GE F650 Manual
Have a look at the manual GE F650 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 GE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 2: PRODUCT DESCRIPTION2.5 TECHNICAL SPECIFICATIONS GEK-113000-AFF650 DIGITAL BAY CONTROLLER 2-21 2.5.4 User-programmable PLC LOGIC Programming language: ......................................................The logical configuration is performed using graphical functions based on the IEC 61131-3 st andard. Lines of code*:........................................................................... 640 lines of code or 15360 bytes, whichever is greater (for versions < 7.00) 1000 total equations or 15360 bytes, whichever is greater (for versions >= 7.00) (*) Note: Reserved Modbus memory space of PLC equations in text format is up to 15360 bytes. This space is shared with informat ion conf igured in Enervista at Setpoint > Relay Conf iguration . According to this, the number of PLC equations can be limited by values conf igured on that section. Supported operations: .......................................................... NOT, XOR, OR (2 to 8 inputs), AND (2 to 8 inputs), NOR (2 to 8 inputs), NAND (2 to 8 inputs), Latch (Reset Dominant), Edge Detectors, T imers. 2 inputs default gates, from 3 to 8 inputs provided in library format . Starting in version 7.20, analog operators are also available. Libraries:....................................................................................... Logical gates fully programmable by user. Used to create user-programmable logic to be d istributed as a single object . Inputs:............................................................................................ any logical variable, contact or virtual input Number of T imers: .................................................................. 8 maximum in each logic scheme (provided in library format) FLEXCURVES Number: .......................................................................................4 (A through D) Reset Points: ............................................................................... 40 (0 through 1 of pickup) Operate Point: ........................................................................... 80 (0 through 20 of pickup) T ime Delay:................................................................................. 0 to 65535 ms in steps of 1 ms Saturation Level: ...................................................................... 20 x the pickup level USER-PROGRAMMABLE LEDS Number: .......................................................................................15 conf igurable LEDs plus the Ready non-conf igurable LED Programmability: ..................................................................... any logical variable, contact , or virtual input Reset Mode: ................................................................................ self-reset or latched. The f irst 5 LEDs (red) are latched by hardware, usually configured for trip signals. The following 10 LEDs (yellow and green) are self-reset but can be latched through PLC conf iguration. Reset Signal: ............................................................................... The LEDs can be reset by hardware, pressing the front “esc” key for more than 3 second s or using the LED reset signal through PLC conf iguration. USER-DEFINABLE DISPLAYS Number of Conf igurable Displays: .................................. 1: one line diagram fully conf igurable. In graphical displays only Number of Fixed Displays: .................................................. 6: Metering (selectable between Primary and Secondary values), Snapshot Events (all and new ), Alarms, Inputs and Outputs screen with test functionality for inputs and outputs. (In graphical displays only.) Number of Selectable Displays: ........................................ 2: Logotype, Metering, or both in scrolling mode can be selected as the default screen in t ext display for all models (basic and mimic). The metering screen contains current and voltages for phases and ground in primary or secondary values. USER-PROGRAMMABLE FRONT KEYS Number of Conf igurable Keys:.......................................... 5 Operation: ................................................................................... Drive PLC operands
2-22F650 DIGITAL BAY CONTROLLER GEK-113000-AF 2.5 TECHNICAL SPECIFICATIONS CHAPTER 2: PRODUCT DESCRIPTION 2.5.5 Metering CURRENT Accuracy (at nominal frequency): .................................... ±0.5% of the reading ± 10 mA from 0.05 to 10.00 A (for phases and ground) ±1.5% of the reading ± 1 mA from 0.005 to 5 A (for sensitive ground) ±1.5% of the reading for higher values % of Load-to-trip Accuracy: ................................................ ±0.5% of full-scale VOLTAGE Accuracy: .....................................................................................±1% of reading from 10 to 208 V REAL POWER (WATTS) Accuracy: .....................................................................................±2.0% of the reading at -0.8 ≤ PF ≤ -1.0 and 0.8 < PF ≤ 1.0 REACTIVE POWER (VARS) Accuracy: ..................................................................................... ±2.0% of the reading at -0.2 ≤ PF ≤ 0.2 APPARENT POWER (VA) Accuracy: ..................................................................................... ±2.0% of the reading WATT-HOURS (POSITIVE AND NEGATIVE) Accuracy: .....................................................................................±2.0% of the reading Range: ............................................................................................ -2147483 to +2147483 MWh Parameters:................................................................................. 3-phase only Update Rate:............................................................................... 100 ms WAR-HOURS (POSITIVE AND NEGATIVE) Accuracy: .....................................................................................