Canon printer Color imageCLASS MF8450c User Manual
Have a look at the manual Canon printer Color imageCLASS MF8450c User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 127
3-50
Storing/Editing One-Touch
Storing/Editing Address Book
Erasing Addresses Registered in One-Touch
This section describes the procedure for erasing addresses registered in one-touch.
This section describes how to erase one-touch destinations from the Additional Functions screen. You can also erase them from the
Select Send Type screen, as follows:In the Select Send Type screen, press the right Any key to select .
Use [▼], [▲] or
(Scroll Wheel) to select the one-touch you want to erase.
Press the...](http://img.usermanuals.tech/thumb/14/914/w64_printer-color-imageclass-mf8450c-1478268001_d-126.png "Page 127
3-50
Storing/Editing One-Touch
Storing/Editing Address Book
Erasing Addresses Registered in One-Touch
This section describes the procedure for erasing addresses registered in one-touch.
This section describes how to erase one-touch destinations from the Additional Functions screen. You can also erase them from the
Select Send Type screen, as follows:In the Select Send Type screen, press the right Any key to select .
Use [▼], [▲] or
(Scroll Wheel) to select the one-touch you want to erase.
Press the...")
![Page 128
3-51
Storing/Editing One-Touch
Storing/Editing Address Book
6
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
7
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
If you want to cancel erasing the destination,
select .
8
Press (Main Menu) to return to the
Main Menu screen.](http://img.usermanuals.tech/thumb/14/914/w64_printer-color-imageclass-mf8450c-1478268001_d-127.png "Page 128
3-51
Storing/Editing One-Touch
Storing/Editing Address Book
6
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
7
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
If you want to cancel erasing the destination,
select .
8
Press (Main Menu) to return to the
Main Menu screen.")
![Page 133
Copying
4-4
Basic Copying Method
Basic Copying Method
This section describes the basic procedure for copying.
1
Place originals on the platen glass or load
it them in the feeder.
For details, see “Placing Originals,” on p. 2-4.
Close the feeder after placing your originals.
For originals you can copy, see “Originals
R
equirements,” on p. 2- 2.
2
Press (Main Menu).
3
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
–
–
–
4
Make the copy settings you require.
You can specify the...](http://img.usermanuals.tech/thumb/14/914/w64_printer-color-imageclass-mf8450c-1478268001_d-132.png "Page 133
Copying
4-4
Basic Copying Method
Basic Copying Method
This section describes the basic procedure for copying.
1
Place originals on the platen glass or load
it them in the feeder.
For details, see “Placing Originals,” on p. 2-4.
Close the feeder after placing your originals.
For originals you can copy, see “Originals
R
equirements,” on p. 2- 2.
2
Press (Main Menu).
3
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
–
–
–
4
Make the copy settings you require.
You can specify the...")
![Page 136
Copying
4-7
Selecting Color Mode
1
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2
Press (Main Menu).
3
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
4
Use [▼], [▲] or (Scroll Wheel) to
display , then
press [OK].
5
Use [▼], [▲] or (Scroll Wheel) to select
the color mode, then press [OK].
: For the automatic
selection of color or B&W
: For copies in full-color
: For black and white copies
–
–
–
Selecting Color Mode
This section describes how to select the...](http://img.usermanuals.tech/thumb/14/914/w64_printer-color-imageclass-mf8450c-1478268001_d-135.png "Page 136
Copying
4-7
Selecting Color Mode
1
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2
Press (Main Menu).
3
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
4
Use [▼], [▲] or (Scroll Wheel) to
display , then
press [OK].
5
Use [▼], [▲] or (Scroll Wheel) to select
the color mode, then press [OK].
: For the automatic
selection of color or B&W
: For copies in full-color
: For black and white copies
–
–
–
Selecting Color Mode
This section describes how to select the...")
