JVC Projector Dla Rs60u3d Instructions Manual

							31
ENGLISH
About the connection (Continued)
Connection of the power cord (provided)
Once you have connected the equipment, connect the projector power cord.
1        HDMI         2RS-232-C
3D CR/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUTOK
Power Cord
(Supplied)
1
2
1   Connect the power cord supplied with the 
unit power input terminal
2 Connect to the power outlet
●  As the amount of electrical energy for this unit is large, please connect it directly into 
the wall outlet.
● When you are not using the equipment, please unplug the power cord.
● Connect it only with the provided power cord.
● Do not use voltage other than the indicated power voltage.
● Do not damage, break or modify the power cord. Moreover , the power cord will be 
damaged if you place it under heavy objects, heat or pull it.
●  Do not unplug with wet hands.
Be carful to avoid fire and electric shocks
CAUTION 
Preparation    
						

							32
Operation
3
Basic Operation
Basic operation procedures
WARNINGLAMPSTANDBY/ON
Once you have finished the basic setup, the unit can normally be 
used just with the following operations.
1
2
3
T urn on power source
ON
STANDBY/ON
Light on (Green)
● You  can  also  press  the   button  on  the  unit  to  turn 
on the power . (Reference page: 15)
● The lens cover will be opened.
Choose the projected image
1 Select input mode
● 
Y ou can also select the input mode by pressing the INPU T 
button on the unit. (Reference page: 15)
HDMI 1
HDMI 2COMP.PC
2 Play back the selected device
Adjust the zoom (screen size)
BACK Back Operate Select Exit
 MENU  
Zoom  
Lens Control
 LENS
Adjust accordingly 
by pressing the up/ down buttons
4Adjust the focus (focal point)
Adjust accordingly by pressing the 
up/down buttonsBACK Back Operate  Select Exit MENU 
Focus 
Lens Control
 LENS
BACK
HIDE
LIGHT
LENS AP.C.M.D
  PC
HDMI 1
STAND BY
ASPECT
HDMI 2
ANAMO
COMP.
LENS.CONTROL
MENU
GAMMAP.FILE
COLORADJ. PIC.
      ON
FILM
NATURALSTAGE
3D
USER1 USER2
  THX
ANIME
CINEMAPICTURE MODE
INPUT
TEMP
COLOR
6
4
2
5
3
1
RS50RS5
0RS60       
           
						

							33
ENGLISH
5Adjust the shift (image position)
Adjust accordingly by pressing the 
up/down buttonsBACK Back Operate  Select 
Shift 
Lens Control
● 
After  adjusting  the  image  position,  it  may  be  necessary  to 
select  “Pixel Adjust”  from  the  Settings  menu  “Installation”. 
 
(Reference page:53)
●  Every  time  the LENS  button  is  pressed,  the  adjustment 
item will be switched among “Focus”, “Zoom” and “Shift”.
     
   OK It can also be switched with the button.
)RFXV =RRP
6KLIWLENS 

STAND BY
STAND BY
STAND BY/ON
ST AND BY/ONBlinking (Red Lamp)
Light on (Red Lamp)
While a confirmation screen is displayed
Cool Down mode
6Turn off power source
● When power off, the lens cover will be closed.
● The  power  cannot  be  turned  off  within  approximately  90 
seconds  after  it  has  been  turned  on.  Start  operation  only 
after 90 seconds time.
● You  can  also  press  the   button  on  the  unit  to  turn  off 
the power. ( Reference page: 15 )
● 
Pull out the power plug when the unit will not be used for a     
prolonged time.
About Cool Down 
mode 
MEMO
● T he C ool  D ow n m ode is  a  
f u nctio n to  c o ol  d ow n th e la m p 
f o r a ppro xim ate ly  6 0 s e co nds 
a fte r p ro je ctio n is  c o m ple te . 
T his  fu nctio n p re ve nts  th e 
i n te rn al  p arts  o f th e u nit  fr o m  
d efo rm atio n o r d am age d ue to  
o ve rh eatin g o f th e la m p. It a ls o  
p re ve nts  la m p b lo w out a nd 
p re m atu re  s h orte nin g o f la m p 
l if e .
● D urin g C ool  D ow n m ode, th e 
[ S TA N DBY/O N] in dic a to r b lin ks  
i n  r e d. 
●  A fte r th e C ool  D ow n m ode is  
c o m ple
t e , th e u nit  a uto m atic a lly  
r e tu rn s to  s ta ndby m ode. 
●  D o n ot p ull  o ut th e p ow er p lu g 
d urin g C ool  D ow n m ode. T his  
m ay s h orte n th e la m p lif e  a nd 
c a use  a  m alf u nctio n.
LENS 
 Operation      
						

