gamma of B – emphasized even more the 
feeling of contrast.
For normal, this is a gamma curve where the intermediate gradations look\
 very bright.
Custom 1
Custom 2
Custom 3 Custom 1, 2, 3 cannot be set if the "Picture Mode" is "3D".
Under submenu "
[1-2-2] Custom Gamma ", it is possible to change the gamma curve and 
save it.
The initial value of Custom 1, 2, and 3 is the same as for "Normal".
Film T one You can reproduce the intensity of the exposure image.
(*) This function can be set if the "Picture Mode" is set to "Film".
White
Red Settings: (The more under-exposure, the darker) -16 to 16 (the more o\
ver-exposure, the 
brighter) 
[0]
Setting: (under-exposure to for red), -16 to 16  (over-exposure for r\
ed)  [0]
Green Settings: (under-exposure for green) -16 to 16 (over-exposure for gre\
en) 
[0]
Blue Settings: (under-exposure for blue) -16 to 16 (over-exposure for blue\
) 
[0]
Dark/Bright Level Compensating darkness / brightness of an area.
(*) It is possible to set it unless the "Picture Mode" is set to "Film\
". 
Dark Level Values: (makes dark areas darker) -7 to 7 (brightens dark areas) 
[0] 
Bright Level Settings: (darkens bright areas) -7 to 7 (makes bright areas brighter\
) 
[0] 
RS50RS50RS60
RS50RS50RS60     
						

							47
ENGLISH
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Contrast Adjusts the contrast of the video images.
Settings: (blackish) -50 50 (whitish)
Brightness You can adjust the brightness of the video image.
Settings: (dark) -50 to 50 (bright) 
Color Adjust the color intensity of the video images.
Settings: (dim), -50 to 50 (saturated) 
T int Adjusts the image tint of the video images.
Settings: (reddish) -50 to 50 (greenish)
Advanced Functions such as contour correction, custom gamma and color management \
can be set 
to sub-menu "[1-2] Advanced".
Reset Sets settings to default factory settings.
[1-1] Color T
emp.
Set the color temp. of the video images.
Please adjust to your preference.
(*) For this setting, the setting items can differ in accordance with the "Picture Mode". 
Adjustment is not possible when set to “THX".
Settings: (Preset value), Xenon1, Xenon2, Xenon3, Custom 1, Custom 2, \
Custom 3  [Preset value]
(Preset value) The color temp. can be adjusted within the range of 5500K to 9500K in steps of 500K. 
It is said that a value of 6500K produces a well balanced video image.
Settings: Between (reddish) 5500-9500 (bluish) in steps of 500K 
[6500] 
Xenon1
Xenon2
Xenon3 This reproduces the color temp. characteristics of a xenon lamp being us\
ed in cinemas.
A light source color that is emitted by a film projector.
A light source color emitted by a projector used for digital cinema.
A light source color that looks cooler than that of the Xenon2.
Of
fsetXenon 1, Xenon 2, Xenon 3 can each be adjusted based on the dark color o\
f the video 
images.
Red Settings: (Weak red) -50 to 50 (strong red) 
[0]
Green Setting: (Weak green), -50 to 50 (strong green) 
[0]
Blue Setting: (Weak blue) -50 to 50 (strong blue) 
[0]
Custom 1
Custom 2
Custom 3 You can adjust the color temp. and save each Custom 1, 2, and 3.Please sa\
ve your 
preferred adjustment values and enjoy it.
Gain It is possible to adjust the bright part of the video images for each co\
lor.
Red Settings: (Weak red) -50 to 50 (strong red) 
[0]
Green Setting: (Weak green) -255 to 0 (strong green) 
[0]
Blue Setting: (Weak blue) -255 to 0 (strong blue) 
[0]
    OffsetFor each color, the dark areas of the video images can be adjusted.
Red
Green
Blue Settings: (Weak red) -50 to 50 (strong red) 
[0]
Setting: (Weak green) -50 to 50 (strong green)  [0]
Setting: (Weak blue) -50 to 50 (strong blue)  [0] 
 Operation    
						

