Canon Pixma Ip4700 User Guide

							Check the Page Size list. W hen you want to change, select another page size from the list. The list
displays only sizes that can be used for borderless printin g. 
4.Adjust the amount of extension from the paper 
If necessary, adjust the amount of extension using the Amount of Extension slider.
Moving the slider to the right makes the amount lar ger and moving the slider to the left makes the
amount smaller. 
It is recommended to set the slider at the second position  from the right for most cases. 
Important 
W hen you set the slider at the rightmost position, the back side of the paper may become
smudged. 
5.Complete the setup  
Click OK. 
The data will be printed without any margins on the  paper. 
Important 
W hen a page size that cannot be used for borderless  printing is selected, the size is automatically
changed to the valid page sizes for borderless prin ting. 
W hen High Resolution Paper, T-Shirt Transfers, or E nvelope is selected from the Media Type list on
the Main tab, you cannot perform borderless printin g. 
W hen Borderless is selected, the Printer Paper Size , Staple Side (when Duplex Printing is not
selected) settings, and the Stamp/Background... but ton on the Page Setup tab appear grayed out
and are unavailable. 
Print quality may deteriorate or the sheet may be s tained at the top and bottom depending on the
type of the media used. 
W hen the ratio of the height to the width differs f rom the image data, a portion of the image may not
be printed depending on the size of the media used. 
In this case, crop the image data with an applicati on software according to the paper size. 
Note 
W hen Plain Paper is selected for Media Type on the  Main tab, borderless printing is not
recommended, and therefore the dialog box for media  selection appears.
W hen you are using plain paper for test printing, s elect Plain Paper, and click OK. 
Expanding the Range of the Document to Print 
Specifying a large amount of extension allows you to p erform borderless printing with no problems.
However, the portion of the document that extends o ff the paper range will not be printed. Subjects
around the perimeter of a photo may not be printed.  
Try borderless printing once. W hen you are not sati sfied with the result of borderless printing, reduce the
amount of extension. The extension amount becomes shorte r as the Amount of Extension slider is
moved to the left. 
Important 
W hen the amount of extension is shortened, an unexp ected margin may be produced on the print,
depending on the size of the paper. 
Note 
W hen the Amount of Extension slider is set to the l eftmost position, image data will be printed in the
full size. 
W hen Preview before printing is checked on the Main  tab, you can confirm before printing whether
there will be no border.  Page 231 of 437 pages
Borderless Printing
JownloadedhfromhManualsPrinterDcomhManuals  
						

							Page top
Page 232 of 437 pages
Borderless Printing
JownloadedhfromhManualsPrinterDcomhManuals 
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Fit-
to-Page Printing 
Fit-to-Page Printing 
The procedure for printing a document that is autom atically enlarged or reduced to fit the page size to be
used is as follows: 
1.Open the printer driver setup window
2.
Set fit-to-page printing  
Select Fit-to-Page from the Page Layout list on the  Page Setup tab. 
3.Select the paper size for the data  
Using Page Size, select the page size that is set with your application. 
4.Select the print paper size  
Select the size of the paper loaded in the printer from the Printer Paper Size list.
W hen the Printer Paper Size is smaller than the Pag e Size, the page image will be reduced. W hen
the Printer Paper Size is larger than the Page Size , the page image will be enlarged. 
The current settings are displayed in the settings  preview on the left side of the printer driver.  Page 233 of 437 pages
Fit-to-Page Printing
JownloadedhfromhManualsPrinterDcomhManuals    
						

							5.Complete the setup  
Click OK. 
W hen you execute print, the document will be enlarged or reduced to fit to the page size. 
Page top
Page 234 of 437 pages
Fit-to-Page Printing
JownloadedhfromhManualsPrinterDcomhManuals  
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Scaled Printing 
Scaled Printing 
The procedure for printing a document with pages enlar ged or reduced is as follows: 
1.Open the printer driver setup window
2.
Set scaled printing  
Select Scaled from the Page Layout list on the Page  Setup tab. 
3.Select the paper size for the data  
Using Page Size, select the page size that is set with your application. 
4.Set the scaling rate by using one of the following met hods: 
Select a Printer Paper Size  
W hen the printer paper size is smaller than the Page Size, the page image will be reduced.
W hen the printer paper size is larger than the Page  Size, the page image will be enlarged. Page 235 of 437 pages
Scaled Printing
JownloadedhfromhManualsPrinterDcomhManuals    
						

							Specify a scaling factor  
Directly type in a value into the Scaling box. 
The current settings are displayed in the settings preview on the left side of the printer driver. 
5.Complete the setup  
Click OK. 
W hen you execute print, the document will be printe d with the specified scale. 
Important 
W hen the application software with which you create d the original has the scaled printing function,
configure the settings on your application software . You do not need to configure the same setting
in the printer driver. 
W hen Scaled is selected, the Staple Side list box a ppears grayed out and is unavailable (when
Duplex Printing is not selected). 
Note 
Page 236 of 437 pages
Scaled Printing
JownloadedhfromhManualsPrinterDcomhManuals   
						

							Selecting Scaled changes the printable area of the document. 
Page top
Page 237 of 437 pages
Scaled Printing
JownloadedhfromhManualsPrinterDcomhManuals 
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Page Layout Printing 
Page Layout Printing 
The page layout printing function allows you to pri nt more than one page image on a single sheet of
paper. 
The procedure for performing page layout printing i s as follows: 
1.Open the printer driver setup window
2.
Set page layout printing  
Select Page Layout from the Page Layout list on the  Page Setup tab.
The current settings are displayed in the settings  preview on the left side of the printer driver. 
3.Select the print paper size  
Select the size of the paper loaded in the printer from the Printer Paper Size list.
Setting the layout of two pages of the document fro m left to right is complete. 
4.Set the number of pages to be printed on one sheet an d the page order 
If necessary, click Specify..., specify the followi ng settings in the Page Layout Printing dialog box,  and
click OK.  Page 238 of 437 pages
Page Layout Printing
JownloadedhfromhManualsPrinterDcomhManuals    
						

							Pages  
To increase the number of pages to be included on a single sheet of paper, select a desired
number of pages from the list. 
You can also set 2-Page Print or 4-Page Print on the Quick Setup tab. 
Page Order 
To change the page arrangement order, select an ico n from the list to change the page placement
order.  
Page Border  
To print a page border around each document page, c heck this check box. 
5.Complete the setup  
Click OK on the Page Setup tab. 
W hen you execute print, the specified number of pages will be arranged on each sheet of paper in
the specified order. 
Page top
Page 239 of 437 pages
Page Layout Printing
JownloadedhfromhManualsPrinterDcomhManuals  
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Poster Printing 
Poster Printing 
The poster printing function allows you to enlarge  image data, divide it into several pages, and print
these pages on separate sheets of paper. W hen the p ages are pasted together, they form a large print
like a poster. 
The procedure for performing poster printing is as foll ows: 
Setting Poster Printing 
1.Open the printer driver setup window
2.
Set poster printing  
Select Poster from the Page Layout list on the Page  Setup tab.
The current settings are displayed in the settings  preview on the left side of the printer driver. 
3.Select the print paper size  
Select the size of the paper loaded in the printer from the Printer Paper Size list.
Setting 2 by 2-page poster printing is complete.  Page 240 of 437 pages
Poster Printing
JownloadedhfromhManualsPrinterDcomhManuals