Canon printer imageCLASS MF4370dn User Manual

							
Copying 
4-8
  Adjusting  Density   
      Adju stin g D en sit yAdjusting Density
You can adjust the density to the most appropriate level for the document either 
automatically or manually. 
The default setting is  (5).
 
 A dju stin g A uto m atic a lly   Adjusting  Automatically 
 You can adjust the density to the most appropriate 
level for the document automatically. 
 1 
Place documents. 
  
 For details, see “Placing Documents,” on p. 2-4. 
 2 
Press  [COPY ]. 
  
 3 
Press  [Density] twice to select 
, then press [OK]. 
                 AUTO DENSITY 
The image quality is automatically set to .
 4 
Use   –  [numeric keys] to enter the 
desired copy quantity (1 to 99). 
   A   TEXT         1
100%        LTR 
 5 
Press   [Start]. 
 If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. When scanning is 
complete, press [OK].  
						

							
Copying 
4-9
Adjusting Density
 Adju stin g M an ually   Adjusting  Manually 
 You can adjust the density to the most appropriate 
level for the document manually. 
 1 
Place documents. 
  
 For details, see “Placing Documents,” on p. 2-4. 
 2 
Press  [COPY ]. 
  
 3 
Press  [Density] to select the 
manual mode. 
 4 
Press [] or [] to adjust the copy 
density, then press [OK]. 
 -LT              DK+ DENSITY 
 []: to make light documents darker 
 [
]: to make dark documents lighter 
To cancel all settings, press  [Stop/Reset].
When you switch the mode by pressing the 
mode keys such as 
 [FAX], all settings will 
be canceled. If you want to keep the settings, 
set the density as follows: 
 [Menu]  →   →   →   →  (See 
“COPY SETTINGS,” on p. 12-4.)
–
–
–
–
 5 
Use  
–  [numeric keys] to enter the 
desired copy quantity (1 to 99). 
       TEXT/PHOTO   1 100%       LTR
Ex.
 
 6 
Press   [Start]. 
 If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. When scanning is 
complete, press [OK].  
						

							
Copying 
4-10
  Enlarge/Reduce  Images   
    En la rg e/R ed uce  I m ag esEnlarge/Reduce Images
You can convert a standard-sized document to a different standard-sized copy (preset 
zoom), or you can enlarge or reduce images in 1% increments (custom copy ratio). 
The default setting is .
 
        P re se t Z o om  Preset Zoom 
 You can enlarge or reduce standard size documents 
to another standard paper size. 
 1 
Place documents. 
  
 For details, see “Placing Documents,” on p. 2-4. 
 2 
Press  [COPY ]. 
  
 3 
Press  [Enlarge/Reduce]. 
  -      100%      + PRESET RATIO  
						

							
Copying 
4-11
 4 
Press [] or [] to select the copy 
ratio, then press [OK]. 
     78% LGL   LTR PRESET RATIO
Ex.
 
  
  
  
  
  
  
When  in the  menu is set to  or , the 
preset copy ratios change as follows:
A: 50%, 70%, 100%, 141%, 200%
AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 
141%, 200%
 5 
Use   –  [numeric keys] to enter the 
desired copy quantity (1 to 99). 
       TEXT/PHOTO  78%        LTR
Ex.
 
 6 
Press  [Start]. 
 If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. When scanning is 
complete, press [OK]. 
        C u sto m  C o p y R atio  Custom Copy Ratio 
 You can enlarge or reduce images by any copy ratio, 
in 1% increments. The available copy ratios are from 
50% to 200%. 
–
–
–
–
–
–
 1 
Place documents. 
  
 For details, see “Placing Documents,” on p. 2-4. 
 2 
Press  [COPY ]. 
  
 3 
Press  [Enlarge/Reduce] twice. 
  -       100%     + ZOOM  50-200% 
 4 
Use  –  [numeric keys] to enter the 
copy ratio, then press [OK]. 
  -       95%      +
ZOOM  50-200%
Ex.
 
 You can also use [] or [] to adjust the 
zoom ratio. To increase the zoom ratio, press 
[
]. To decrease the copy ratio, press []. 
To return the copy ratio to 100%, press 
 [Enlarge/Reduce] repeatedly to display 
, then press [OK]. 
						

							
Copying 
4-12
Enlarge/Reduce Images
 5 
Use  –  [numeric keys] to enter the 
desired copy quantity (1 to 99). 
       TEXT/PHOTO   1  95%        LTR
Ex.
 
 6 
Press  [Start]. 
 If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. When scanning is 
complete, press [OK].  
						

							
Copying 
4-13
  Collating  Copies   
      Co lla tin g C o p ie sCollating Copies
You can sort copies into sets arranged in page order. This function is useful when making 
handouts for meetings. This feature can be used together with both “2-Sided Copying,” (see 
p. 4-18) and “Multiple Documents onto One Sheet (2 on 1),” (see p. 4-15).
The default setting is .
 
 1 
Place documents. 
  
 For details, see “Placing Documents,” on p. 2-4. 
 2 
Press  [COPY ]. 
If  is set to  in 
 in , 
skip to step 4. 
						