							48
Operation
3
A dju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
[1-2]  Advanced
Sharpness You can set the sharpness and detail enhance to "
[1-2-1] Sharpness" of the submenu
NR Reduces the noise of the video images. Please adjust to your preference.\
RNR Adjusts the intensity of random noise elimination of the image.
Values: (Low) 0 to16 (strong) 
[0] 
MNR Adjusts the intensity of mosquito noise elimination of the video images.\
(*) It is not possible to set it when the "Picture Mode" is set to "3D\
".
Moreover, it is not possible to set it when there is an input of HD input signal\
s.
Values: (Low) 0 to16 (strong) 
[0] 
BNR Reduces the block noise of the video images.
(*) ) It is not possible to set it when the "Picture Mode" is set to \
"3D"
Moreover, it is not possible to set it when there is an input of HD input signal\
s.
Settings: On, Off 
[Off]
Color Space  You can switch the color space display of the projector output.
Settings: Standard, Wide 1, Wide 2
Standard
Wide 1
Wide 2 Equivalent to the HDTV color space
Equivalent to the color space of the DCI standard
A
 color space that is broader than Wide1
Custom Gamma It is possible to set the gamma curve and save it. Please adjust to your\
 preference.
To "[1-2-2] Custom Gamma
" of the submenu 
Color Management It is possible to set the color of the screen to the preferred color and\
 save it.
To "[1-2-3] Color Management" of the submenu.
Clear Motion Drive It improves video images with fast movements to produce clear video imag\
es with little 
residual image retention.
For PC and 3D signals, the "Clear motion Drive” cannot be set.
Moreover, the images in some scenes may be distorted. In such a case, please sel\
ect 
"Off".
Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Film motion 
[Off]  
Of f Off
Mode 1 Black insertion weak
Mode 2 Black interpolation strong
Mode 3 Interpolation weak
Mode 4 Interpolation strong
Inverse  Telecine With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image 
footage is changed to a 24 frame display.
(*) 24p will not function.
CMD Demo It is possible to confirm the effect of the setting of Mode 3 and Mode 4 of the Clear motion 
drive. Upon pressing the button "OK", it will be displayed on all sides of a screen in the 
center split into two parts. Finally, it will turn to "Off”. It cannot be set for PC and 3D 
signals.
Settings: Left -> right -> top -> Bottom -> Off (changed with "OK" button) 
[Off]
Left  The left screen displays a demonstration of the Clear motion drive.
Right  The right screen displays a demonstration of the Clear motion drive.
Top The upper screen displays a demo of the Clear motion drive.
Bottom The screen below displays a demo of the Clear motion drive.
Off The Demo of the Clear motion drive is turned off.
Lens  Aperture Adjusts the amount with which the optical iris is squeezed. A setting of 0 means fully 
opened.
Settings: (Dark) -15 to 0 (bright) 
[0] 
RS50RS50RS60
RS50RS50RS40     
						

							49
ENGLISH
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Custom Gamma
Correction Value
White
Red
Green Blue
Reset1023
512
50100(%)Custom1
Custom2
Custom3
0
Picture Adjust
ExitMENUBACKBack
Select Operate
Normal
>
>
Gradation at the 
selected point.
Gamma curve
Gradation diagram corresponding
 to the gamma curve.
(*)
Lamp Power It is possible to change the brightness of the lamp.
(*) If continually used with "High", the lamp will become dark earlier\
.
(*) The more one lets the interior temperature of the device rise due to gen\
eration of heat, 
the less the level of tolerance against high temperatures.
(*) For about 60 seconds after the lamp is lit, the lamp cannot be swi\
tched off.
 Settings: Normal, High  
[Normal]
Normal Normally this setting is chosen.(160W drive)
High In a bright room, when the video is hard to see, this setting is chosen.\
(220W drive)
[1-2-1] Sharpness
Sharpness Emphasizes the outlines of video images. Please adjust to your preferenc\
e.
Values: 0 to 50 (clear)
Detail Enhance It makes minute details of the video images stand out. Please adjust to \
your preference.
Values: 0 to 50 (strong)
[1-2-2] Custom Gamma
Custom 1~3 [1] It is possible to select a gamma curve adjustment for Custom 1, 2, a\
nd 3 under the 
"Gamma" of the picture adjust and then save it.
Please adjust to your preference.
(*) Initial values of Custom 1, 2, and 3 are the same as for "Normal".\
(*) Please refer to the figure at the bottom of the menu in two frames for adjustment.
(*) It is recommended that you read "Gamma Curve" (page reference: 56\
) for hints about 
adjustment.
Correction V alueYou can choose to add the underlying gamma curve adjustment.
(*) Can choose any setting, as the default gamma curve will always app\
ear linear.
Settings: Normal, A, B, C, D 
(brightens in particular dark to intermediate parts) 1.8 to 2.6 (dark\
ens in particular dark to 
intermediate parts) in the range of values with increments of 0.1 
[Normal]
Gamma  Adjustment The gamma curve for "green" is being displayed as being representative. \
If "white", "red," 
"green" or "blue" are selected, the corresponding color curves are displ\
ayed.
Place the cursor on a gamma curve with 12 points with the buttons for le\
ft and right, and 
then use the buttons for up and down buttons to move those points up or \
down.
White Red, green and blue can be adjusted at the same time.
Red It is possible to adjust the gamma curve of red.
Green It is possible to adjust the gamma curve for green.
Blue It is possible to adjust the gamma curve for blue.
  Reset The same data as for the "Normal" mode are used.
(*) When you exit the adjustment menu of Custom Gamma, please save the\
 adjustment 
values. 
You can return to the original data, which should be saved. 
 Operation    
						