							34
Operation
3
Basic Operation (continued)
Frequently used useful functions
    Setting the Screen Size
    Masking the Surrounding  Area of an Image
     Temporary turning-of f of the video
     Adjustment of the keystone correction
The projected image can be set to a most appropriate screen 
size (aspect ratio).
● The screen size can also be set from  “
Aspect(V ideo)”
 of the 
setting menu. (Reference page: 50)
●  When PC signals are input, the  “
Aspect(Computer) ”
 setting will be 
available instead.  (Reference page: 50)
■
  I n put Im ag e a n d P ro je cte d  Im ag e b y D if fe re n t S cre en 
Size 
Screen Size
4:3 16:9Zoom
Input Image
　　
SDTV(4:3) Aspect Ratio:Same
Most appropriate 
screen size Aspect Ratio: 
Landscape
Image is stretched
horizontallyAspect Ratio:Same
Top and bottom of
the image are 
missing
SDTV(4:3)
      Image recorded in 
     landscape (black 
     bands on top and 
     bottom) of DVD 
     softwareAspect Ratio:Same 
Small image is 
projected Aspect Ratio: 
Landscape 
Image is stretched 
horizontally Aspect Ratio:Same 
Most appropriate 
screen size
● 
Depending on the input image, selecting  “
4:3 ”
 may result in a 
vertically stretched image, while selecting  “
16:9 ”
 provides you 
with the most appropriate screen size.
●  When there is 3D signal input, the ratio is fixed to  “
16:9 ”
.
ASPECT 4:3     16:9      Zoom 

Y
ou can change the screen size of the projected image or 
hide the surrounding area of an image for which quality at the 
outer area has deteriorated.
A Setting the Screen Size
BACK
HIDE
LIGHT
LENS AP.C.M.D
  PC
HDMI 1
STAND BY
ASPECT
HDMI 2
ANAMO
COMP.
LENS.CONTROL
MENU
GAMMAP.FILE
COLORADJ. PIC.
      ON
FILM
NATURALSTAGE
3D
USER1 USER2
  THX
ANIME
CINEMAPICTURE MODE
INPUT
TEMP
COLOR
A
A
B
C
D
RS50RS5
0RS60     
						

							35
ENGLISH
MEMO
● M a s k i n g   i s   a v a i l a b l e   o n l y 
when  high definition  images 
are input.
2Mask the image
②
  Confirm
MENU
Picture Adjust
ResetAdvancedExitMENU BACKBack
Select Operate
Color Temp.
Gamma
Film Tone
ContrastBrightness
Color
Tint00
00
Color ProfilePicture ModeFilm
Film1 
Xenon1Film1
 1  Display the setting menu
 
2 Select  “
Input Signal ”
  “
Mask ”
①
Select
②ConfirmExitMENU BACKBack
Select Operate
Aspect (Video)
Progressive
 HDMI
COMP.
Auto
PC　
Picture Position
16:9OffMask2.5%
5%
Off
 Custom
Input Signal
3  Set a mask value
① Select
ExitMENU BACKBack
Select Operate
Aspect (Video)
Progressive
 HDMI
COMP.
Auto
PC　
Picture Position
16:9
5%
5%
Mask2.5%
5%
Off
 Custom
Input Signal
Example: 
When the  “
Mask ”
 value is 
changed from  “
Of f”
 
“ 5% ”3T
o end 
MENU
Images for which quality at the outer area has deteriorated 
can be projected by masking (hiding) the surrounding area of 
the projected image.
1
Image  for which  qual ity at the  outer 
area has deteriorated.  
Project the image
 B Masking the Surrounding  Area of an Image
BACK
HIDE
LIGHT
LENS AP.C.M.D
  PC
HDMI 1
STAND BY
ASPECT
HDMI 2
ANAMO
COMP.
LENS.CONTROL
MENU
GAMMAP.FILE
COLORADJ. PIC.
      ON
FILM
NATURALSTAGE
3D
USER1 USER2
  THX
ANIME
CINEMAPICTURE MODE
INPUT
TEMP
COLOR
B
RS50RS5
0RS60 
 Operation     
       
						

