Canon Pixma Ip4700 User Guide

							Adjusting Images
Page top
Page 151 of 437 pages
Correcting and Enhancing Photos
JownloadedhfromhManualsPrinterDcomhManuals 
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and
Enhancing Photos > Using the Auto Photo Fix Function
Using the Auto Photo Fix Function
Apply optimum corrections automatically to the phot os used for an album, calendar, etc.
Important
The Auto Photo Fix function is not available for Photo  Print. Photo Print allows you to automatically
apply suitable corrections to all photos when print ing, by selecting Auto Photo Fix in Color correction
for printing on the Advanced tab of the Preferences  dialog box. To display the Preferences dialog
box, click 
 (Settings) in the Layout/Print screen or select Pr eferences... from the File menu.
Once image is corrected with Auto Photo Fix and sav ed, it cannot be corrected again with Auto
Photo Fix. 
Also, Auto Photo Fix may not be available for image s edited using an application, digital camera,
etc. manufactured by other companies.
1.Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that  case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to correct from the list  displayed in the lower part of the
Correct/Enhance Images window. 
The image appears in Preview. Page 152 of 437 pages
Using the Auto Photo Fix Function
JownloadedhfromhManualsPrinterDcomhManuals     
						

							Note
If only one image is selected, the thumbnail does not appear below Preview.
3.Make sure that Auto is selected.
4.Click Auto Photo Fix, then click OK. 
The entire photo is corrected automatically and the 
 (Correction/Enhancement) mark appears on
the upper left of the image.
Note
Click  (Compare) to display the images before and after t he correction side by side so that
you can compare and check the result.
Click Reset Selected Image to undo the correction o peration.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
Select the Prioritize Exif Info checkbox to apply c orrections primarily based on the settings
made at the time of shooting. 
Deselect this checkbox to apply corrections based on the ima ge analysis results. It is
recommended that you normally select this setting.
5.Click Save Selected Image or Save All Corrected Images. 
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Imag e. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for corrected im ages.
6.Click Exit.
Important
The corrections will be lost if you exit before saving corrected images.
Page top
Page 153 of 437 pages
Using the Auto Photo Fix Function
JownloadedhfromhManualsPrinterDcomhManuals 
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and
Enhancing Photos > Using the Red-Eye Correction Function
Using the Red-Eye Correction Function
You can correct red eyes caused by a camera flash. 
You can perform the Red-Eye Correction function eit her automatically or manually.
Note
Photo Print allows you to automatically correct red eyes when printing. To correct automatically,
select Enable Auto Photo Fix in Color correction fo r printing on the Advanced tab of the Preferences
dialog box and select the Enable Red-Eye Correction  checkbox.
1.Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that  case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to correct from the list  displayed in the lower part of the
Correct/Enhance Images window. 
The image appears in Preview.
Note
If only one image is selected, the thumbnail does n ot appear below Preview.
Page 154 of 437 pages
Using the Red-Eye Correction Function
JownloadedhfromhManualsPrinterDcomhManuals     
						

							Auto Correction
3.Make sure that Auto is selected.
4.Click Red-Eye Correction.
5.Click OK. 
Red eyes are corrected and the 
 (Correction/Enhancement) mark appears on the upper left of
the image.
Important
Areas other than the eyes may be corrected dependin g on the image.
Note
Click  (Compare) to display the images before and after the correction side by side so that
you can compare and check the result.
Click Reset Selected Image to undo the correction o peration.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
Manual Correction
3.Click Manual, then click Correct/Enhance.
4.Click Red-Eye Correction.
Note
Effect levels can be changed using the slider below  Red-Eye Correction.
Move the cursor over the image. The shape of the cu rsor changes to  (Paintbrush).
5.Drag to select the red area you want to correct, th en click OK that appears over the
image. Page 155 of 437 pages
Using the Red-Eye Correction Function
JownloadedhfromhManualsPrinterDcomhManuals  
						

							Red eye is corrected and the  (Correction/Enhancement) mark appears on the upper left of the
image.
Note
Click Undo to undo the preceding correction operati on.
6.Click Save Selected Image or Save All Corrected Images. 
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Imag e. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for corrected im ages.
7.Click Exit.
Important
The corrections will be lost if you exit before saving corrected images.
Page top
Page 156 of 437 pages
Using the Red-Eye Correction Function
JownloadedhfromhManualsPrinterDcomhManuals  
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and
Enhancing Photos > Using the Face Brightener Function
Using the Face Brightener Function
You can brighten dark faces caused by bright backgr ound.
Note
You can brighten dark photos caused by bright backg round automatically by selecting Auto Photo
Fix. 
If the correction had not been made sufficiently, a pplying Face Brightener function is recommended.
Using the Auto Photo Fix Function
1.
Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that  case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to correct from the list  displayed in the lower part of the
Correct/Enhance Images window. 
The image appears in Preview.
Note
If only one image is selected, the thumbnail does n ot appear below Preview.
3.Click Manual, then click Correct/Enhance. Page 157 of 437 pages
Using the Face Brightener Function
JownloadedhfromhManualsPrinterDcomhManuals     
						

							4.Click Face Brightener.
Note
Effect levels can be changed using the slider below Face Brightener.
Move the cursor over the image. The shape of the cu rsor changes to  (Cross).
5.Drag to select the area you want to correct, then c lick OK that appears over the
image.
The entire image is corrected so that the selected  area containing the face becomes brighter, and
the 
 (Correction/Enhancement) mark appears on the upper  left of the image.
Note
You can also drag to rotate the selected area.
Click Undo to undo the preceding correction operation.
6.Click Save Selected Image or Save All Corrected Images. 
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Imag e. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for corrected im ages.
7.Click Exit.
Important
The corrections will be lost if you exit before saving corrected images.
Page top
Page 158 of 437 pages
Using the Face Brightener Function
JownloadedhfromhManualsPrinterDcomhManuals   
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and
Enhancing Photos
 > Using the Face Sharpener Function
Using the Face Sharpener Function
You can sharpen out-of-focus faces in a photo. 
You can perform the Face Sharpener function either  automatically or manually.
1.Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that  case, only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to correct from the list  displayed in the lower part of the
Correct/Enhance Images window. 
The image appears in Preview.
Note
If only one image is selected, the thumbnail does n ot appear below Preview.
Auto Correction
3.Make sure that Auto is selected. Page 159 of 437 pages
Using the Face Sharpener Function
JownloadedhfromhManualsPrinterDcomhManuals     
						

							4.Click Face Sharpener.
Note
Effect levels can be changed using the slider below Face Sharpener.
5.Click OK. 
The face is sharpened and the 
 (Correction/Enhancement) mark appears on the upper  left of the
image.
Note
Click  (Compare) to display the images before and after t he correction side by side so that
you can compare and check the result.
Click Reset Selected Image to undo the correction o peration.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
Manual Correction
3.Click Manual, then click Correct/Enhance.
4.Click Face Sharpener.
Note
Effect levels can be changed using the slider below  Face Sharpener.
Move the cursor over the image. The shape of the cu rsor changes to  (Cross).
5.Drag to select the area you want to correct, then c lick OK that appears over the
image. Page 160 of 437 pages
Using the Face Sharpener Function
JownloadedhfromhManualsPrinterDcomhManuals