Canon printer Color imageCLASS MF8450c User Manual

							Before Using the Machine
1-26
Timer Settings
12
 Use [▼], [▲] or  (Scroll Wheel) to select 
the day of the Week, then press [OK].
13
  Press the right Any key to select .
The End Date Month to End DST screen appears.
14
 Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
15
  Use [▼], [▲] or  (Scroll Wheel) to select 
the month when the daylight saving time 
ends, then press [OK].
16
  Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
17
  Use [▼], [▲] or  (Scroll Wheel) to select 
the week, then press [OK].
18
  Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK]. 
						

							Before Using the Machine
1-27
Timer Settings
19
 Use [▼], [▲] or  (Scroll Wheel) to select 
the day of the Week, then press [OK].
20
  Press the right Any key to select .
21
 Press  (Main Menu) to return to the 
Main Menu screen. 
						

							Before Using the Machine
1-28
Timer Settings 
						

							2-1
 
Originals and Print Media
This chapter describes the types of paper and originals that can be used with the machine and how to load paper 
into the stack bypass tray.
Originals Requirements .............................................. 2-2
Scanning Area  .............................................................. 2-3
Placing Originals  .......................................................... 2-4
On the Platen Glass  .............................................................2-4
In the Feeder  ........................................................................\
.2-5
Paper Requirements  .................................................... 2-7
Printable Area  .............................................................. 2-9
Loading Paper  ............................................................2-10
In the Paper Drawer  ......................................................... 2-10
In the Stack Bypass Tray  .................................................. 2-15
Setting Paper Size and Type  .....................................2-20
For the Stack Bypass Tray  ............................................... 2-20
For the Paper Drawer  ....................................................... 2-22
Relationship between Original Orientation and 
Preprinted Paper Output Chart  ................................2-24
Originals and 
Print Media
Chapter
2    
						

							2-2
Originals Requirements
Originals and Print Media
Originals Requirements
Available original type, size, weight and quantity are shown in the table below.
Platen GlassFeeder
TypeSheet*1, book, three-dimensional objects Sheet
Size (W × L) Max. 8 1/2" × 14"
(Max. 215.9

 mm × 355.6 mm) Max. 14" × 8.5" (355.6 mm × 215.9 mm)*2
Min. 5" × 5.5" (128 mm × 139.7 mm)*2
Weight
Max. 4.4 lb (2 kg) One-sided scanning (1 page): 13 to 34 lb (50 to 
128
 g/m2)*3
One-sided scanning (more than 2 pages): 13 to 28 lb 
(50 to 105 g/m2)*4
Two-sided scanning: 17 to 28 lb (64 to 105 g/m2)
Quantity 1 sheet Max. 50
  sheets*5
(Max. 30 sheets for LGL originals)
*1 When copying transparent originals such as tracing paper or transparencies, use a piece of plain white paper to cover the 
original after placing it face-down on the platen glass.
*
2  When copying two-sided originals, only LTR, LGL, FLSC, A4 can be used.
*
3  17 to 34 lb (64 to 128 g/m2) for paper smaller than LTR/A4.
*
4  17 to 28 lb (64 to 105 g/m2) for paper smaller than LTR/A4.
*
5  20 lb (75 g/m2) paper
Do not place the originals on the platen glass or in the feeder until the glue, ink or correction fluid on the 
originals are completely dry.
Remove all fasteners (staples, paper clips, etc.) before loading the originals in the feeder.
To prevent original jams in the feeder, do not use any of the following:
Wrinkled or creased paper
Carbon paper or carbon-backed paper
Curled or rolled paper
Coated paper
Torn paper
Onion skin or thin paper
Paper printed with a thermal transfer printer
TransparenciesÔ
Ô
Ô
–
–
–
–
–
–
–
– 
						

							2-3
Scanning Area
Originals and Print Media
Scanning Area
Make sure your originals' text and graphics fall within the shaded area in the following 
diagram. Note that the margin widths listed are approximate and there may be slight 
variations in actual use.
Copy Scanning Area
Fax Scanning Area
Ô
Ô 
						

							2-4
Placing Originals
Originals and Print Media
Placing Originals
Place your originals on the platen glass or into the feeder, depending on the size and type 
of the original, and the copy modes that you want to use.
On the Platen Glass
Place the originals on the platen glass when copying bound originals (such as books and magazines), heavy or 
lightweight originals, and transparencies.
1 
Lift up the feeder.
2 
Place your original face down.
3 
Align the original with the appropriate 
paper size marks.
If your original does not match any of the paper 
size marks, align the center of your original with 
the arrow mark. 
						

							2-5
Placing Originals
Originals and Print Media
4 
Gently close the feeder.
The original is ready for scanning.
When closing the feeder, be careful not to get 
your fingers caught, as this may result in 
personal injury.
Do not press down the feeder forcefully, as this 
may damage the platen glass and cause 
personal injury.
–
–
Remove the original from the platen glass when 
scanning is complete.
In the Feeder
Place the originals into the feeder when you want to copy several originals at the same time, and press  
(Start). The machine automatically feeds the originals to the scanning area and scans them.
1 
Fan the originals stack and even the 
edges.
2 
Adjust the slide guides to the width of the 
originals. 
						

							2-6
Placing Originals
Originals and Print Media
3 
Neatly place the originals face up in the 
original supply tray.
The originals are ready for scanning.
Do not add or remove originals while they are 
being scanned.
When scanning is complete, remove the 
originals from the originals delivery tray to 
avoid paper jams.
Avoid using feeder to scan the same originals 
more than 30 times. When scanned repeatedly, 
originals can become folded or torn, which 
may cause paper jams.
If the feeder rollers are soiled from scanning 
originals written in pencil, clean them. (See 
“Cleaning the M
achine,” on p. 11-2.)
–
–
–
– 
						

							2-7
Paper Requirements
Originals and Print Media
Paper Requirements
The paper size and types that can be used with this machine are shown in the following 
table. 
Paper drawer(s)Stack bypass tray
Size (W × L) Legal*9, Letter*9, Officio, M-Officio, 
B-Offficio, Executive, Foolscap*9, 
A4*9, B5, A5 3" × 5" to Legal (8 1/2" × 14") (76.2 
× 127 to 215.9

 mm x 355.6 mm) 
(Always set vertically.)
Weight 16 to 32
  lb
(60 to 120 g/m2) 16 to 47 lb
(60 to 176 g/m2)
Quantity Max. 250 sheets *
1 *8Max. 100 sheets *1
TypePlain *2*9○ ○
Plain H *
3*9○ ○
Color *
2*9○ ○
Recycled *
2*9○ ○
Heavy 1 *
4*9○ ○
Heavy 2 *
5— ○
Bond *
6*9○ ○
Transparency *
7— ○
Labels —
○
Envelopes —
○
Rough *
9○ ○
(○: available —: not available)
*1  20 lb (75 g/m2) paper
*
2  From 19 to 24 lb (70 to 90 g/m2)
*
3 From 20 to 28 lb (75 to 105 g/m2)
*
4  From 28 to 32 lb (106 to 120 g/m2)
*
5  From 32 to 47 lb (121 to 176 g/m2)
*
6  20 lb (75 g/m2)
*
7  Use only LTR transparencies made especially for this machine.
*
8  Max. 500 sheets of paper can be set in the optional Paper Drawer (Paper Drawer 2).
*
9  Can be used for two-sided copying.
 The default paper size is LTR. If you use a different paper size, you must change the paper size settings. (See “Setting Paper Size and Type,” 
on p
. 2-20.)