±2.0% of the reading Range: ............................................................................................ -2147483 to +2147483 MVArh Parameters:................................................................................. 3-phase only Update Rate:............................................................................... 100 ms FREQUENCY Accuracy: .....................................................................................+/- 0.03Hz From 30 to 80 Hz Note: Voltage input must be above 10 V to start measuring frequency ANGLE Accuracy: .....................................................................................±3º 2.5.6 Inputs AC CURRENT INPUTS CT Ratio: ........................................................................................1.0 to 6000.0 in steps of 0.1 Rated Currents:.......................................................................... Appropriate for 1 or 5 A. F650 has universal range for CT (valid for 1 or 5 A to only one te rminal). Relay Burden: ............................................................................. < 8 mVA at 1 A < 200 mVA at 5 A VA Input Impedance: ..................................................................... < 8 mOhm Current Withstand: .................................................................. Continuous at 20 A 1 s at 500 A for phases and ground 1 s at 50 A for sensitive ground
CHAPTER 2: PRODUCT DESCRIPTION2.5 TECHNICAL SPECIFICATIONS GEK-113000-AFF650 DIGITAL BAY CONTROLLER 2-23 AC VOLTAGE INPUTS VT Ratio: .......................................................................................1.0 to 6000.0 in steps of 0.1 Rated Voltage: ........................................................................... 275 Vac Metering Range: ....................................................................... From 2 to 275 Vac Relay Burden: ............................................................................ 0.05 VA at 120 Vac (50 or 60 Hz) Voltage Withstand:.................................................................. Continuous at 275 V to neutral 1 min/hr at 420 to neutral VAC inputs do not need varistors, as the impulse test is applied to 100% of the transformers CONTACT INPUTS Input Activation Threshold: .................................................10 to 230 Vdc in steps of 1 V (selectable by setting) Impedance:................................................................................. > 100 kΩ Maximum Error: ........................................................................ ±10% setti ng or ± 5 V Load for Voltage Supervision Inputs:.............................. 2 mA + V/100 kΩ Voltage Threshold for Voltage Supervision Inputs: .. < 10 V (fixed) Debounce T ime: ....................................................................... 1 to 50 ms in steps of 1 ms Recognition T ime: .................................................................... 2 ms (typical) T iming Resolution:................................................................... 1 ms For Activation Voltage Threshold and Debounce T ime there is a single setting for all inputs in the same group (all inputs shari ng the sa me common). Input Type and Delay Input Time are not grouped; there is a different setting for each input. Input Type: .................................................................................. positive-edge/negative-edge/positive/negative Delay Input T ime: .................................................................... 0 to 60000 ms in steps of 1 ms (input signal time delay) REMOTE INPUTS (IEC61850 GSSE/GOOSE) Number of Input Devices: ....................................................32, conf igured from 64 incoming bit pairs Number f Remote Devices: ................................................. 16 (24 for relay version 7.00 and above) Default States on Loss of Comms: ................................... On, Off, Latest/on, Latest/off ANALOG INPUTS Input Impedance: ....................................................................116Ω Current Input (mADC): ............................................................ 0 to -1; 0 to +1; -1 to +1; 0 to 5; 0 to 10; 0 to 20; 4 to 20 (programmable) Conversion Range: .................................................................. -1 to +20 mA Accuracy:..................................................................................... ±0.2% of full scale Type: .............................................................................................. passive IRIG-B INPUT Amplitude Modulation: ..........................................................DC SHIFT = demodulated input (no carrier) Input Voltage: ............................................................................ TTL Input Burden: ............................................................................. 1.5 mA Input Impedance: .................................................................... 3.3 kΩ Minimum Input Voltage: ....................................................... 2.4 V Maximum Input Voltage: ...................................................... ± 24 V Formats: ....................................................................................... B000 (*) B001, B002 and B003 (* (*) Signal combinations recognized in accordance with IRIG Standard 200-95 Isolation:....................................................................................... 2 kV
2-24F650 DIGITAL BAY CONTROLLER GEK-113000-AF
2.5 TECHNICAL SPECIFICATIONS CHAPTER 2: PRODUCT DESCRIPTION
2.5.7 Real time clock
Accuracy: ..................................................................................... typical ±20 ppm
Backup Energy: ......................................................................... more than 1 week
Note : For r
elay versions before 7.00, when the relay date and time is changed using any documented methods (Modbus, IRIG-B, SNTP,
Front Panel...) the relay acknowledges and updates the time instantly but it takes nearly 3 minutes for the new time to be perm anently
stored in the Real T ime Clock’s NVRAM.