							50
Operation
3
A dju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
[1-2-3] Color Management 
Custom 1~3 Set the 7 color axis (red / orange / yellow / green / cyan / blue / mag\
enta) color as you 
like and save it then. For example you may want to change only the red c\
olor of roses. 
Please adjust to your preference. According to your adjustments, the input image in the 
background changes. It is possible to confirm the video image before adjustment by 
pressing the "HIDE" button of the remote control.
Pause It is possible to display the input video image of the background being \
adjusted as a still 
picture.
Settings: On, Off 
[Off]
On
Off Freezes the input video image.
Unfreezes the input video image.
Color Selection It is possible with the 7 colors of red, orange, yellow, green, cyan, blue and magenta to 
precisely adjust the hue, color saturation and brightness, and then save\
 it. Please adjust 
to your preference.
Axis Position Fine-tune the position of the central axis of the selected color further\
.
Settings: -30 to 30 
[0]
Hue Adjust the hue.
Settings: -30 to 30 
[0]
Saturation Adjust the color saturation.
Settings: (dim color), -30 to 30 (vivid colors)  [0]
Brightness Adjust the brightness.
Settings: (dark) -30 to 30 (bright colors)   [0]
[2] Input Signal
 
HDMI It is possible to set this if one selects the HDMI terminal to the subme\
nu  "[2-1] HDMI".
COMP . This can be set if one selects the COMP. terminal to the submenu "[2-2] COMP ."
PC  This can be set if one selects the PC terminal to the submenu  "[2-3] PC".
Picture Position Please adjust if the edges of the picture are partially missing due to t\
he timing of 
horizontal and vertical synchronization signals. The value of the picture position depends 
on the input signal.
(*) Depending on the input signal, it may be the case that not everyth\
ing of the video 
image is displayed.
(*) When there is a 3D input signal, adjustment is not possible.
Horiz.
V ert. This aligns the horizontal direction of the image position.
This aligns the vertical positions of the image.
Aspect (V ideo) (*) It is displayed when there is a video signal input.
(*) If set to3D, ratio is fixed to 16:9.
Settings: 4:3, 16:9, Zoom 
[16:9]
4:3 Sets the screen size of the image to 4:3. For HD signals, left and right\
 sides are reduced.
16:9 Sets the screen size of the video image screen to 16:9. For SD signals l\
eft and right sides 
are expanded.
Zoom Zooms the video images.  (*) For HD signals, this cannot be selected.
Aspect (PC) Sets the video image screen size when there is a PC video signal input.
(*) Is displayed when there is a PC signal input.
Settings: Auto, 1:1, Full 
[Auto]
Auto Positions the video image screen in the center of the display range, to fill the screen.
Depending on the size of the video screen, left and right black borders \
will be drawn.
Just The video image screen size is displayed with the size of the input imag\
e.
Depending on the input video image, the screen will become smaller or pa\
rt of the input 
image off the screen is cut off.
Full It does not keep the aspect ratio of the video image screen and fills the entire screen.
RS50RS50RS60
RS50RS50RS60