Copying 4-2 Overview of Copy Functions Overview of Copy Functions In addition to the enlarging/reducing the copy, you can make 2-sided copies or use the N on 1 mode, which reduces multiple originals to fit on one sheet of paper. (p. 4-11) (p. 4-34) (p. 4-17)
Copying 4-3 Overview of Copy Functions (p. 4-22)(p. 4-30) (p. 4-36)
Copying 4-4 Basic Copying Method Basic Copying Method This section describes the basic procedure for copying. 1 Place originals on the platen glass or load it them in the feeder. For details, see “Placing Originals,” on p. 2-4. Close the feeder after placing your originals. For originals you can copy, see “Originals R equirements,” on p. 2- 2. 2 Press (Main Menu). 3 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. – – – 4 Make the copy settings you require. You can specify the following settings: : Specifies the color or B&W. (See “S electing Color Mode,” on p. 4-7.) : Specifies the paper source. (See “S electing Paper Source,” on p. 4- 9.) : Adjusts the density and the background color of originals. (See “A djusting Density,” on p. 4-17) : Makes two-sided copies. (See “2-Sided C opying,” on p. 4-22.) : Adjusts the size by enlarging/reducing original images. (See “Enlar ge/Reduce Images,” on p. 4-30.) : Specifies the image type of originals. (See “Selecting I mage Quality,” on p. 4-3 4.) : Reduces multiple originals to fit on one sheet of paper. (See “Multiple Originals onto One Sheet (N on 1), ” on p. 4-3 6.) : Adjusts the contrast of the originals. (See “Adjusting Sharpness,” on p . 4-3 9.) : Erases unnecessary shadows and lines. (See “Erasing Shado ws/Lines,” on p. 4-4 1.) : Adjusts the color balance for the copy. (See “Adjusting Color Balance ,” on p. 4-5 1.) : Sorts copies into sets. (See “C ollating Copies,” on p. 4-57.) – – – – – – – – – – –
Copying 4-5 Basic Copying Method : Makes multiple copies. (See “M aking Multiple Copies,” on p. 4- 59.) When you press (Reset), all settings will return to the Standard mode. If you want to keep your own settings as the Standard mode, see “Chang ing Standard Mode,” on p. 4- 66. 5 Use – (numeric keys) to enter the desired copy quantity (1 to 99). If you make a mistake when entering values, press (Clear) and enter the correct values. The copy quantity appears on the right side of the Copy top screen. You cannot change the copy quantity while the machine is copying. – – 6 Press (Start) to start copying. When scanning is complete, remove your originals. You cannot change copy mode settings, such as the copy quantity, paper size, and copy ratio, while the machine is copying. If you want to cancel a copy job, see “C anceling Copy Jobs,” on p. 4-6, or “Checking and Canceling Copy Jobs/Checking Copy L ogs,” on p. 4-6 9. To cancel all settings and return the machine to the Standard mode, press (Reset). If the machine remains idle for more than two minutes, the display returns to the Main Menu screen (Auto Clear Time). You can change the value of time for the Auto Clear Time. For details, see “Setting Auto Clear Time,” on p . 1-2 3. If you want to make another copy when there is an ongoing job, press the right Any key to select . Then repeat from the step 1. 7 Press (Main Menu) to return to the Main Menu screen. – – – – –
Copying 4-6 Canceling Copy Jobs Canceling Copy Jobs You can cancel scanning or ongoing jobs. If you cancel a copy job during scanning, make sure to remove the original. 1 Press the left Any key to select . The display will return to the Copy top screen. While the machine is scanning, printing, or waiting to print, you can cancel a copy job by pressing (Stop). 2 Press (Main Menu) to return to the Main Menu screen.
Copying 4-7 Selecting Color Mode 1 Set originals. For details, see “Placing Originals,” on p. 2-4. 2 Press (Main Menu). 3 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 4 Use [▼], [▲] or (Scroll Wheel) to display , then press [OK]. 5 Use [▼], [▲] or (Scroll Wheel) to select the color mode, then press [OK]. : For the automatic selection of color or B&W : For copies in full-color : For black and white copies – – – Selecting Color Mode This section describes how to select the color mode (color/B&W). The default setting is .
Copying 4-8 Selecting Color Mode 6 Use – (numeric keys) to enter the desired copy quantity (1 to 99). 7 Press (Start). If you want to copy multiple originals using the platen glass, set an original and press (Start) once for each page. 8 Press (Main Menu) to return to the Main Menu screen.
Copying 4-9 Selecting Paper Source Selecting Paper Source You can manually specify a paper source. The default setting is . If you are copying an original with an image that extends all the way to the edges onto the same size paper at a copy ratio of 100%, the periphery of the original image may be cut off slightly on the copy. For details, see “Scanning Area,” on p. 11-4. The suffix (such as in STMTR), used in paper size designations, indicates that the paper is loaded in a paper drawer or the stack bypass tray horizontally. Copying on Papers in Drawers You can select paper drawer 1 or 2 (optional) for a copy. You need to set up the paper size and type for each drawer in advance. For details about configuring the paper size and type, see “Setting Paper Size and Type,” on p . 2-2 0. – – 1 Set originals. For details, see “Placing Originals,” on p. 2-4. 2 Press (Main Menu). 3 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 4 Use [▼], [▲] or (Scroll Wheel) to display , then press [OK].
Copying 4-10 Selecting Paper Source 5 Use [▼], [▲] or (Scroll Wheel) to select the desired paper source, then press [OK]. 6 Use – (numeric keys) to enter the desired copy quantity (1 to 99). 7 Press (Start). If you want to copy multiple originals using the platen glass, set an original and press (Start) once for each page. 8 Press (Main Menu) to return to the Main Menu screen.
Copying 4-11 Selecting Paper Source 1 Set originals. For details, see “Placing Originals,” on p. 2-4. 2 Press (Main Menu). 3 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 4 Load the paper into the stack bypass tray. 5 Use [▼], [▲] or (Scroll Wheel) to select the desired paper size, then press [OK]. You can select from the following paper sizes: , , , , , , , , , For details, see “P aper Requirements,” on p. 2-7. The available paper sizes will vary depending on the country where the unit was purchased. Using Stack Bypass Tray with Standard Paper Sizes This section describes how to copy onto standard-sized paper using the stack bypass tray. If setting in from the Additional Functions screen is set to , the paper size/type setting screen appears when you load a paper in the stack bypass tray. If Stack Bypass Standard Settings is set to , copying can be performed only for the registered paper size and type. (See “S etting Paper Size and Type,” on p. 2-20.)