							
Copying 
4-14
Collating Copies
 3 
Press  [Collate/2 on 1]. 
              COLLATE COLLATE/2 ON 1 
 If you want to use  and “2 on 1 
Combination” (see p. 4-15) at the same time, 
select , then press [OK]. 
  If you want to use  and the 2-
sided copying at the same time, go to step 3 
of “1 to 2-Sided Copying” (see p. 4-19), “2 to 2-
Sided Copying (MF4380dn Only)” (see p. 4-20) 
or “2 to 1-Sided Copying (MF4380dn Only)” 
(see p. 4-21).  
 4 
Use  –  [numeric keys] to enter the 
desired copy quantity (1 to 99). 
       TEXT/PHOTO   1  63%      * LTR 
 5 
Press  [Start]. 
 If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. When scanning is 
complete, press [OK]. The machine prints the 
remaining sets of copies. 
To cancel all settings, press  [Stop/Reset].
When you switch the mode by pressing the 
mode keys such as 
 [FAX], all settings will 
be canceled. If you want to keep the settings, 
set the collate mode as follows: 
 [Menu]  →   →   →   →  (See 
“COPY SETTINGS,” on p. 12-4.)”
When scanning multiple page documents, 
 may appear in the display 
and scanning may be canceled. If this happens, 
press 
 [Stop/Reset] to return to the standby 
mode.
–
–
–
   –
– 
						

							
Copying 
4-15
  Multiple Documents onto One Sheet (2 on 1)   
    Mult ip le  D ocu m en ts  o n to  O ne S h eet ( 2  o n  1 )Multiple Documents onto One Sheet (2 on 1)
This mode enables you to reduce two-page documents to fit on one sheet of paper (1-sided/
2-sided).
 
      2 o n  1  C o m bin atio n  2 on 1 Combination 
 2 on 1 mode automatically reduces two documents 
to fit on the selected paper size. You can make well-
organized copies by copying multiple documents 
onto one sheet. This mode enables you to cut print 
costs by saving copy papers, and it is also useful for 
saving space. This feature can be used together with 
both ”Collating Copies” (see p. 4-13) and ”2-Sided 
Copying” (see p. 4-18).
The default setting is . 
  
 The reduction ratio is automatically set so that the documents fit 
onto the selected paper size. 
 1 
Place documents. 
  
 For details, see “Placing Documents,” on p. 2-4.  
						

							
Copying 
4-16
Multiple Documents onto One Sheet (2 on 1)
 2 
Press  [COPY ]. 
  
 3 
Press  [Collate/2 on 1] repeatedly 
to select , then press [OK]. 
               2 ON 1 COLLATE/2 ON 1 
 If you want to use  and “Collating 
Copies” (see p. 4-13) at the same time, select 
, then press [OK]. 
  If you want to use  and the 2-sided 
copying at the same time, go to step 3 of “1 to 
2-Sided Copying” (see p. 4-19), “2 to 2-Sided 
Copying (MF4380dn Only)” (see p. 4-20) or “2 
to 1-Sided Copying (MF4380dn Only)” (see 
p. 4-21).  
 4 
Use   –  [numeric keys] to enter the 
desired copy quantity (1 to 99). 
       TEXT/PHOTO   1  63%      * LTR 
 5 
Press  [Start]. 
 If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. When scanning 
is complete, press [OK]. 
To cancel all settings, press  [Stop/Reset].
A maximum of 1/8" (4 mm) margin will be 
produced between the two reduced 
documents in 2 on 1 copying.
–
–
–
–
–
 C
o p yin g I D  C ard   Copying ID Card 
 You can make a copy of a 2-sided card onto one 
side of a paper. This mode is useful when copying ID 
cards. 
   You must place a document on the platen glass when using 
this function. 
 The zoom ratio will automatically be set to  with this 
feature. You cannot change the copy size. 
 The paper size you can use is LTR or A4. If you select other 
paper size in the paper size setting, the ID card copy function 
will be canceled automatically.  
 When you select the ID card copy, the other copy settings you 
made, such as the copy ratio and paper size, will be canceled 
automatically. 
 This function cannot be used with the 2 on 1 mode, the 
collating mode, or the 2-sided copying mode. 
 1 
Place a card on the platen glass. 
 Place a card as indicated below. 
  
 Align the center of a card with the arrow 
mark. 
 2 
Press  [COPY ]. 
  
 3 
Press  [Collate/2 on 1] repeatedly 
to select , then press 
[OK]. 
         ID CARD COPY COLLATE/2 ON 1 
–
–
–
–
–
–
– 
						

							
Copying 
4-17
Multiple Documents onto One Sheet (2 on 1)
 4 
Use  –  [numeric keys] to enter the 
desired copy quantity (1 to 99). 
       TEXT/PHOTO   1 100%      * LTR
Ex.
 
 5 
Press  [start]. 
  
 6 
Turn and place the card. 
 Place the card as indicated below. 
  
 Align the center of a card with the arrow 
mark. 
 7 
Press  [start]. 
To cancel all settings, press  [Stop/Reset]
–
–