2.5.8 Outputs
OUTPUTS
Single Contact Carry continuous: ..................................... 16 A
Make and Carry for 1 s: ......................................................... 60 A
Break at L/R of 40 ms: ............................................................ 0.3 A DC max. at 125 Vdc
0.25 A DC max. at 250 Vdc
Operate T ime: ............................................................................ < 8 ms
Contact Material: ...................................................................... silver alloy
Output Logic Type, Output Type and Pulse Output Time are selectable by setting for each output
Output Logic Type:...................................................................positive/negative
Output Type: ............................................................................... normal/pulse/latch (selectable by setting for each output)
Pulse Output T ime: .................................................................. 0 to 60000 ms in steps of 1 ms (applicable only to signals sent as pulse type)
Separate operate and reset signals can be configured by any digital signal programmable through the PLC
Contact Outputs (F31-F33, F34-F36) for board type
2 (supervision) in slot F: .................................................... The current seal-in circuit is used for verifying the current condition in a circuit during
the tim
e that the tripping contact remains closed. If the current in the tripping circuit is
maintained over 500 mA, the function is sealed independently of the status of the
function that caused the trip.
REMOTE OUTPUTS (IEC61850 GSSE/GOOSE)
Standard Output Points: ........................................................ 32
User Output Points:.................................................................. 32
2.5.9 Control power supply
LOW RANGE (LO) ALL RANGES
Nominal DC Voltage:24 to 48 VPower Consumption:Typical =25 VA, Maximum =45 VA
Min/Max DC Voltage 19.2 / 57.6 VDisplay backlight auto power-off mode after 15 minutes without touching
any key
, in order to ensure long life and
minimum consumption
Note:
Low range is DC only
Voltage Loss hold-up time:(*) 24 Vdc 30 ms
48 Vdc 100 ms
(*) These figures have been calculated for models wit
h the following characteristic:
- IEC Symbols Graphic display
- Rear Ethernet Communication Board 2: PRP, 1588, 10/100 Base TX+ Redundant 100 Base FX
- F and G I/O Board:
Slot F: 8 Digital Inputs + 8 Output
s + 2 Trip / Close circuit supervision circuits
Slot G: 16 Digital Inputs + 8 Outputs
HIGH RANGE (HI) INTERNAL FUSE
Nominal DC Voltage:110 to 250 VV:250 VAC
Min/Max DC Voltage 88 / 300 VI:2.5A
Nominal AC Voltage: 120 to 230 VSize:5 x 20 mm
Min/Max AC Voltage: 102 / 250 VTy p e :Quick acting (F)
Voltage Loss Hold-up Time: 200 ms typical
100 ms worst case UL listed miniature Fuse
CHAPTER 2: PRODUCT DESCRIPTION2.5 TECHNICAL SPECIFICATIONS GEK-113000-AFF650 DIGITAL BAY CONTROLLER 2-25 2.5.10 Communications FRONT PORT: Front port:COM2 Type: RS232/USB Baud Rate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200 baud Default Baud Rate: 19200 baud Protocols: ModBus ® RTU/DNP 3.0 Typical Distance: 3 m Isolation: 2 kV ASYNCHRONOUS REAR PORTS: None or two rear ports (depending on model):COM1, COM2 (rear COM2 multiplexed with front port) Type (depending on model): Model F None Model A Redundant RS485 Model X Redundant RS485 + fiber CAN for inputs/outputs module Model P Redundant 1mm-plastic