Canon Pixma Ip4700 User Guide

							The facial area in and around the selected area is sharpened and the  (Correction/
Enhancement) mark appears on the upper left of the  image.
Note
You can also drag to rotate the selected area.
Click Undo to undo the preceding correction operation.
6.Click Save Selected Image or Save All Corrected Images. 
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Imag e. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for corrected im ages.
7.Click Exit.
Important
The corrections will be lost if you exit before saving corrected images.
Page top
Page 161 of 437 pages
Using the Face Sharpener Function
JownloadedhfromhManualsPrinterDcomhManuals  
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and
Enhancing Photos > Using the Digital Face Smoothing Function
Using the Digital Face Smoothing Function
You can enhance skin beautifully by removing blemishes a nd wrinkles.
You can perform the Digital Face Smoothing function  either automatically or manually.
1.Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that  case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to enhance from the list disp layed in the lower part of the
Correct/Enhance Images window. 
The image appears in Preview.
Note
If only one image is selected, the thumbnail does n ot appear below Preview.
Auto Enhancement
3.Make sure that Auto is selected. Page 162 of 437 pages
Using the Digital Face Smoothing Function
JownloadedhfromhManualsPrinterDcomhManuals     
						

							4.Click Digital Face Smoothing.
Note
Effect levels can be changed using the slider below Digital Face Smoothing.
5.Click OK. 
Skin is enhanced beautifully and the 
 (Correction/Enhancement) mark appears on the upper  left
of the image.
Note
Click  (Compare) to display the images before and after the  enhancement side by side so
that you can compare and check the result.
Click Reset Selected Image to undo the enhancement  operation.
If you want to apply the enhancement to all the selected images at once, select the Apply to all
images checkbox.
Manual Enhancement
3.Click Manual, then click Correct/Enhance.
4.Click Digital Face Smoothing.
Note
Effect levels can be changed using the slider below  Digital Face Smoothing.
Move the cursor over the image. The shape of the cu rsor changes to  (Cross).
5.Drag to select the area you want to enhance, then click  OK that appears over the
image. Page 163 of 437 pages
Using the Digital Face Smoothing Function
JownloadedhfromhManualsPrinterDcomhManuals  
						

							Skin in and around the selected area is enhanced beautifully and the  (Correction/Enhancement)
mark appears on the upper left of the image.
Note
You can also drag to rotate the selected area.
Click Undo to undo the preceding enhancement operat ion.
6.Click Save Selected Image or Save All Corrected Images. 
You can save enhanced images as new files.
Note
To save only the image you like, click Save Selected Imag e. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for enhance d images.
7.Click Exit.
Important
The enhancements will be lost if you exit before sa ving enhanced images.
Page top
Page 164 of 437 pages
Using the Digital Face Smoothing Function
JownloadedhfromhManualsPrinterDcomhManuals  
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and
Enhancing Photos > Using the Blemish Remover Function
Using the Blemish Remover Function
You can remove moles.
1.Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that  case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to enhance from the list disp layed in the lower part of the
Correct/Enhance Images window. 
The image appears in Preview.
Note
If only one image is selected, the thumbnail does n ot appear below Preview.
3.Click Manual, then click Correct/Enhance.
4.Click Blemish Remover. Page 165 of 437 pages
Using the Blemish Remover Function
JownloadedhfromhManualsPrinterDcomhManuals     
						

							Note
Move the cursor over the image. The shape of the cursor changes to  (Cross).
5.Drag to select the area you want to enhance, then click  OK that appears over the
image.
Moles in and around the selected area are removed a nd the  (Correction/Enhancement) mark
appears on the upper left of the image.
Note
Click Undo to undo the preceding enhancement operat ion.
6.Click Save Selected Image or Save All Corrected Images. 
You can save enhanced images as new files.
Note
To save only the image you like, click Save Selected Imag e. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for enhance d images.
7.Click Exit.
Important
The enhancements will be lost if you exit before sa ving enhanced images.
Page top
Page 166 of 437 pages
Using the Blemish Remover Function
JownloadedhfromhManualsPrinterDcomhManuals   
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and
Enhancing Photos > Adjusting Images
Adjusting Images
You can make fine adjustments to the overall bright ness, contrast, etc. of images.
1.Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that  case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to adjust from the list displ ayed in the lower part of the
Correct/Enhance Images window. 
The image appears in Preview.
Note
If only one image is selected, the thumbnail does n ot appear below Preview.
3.Click Manual, then click Adjust.
4.Move the slider of the item you want to adjust and set  the effect level.
The following adjustments are available:
Brightness 
Contrast Page 167 of 437 pages
Adjusting Images
JownloadedhfromhManualsPrinterDcomhManuals     
						

							Sharpness
Blur
Show-through Removal
Note
Click Defaults to reset all adjustments.
5.Click Save Selected Image or Save All Corrected Images. 
You can save adjusted images as new files.
Note
To save only the image you like, click Save Selected Image. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for adjuste d images.
6.Click Exit.
Important
The adjustments will be lost if you exit before saving  adjusted images.
Page top
Page 168 of 437 pages
Adjusting Images
JownloadedhfromhManualsPrinterDcomhManuals  
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and
Enhancing Photos
 > Correct/Enhance Images W indow
Correct/Enhance Images Window
You can correct/enhance images in this window. 
To display the Correct/Enhance Images window, click  
 (Correct/Enhance Images) in the Select
Images or Edit screen, or in the Layout/Print scree n of Photo Print.
(1)Toolbar
Toolbar
 (Zoom In/Zoom Out)
Displays the enlarged or reduced preview of the pag e.
 (Full Screen)
Displays the entire image in Preview.
 (Compare)
Displays the Compare Images window. You can compare  the images before and after the correction/
enhancement side by side.
The image before the correction/enhancement is displayed on the left, and the image after the
correction/enhancement is displayed on the right. Page 169 of 437 pages
Correct/Enhance Images Window
JownloadedhfromhManualsPrinterDcomhManuals     
						

							(2)Task Area
Available tasks and settings may vary between the Auto and Manual tabs.
Click Auto or Manual to display the corresponding t ab.
Auto Tab 
Select to correct automatically.
Auto Photo Fix
Applies automatic corrections suitable for photos.
Important
The Auto Photo Fix function is not available for Photo  Print. Photo Print allows you to
automatically apply suitable corrections to all photos wh en printing. Select this option in Color
correction for printing on the Advanced tab of the  Preferences dialog box. To display the
Preferences dialog box, click 
 (Settings) in the Layout/Print screen or select Pr eferences...
from the File menu.
Prioritize Exif Info Select this checkbox to apply corrections primarily  based on the settings made at the time ofPage 170 of 437 pages
Correct/Enhance Images Window
JownloadedhfromhManualsPrinterDcomhManuals