							36
Operation
3
MENU
Picture Adjust
ResetAdvancedExitMENU BACKBack
Select Operate
Color Temp.
Gamma
Film Tone
ContrastBrightness
Color
Tint00
00
Color ProfilePicture ModeFilm
Film1 
Xenon1Film1
 1  Display the setting menu
 
3 Adjusts keystone correction
If one presses the cursor (vertical and horizontal arrows) in the 
keystone correction mode, the keystone distortion can be adjusted.
 4 Exit 
Basic Operation (continued)
Y ou can hide the image temporarily .
HIDE
Green light blinks 
when the image is  hidden.
● P re ss th e  HIDEb utto n a gain  to  d is p la y im age. 
●  The power cannot be turned off when the  image is temporarily 
hidden.
 D 
Adjustment of the keystone correction
 C T emporary turning-off of the video
In regards to the projection plane, any occurring keystone distortion 
is adjusted in case the installation location is inclined.
 2 Select  “
Installation ”
  “
Keystone ”
①
  Selec
② 
ConfirmExitMENU BACKBack
Select Operate
Pixel Adjust　
Installation
Lens Control
Anamorphic
Screen Adjust
Black Level
Installation StyleFront
OffKeystone
BACK
HIDE
LIGHT
LENS AP.C.M.D
  PC
HDMI 1
STAND BY
ASPECT
HDMI 2
ANAMO
COMP.
LENS.CONTROL
MENU
GAMMAP.FILE
COLORADJ. PIC.
      ON
FILM
NATURALSTAGE
3D
USER1 USER2
  THX
ANIME
CINEMAPICTURE MODE
INPUT
TEMP
COLOR
C
D
Adjust horizontal distortion with the 
cursors for left and right. Adjust vertical 
distortion with 
the cursors for 
up and down.
● 
W hen th ere  is  a  3 D  in put 
s ig nal,  a dju stm ent is  n ot 
p ossib le . M ore ove r, e ve n if  
t h e k e ysto ne c o rre ctio n is  
a dju ste d, k e ysto ne c o rre ctio n 
i s  r e m ove d w hen th ere  is  a  3 D  
i n put s ig nal.
MENU
RS50RS5 0RS60     
   
   
    
						

							37
ENGLISH
Adju stm en ts  a n d s ettin gs in  t h e m en u
The Menu of this unit is organized as follows.  As this is only a brief guideline, items, which might not be 
displayed due to certain settings, are still displayed in the illustration. Moreover , in regard to 
COM, it shows 
countermeasures for all kinds of devices, but there the values for setting and adjustment might be dif ferent. 
See  “
Description of menu items ”
 (Reference: Since 45 and following) for details. It can be moved to 
subscreens used for adjustment, even for items that do not feature submenus.
Structure of the menu hierarchy (summary)
T o  “
[2] Layers and 
organization of the input  signal submenu ”
  
T
o  “
[1] Layers and 
organization of the picture  quality submenu ”
Picture Adjust
ResetAdvanced
ExitMENU BACKBack
Select Operate
Color Temp.
Gamma
Film Tone
ContrastBrightness
Color
Tint
00
00
Color Profile
Picture ModeFilm
Film1 
  Xenon1Film1
Picture Adjust
Reset
ExitMENU BACKBack
Select Operate
Color Temp.
Gamma
Advanced
ContrastBrightness
ColorTint00
00
Picture ModeNatural
　6500KNormal
ExitMENU BACKBack
Select Operate
Aspect(Video)
Progressive
 HDMI
COMP.
Mask
Auto
PC　
Picture Position
16:9 Off
Input Signal
ExitMENU BACKBack
Select Operate
Aspect(Video)
Progressive
 HDMI
COMP.
Mask
Auto
Picture Position
16:9 Off
Input Signal
(*)   
Apart from “Film”, 
“Brightness/darkness 
correction” is displayed in 
the “Picture Mode”. (*)  
When there is a PC 
signal input, “Aspect 
(PC)” is displayed.
(*)
(*)
Continue to 
the next
[2]  
Input Signal
[1]  
Picture  Adjust
(*)  When there is a PC signal 
input, “Aspect (PC)” is 
displayed.
(*)
RS50RS5
0RS60RS50RS50RS60
RS50RS50RS40RS50RS50RS40 
 Operation    
						