F.O. Model Y Redundant 1mm-plastic F.O. + fiber CAN for inputs/outputs module Model G Redundant multimode glass F.O. Model Z Redundant multimode glass F.O. + fiber CAN for inputs/outputs module Model C Cable CAN port for I/O module Model M Cable CAN port for I/O module (cable) + RS485 (ModBus RTU) Optic Features for ST Connector Devices: Wave length: 1300nm Fiber type: multimode 62.5/125 μm or 50 /125 μm Baud Rate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200 baud Default Baud Rate: 19200 baud Protocols: ModBus ® RTU/DNP 3.0/IEC103 Typical Distance: 1200 m for cooper cable, 1000 m for glass fiber and 50 m for plastic fiber Isolation: 2 kV CAN PORT: Rear Port:CAN port in models C, M, X, Y, Z for asynchronous rear ports Type: Multimode glass F.O. port with ST connectors Fiber Wavelength: 820 nm Fiber Type: multimode 62.5/125 μm or 50/125 μm Maximum Recommended Length: 300 m for cooper cable and glass fiber Isolation: 2 kV ETHERNET PORT: Rear port: For models B, C, D, E:ETH_1/ ETH_2 For models G, H, J, K, L, M: ETH_E/ ETH_A/ ETH_B Type (depending on model): Model B: 10/100BaseTX self-negotiable Model C: 10/100BaseTX + 100Base FX Model D: 10/100BaseTX + redundant 100BaseFX (Physical media redundancy) Model E: Redundant 10/100BaseTX self-negotiable ports Model G: 1588, 10/100 Base TX* + 100 Base TX Model H: 1588, 10/100 Base TX* + 100 Base FX Model J: PRP, 1588, 10/100 Base TX* + Redundant 100 Base FX Model K: PRP, HSR, RSTP, 1588, 10/100 Base TX* + Redundant 100 Base FX Model L: PRP, 1588, 10/100 Base TX* + Redundant 100 Base TX Model M: PRP, HSR, RSTP, 1588, 10/100 Base TX* + Redundant 100 Base TX (*) Note: This Ethernet port (ETH_E) is intended o nly for maintenance purposes.
2-26F650 DIGITAL BAY CONTROLLER GEK-113000-AF 2.5 TECHNICAL SPECIFICATIONS CHAPTER 2: PRODUCT DESCRIPTION 10/100BaseTX: RJ45 connector 100BaseFX: ST connectors Wavelength: 1300 nm Fiber Type: multimode 62.5/125 μm or 50/125 μm Protocols: ModBus® TCP/IP DNP over TCP/IP and UDP/IP IEC 61850 http, ftp, tftp (allow the use of a standard Internet browser) Typical Distance: 1000 m for glass fiber and 150 m for RJ45 cable Response Time to ModBus Commands: 10 ms typical Isolation: 2 kV In Models C and D, the 10/100BaseTX port is selected by an internal switch (see 3.3.3) Two witness LEDs for transmiss ion an d reception are included SIMPLE NETWORK TIME PROTOCOL (SNTP) Clock Synchronization error:
CHAPTER 2: PRODUCT DESCRIPTION2.5 TECHNICAL SPECIFICATIONS GEK-113000-AFF650 DIGITAL BAY CONTROLLER 2-27 2.5.11 Optical Wave length: 1300 nm Connector types: ST p ackage style Fiber type: multimo de 62.5/125 μm or 50/125 μ m Notes: 1. These optical power values are measured with the following conditions: The Beginning of Live (BOL) to the End of Life (EOL) op tical power degradation is typically 1.5 dB per industry convention for long wavelength LEDs. The actual degradatio n observed in Agilent’s 1300nm LED products is
2-28F650 DIGITAL BAY CONTROLLER GEK-113000-AF 2.5 TECHNICAL SPECIFICATIONS CHAPTER 2: PRODUCT DESCRIPTION 2.5.12 Environmental Operating Temperature:........................................................ - 10°C to + 60° C Storage Temperature: ............................................................ - 40°C t o + 85° C Humidity (non-condensing):................................................ 95% Altitude: ......................................................................................... up to 2000 m Class of Equipment:................................................................. I Equipment Mobility: ................................................................ fixed Overvoltage Category:........................................................... III Pollution Degree:....................................................................... 2 2.5.13 Packaging and weight Net Weight:..................................................................................5 kg Packaged Weight: .................................................................... 6 kg Package Dimensions: ............................................................. 30 x 40 x 40 cm (D x W x H) 2.5.14 Type tests Type test report available upon request. F650 has been designed to comply with the highest existing requirements. More specifically, UNIPEDE recommendations for high voltage substations are followed, even if for most applications such high classes are not required. The relay complies with ANSI C37.90 standards, and has be en designed to comply with international standards. CATEGORYSTANDARDCLASSTEST SAFETY Dielectric voltage withstandIEC60255-272 KV / 2.3 KV Impulse voltage withstand IEC60255-275 KV Insulation resistance IEC60255-27500 V (test level) EMC Electrostatic Discharge Immunity IEC60255-26/IEC61000-4-2Level 4 Radiated RF Electromagnetic Field Immunity IEC60255-26/IEC61000-4-3Level 3 Electrical Fast Transient Immunity IEC60255-26/IEC61000-4-4Zone A Surge Immunity IEC60255-26/IEC61000-4-5Zone A Conducted RF Immunity IEC60255-26/IEC61000-4-6Level 3 Power magnetic Immunity IEC60255-26/IEC61000-4-8Level 5 Power Frequency Immunity IEC60255-26/IEC61000-4-16Zone A Damped Oscillatory Wave Immunity IEC60255-26/IEC61000-4-18 2.5 KV Common Mode 1 KV Diff. Mode Voltage Dips & InterruptionsIEC60255-26/IEC61000-4-11/ IEC 61000-4-29 Levels based on IEC61000-4-11 & IEC61000-4 -29 Ripple on DC IEC60255-26/IEC61000-4-1715% Rated DC value Radiated & Conducted Emissions IEC60255-26/CISPR11/ CI SPR22 Class A MECHANICAL Sinusoidal Vibration IEC60255-21-1Class 1 Shock & Bump IEC60255-21-2Class 1 Seismic IEC60255-21-3Class 2 Enclosure Protection IEC60255-27/IEC60529IP52 CLIMATIC Cold test (storage) IEC60068-2-1-40˚C 16 hrs Cold test (operational) IEC60068-2-1-20˚C 16 hrs Dry heat test (storage) IEC60068-2-285˚C 16 hrs Dry heat test (operational) IEC60068-2-260˚C 16 hrs Change of Temperature IEC60068-2-145 cycles (3+3) -20˚C/6 0˚C Damp Heat Humidity Cyclic IEC60068-2-306 cycles (12+12) 55˚C @ 93% R.H. Damp Heat steady state IEC60068-2-7840˚C @ 93% R.H.
CHAPTER 2: PRODUCT DESCRIPTION2.5 TECHNICAL SPECIFICATIONS GEK-113000-AFF650 DIGITAL BAY CONTROLLER 2-29 2.5.15 Approvals EAC The EAC Technical Regulations (TR) for Machines and Equipment apply to the Customs Union (CU) of the Russian Federation, Belarus, and Kazakhstan APPLICABLE COUNCIL DIRECTIVEACCORDING TO CE COMPLIANCE Low voltage directive IEC60255-27 DirectiveIEC60255-26 NORTH AMERICAULUL508 EACMachines and EquipmentTR CU 010/2011 ISOManufactured under a registered quality programISO9001 Item Description Country of origin Spain Date of manufacture See label on the F650 unit Declaration of Conformity and/or Certif icate of Conformity Available on request
2-30F650 DIGITAL BAY CONTROLLER GEK-113000-AF 2.6 EXTERNAL CONNECTIONS CHAPTER 2: PRODUCT DESCRIPTION 2.6 External connections Figure 2-2: F650 wiring diagram (189C4216H2)