							38
Operation
3
A dju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
ExitMENU BACKBack
Select Operate
Pixel Adjust　
Installation
Lens Control
KeystoneAnamorphic
Screen Adjust
Black Level
Installation StyleFront
Off
ExitMENU BACKBack
Select Operate
Display Setup
Back Color
Menu DisplayMenu Position
On
Line Display５sec
Source DisplayOn
LogoOn
LanguageEnglish Black
[4]  
Display Setup
[3]   Installation
T o  “
[3] Layers and 
organization of the 
installation submenu ”
    Continue 
to the next
Continued from 
the previous page
COMCOM     
						

							39
ENGLISH
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
ExitMENU BACKBack
Select Operate
Trigger
Off Timer
Communication Terminal
Network
Lamp Reset High Altitude Mode
LAN
Off
Off
Off
Function
ExitMENU BACKBack
Select Operate
Trigger
Off Timer
Lamp Reset High Altitude ModeOff
Off
Off
Function
ExitMENU BACKBack
Select Operate
160H
HDMI-2
1080p60
10bitInput
Source
Deep Color 
Lamp Time
Information
：
：
：
：
ExitMENU BACKBack
Select Operate
Lamp Time Deep Color 160H
PC
1920X1080
Information
Resolution 　　
67.50kHzH Frequency60.0HzV Frequency　  　　　　　 Input
：
：
：
：
：
：
8bit
To  “
[5] Layers and 
organization of the function 
submenu ”
  [6]  
Information
[5]   Function
For PC signal input
COM
Continued 
from the 
previous  page
RS50RS5 0RS60
RS50RS50RS60RS50RS50RS40 
 Operation    
						

							40
Operation
3
[1] Layers and organization of the picture adjust submenu
A dju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
>Color Temp.
Gain Red
Gain Green
Gain Blue
Offset Red
Offset Green
Offset Blue
Preset
Custom1
Custom2
Custom3
Picture Adjust
Xenon1
ExitMENUBACKBackSelect Operate
Reset
000000
5500K
6000K
6500K
7000K
7500K
8000K
8500K
9000K
9500K
Xenon1
Xenon2
Xenon3
>Color Temp.
Gain Red
Gain Green Gain Blue
Offset Red
Offset Green Offset Blue
Preset
Custom1
Custom2
Custom3
Picture Adjust
6500K
ExitMENUBACKBackSelect Operate
Reset
000000
6500K5500K
6000K
7000K
7500K
8000K
8500K
9000K
9500K
High Brightness
6500K
Picture Adjust
ResetAdvanced
ExitMENU BACKBack
Select Operate
Color Temp.
Gamma
Film Tone
ContrastBrightness
Color
Tint00
00
Color ProfilePicture ModeFilm
Film1 
Xenon1Film1
Picture Adjust
Reset
ExitMENU BACKBack
Select Operate
Color Temp.
Gamma
Advanced
ContrastBrightness
ColorTint00
00
Picture ModeNatural
　6500KNormal
Picture Adjust
ExitMENU BACKBack
Select Operate
>Advanced
0Lens ApertureCMD DemoClear Motion Drive Color Management Custom Gamma
NR
Lamp Power
Sharpness
OffOff
Normal
Picture Adjust
ExitMENU BACKBack
Select Operate
>Advanced
0Lens ApertureCMD DemoClear Motion Drive Custom Gamma Color Space
NR
Lamp Power
Sharpness
Off
Standard
Normal
ExitMENU BACKBack
Select Operate
0
>
>
25
Detail Enhance
Sharpness
Picture Adjust
Sharpness
Color Management
 
Color SelectionAxis Position
Hue
Saturation Brightness
Off
Custom1
Custom2
Custom3
Picture Adjust
ExitMENUBACKBackSelect Operate
0000
PauseOff
Reset
Red
>
>
[1]  
Picture  Adjust
[1-2]  
Advanced
[1-2-3]  Color Management
[1-2-1] Sharpness
[1-1]  
Color temp.
[1-1]
[1-1] [1-2]
[1-2]
[1-2-1]
[1-2-1] [1-2-2]
[1-2-2] [1-2-3]
COM
Custom GammaCorrection ValueWhite
Red
Green Blue
Reset1023
512
50100(%)Custom1
Custom2
Custom3
0
Picture Adjust
ExitMENUBACKBackSelect Operate
Normal>
>
[1-2-2]  
Custom Gamma
COM
RS50RS50RS60RS50RS50RS60
RS50RS50RS60
RS50RS50RS60
RS50RS50RS40RS50RS50RS40
RS50RS50RS40