Canon Lbp 3300 User Guide

							Loading Paper in the Manual Feed Slot2-26
Loading and Outputting Paper
2
Loading Plain Paper, Heavy Paper, Transparency, or Label 
in the Manual Feed Slot
Load plain paper, heavy paper, transparency, or label in the manual feed slot using 
the following procedure.
Be sure to load plain paper, heavy paper, transparency, or label in portrait 
orientation when loading it in the manual feed slot.
IMPORTANT
•The manual feed slot can be loaded with only one sheet of paper.
•Make sure that the printer is not operating and the   (Ready) indicator (green) is on 
when loading paper in the manual feed slot. However, when printing multiple copies or 
multiple pages from the manual feed slot, make sure that the printer is not operating and 
the   (Load Paper) indicator (orange) is blinking before loading the second and 
subsequent paper. If paper is loaded in the manual feed slot while the printer is operating 
such as when the printer is printing or immediately after outputting paper, the loaded 
paper may be output without being printed, or this may result in paper jams.
 
						

							2-27
Loading and Outputting Paper
2
Loading Paper in the Manual Feed Slot
1Open the manual feed slot cover.
2Adjust the paper guides to the width of the loaded paper as 
shown in the figure.
The paper guides move together.
IMPORTANT
Be sure to align the paper guides with the width of the paper. If the paper guides 
are too loose or too tight, this may result in misfeeds or paper jams.
 
						

							Loading Paper in the Manual Feed Slot2-28
Loading and Outputting Paper
2
NOTE
To print letterhead paper or paper printed with a logo, load the paper so that the 
printing side is facing up, as shown in the following figure.
( : Feeding direction)
3Gently insert the paper until it touches the back of the printer 
while supporting the paper with hands as shown in the figure.
 
						

							2-29
Loading and Outputting Paper
2
Loading Paper in the Manual Feed Slot
When the paper is loaded, it is sent into the slot a little.
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
•Load the paper so that it is straight.
•If the paper is curled or folded at corners, flatten it before loading it in the printer.
Next, configure the printer driver (See p. 2-40).
Loading Index Card
Load Index Card in the manual feed slot using the following procedure.
When loading Index Card in the manual feed slot, be sure to load it in portrait 
orientation so that the printing side is facing up.
( : Feeding direction)
IMPORTANT
•The manual feed slot can be loaded with only one sheet of Index Card size paper.
•Make sure that the printer is not operating and the   (Ready) indicator (green) is on 
when loading Index Card in the manual feed slot. However, when printing multiple copies 
or multiple pages from the manual feed slot, make sure that the printer is not operating 
and the   (Load Paper) indicator (orange) is blinking before loading the second and 
subsequent Index Card size paper. If Index Card is loaded in the manual feed slot while 
the printer is operating such as when the printer is printing or immediately after outputting 
paper, the loaded Index Card may be output without being printed, or this may result in 
paper jams.
 
						

							Loading Paper in the Manual Feed Slot2-30
Loading and Outputting Paper
2
1Open the manual feed slot cover.
2Adjust the paper guides to the width of the loaded Index Card 
as shown in the figure.
The paper guides move together.
IMPORTANT
Be sure to align the paper guides with the width of the Index Card. If the paper 
guides are too loose or too tight, this may result in misfeeds or paper jams.
 
						

							2-31
Loading and Outputting Paper
2
Loading Paper in the Manual Feed Slot
3Gently insert the paper until it touches the back of the printer 
while supporting Index Card with hands as shown in the 
figure.
When the paper is loaded, it is sent into the slot a little.
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
•Load Index Card so that it is straight.
•If Index Card is curled, flatten the curls by warping it in the opposite direction before 
loading it.
Next, configure the printer driver (See p. 2-40).
 
						

							Loading Paper in the Manual Feed Slot2-32
Loading and Outputting Paper
2
Loading Envelope
Load an envelope in the manual feed slot using the following procedure.
When loading an envelope in the manual feed slot, be sure to load it in portrait 
orientation so that the printing side is facing up and the flap is toward the left of the 
printer when viewed from the front.
( : Feeding direction)
IMPORTANT
•The manual feed slot can be loaded with only one envelope.
•Make sure that the printer is not operating and the   (Ready) indicator (green) is on 
when loading an envelope in the manual feed slot. However, when printing multiple 
copies or multiple pages from the manual feed slot, make sure that the printer is not 
operating and the   (Load Paper) indicator (orange) is blinking before loading the 
second and subsequent envelopes. If an envelope is loaded in the manual feed slot while 
the printer is operating such as when the printer is printing or immediately after outputting 
paper, the loaded envelope may be output without being printed, or this may result in 
paper jams.
 
						

							2-33
Loading and Outputting Paper
2
Loading Paper in the Manual Feed Slot
1Open the manual feed slot cover.
2Adjust the paper guides to the width of the loaded envelope 
as shown in the figure.
The paper guides move together.
IMPORTANT
Be sure to align the paper guides with the width of the envelope. If the paper guides 
are too loose or too tight, this may result in misfeeds or paper jams.
 
						

							Loading Paper in the Manual Feed Slot2-34
Loading and Outputting Paper
2
3Gently insert the envelope until it touches the back of the 
printer while supporting the envelope with hands as shown in 
the figure.
When the envelope is loaded, it is sent into the slot a little.
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
Load the envelope so that it is straight.
Next, configure the printer driver (See p. 2-40).
 
						

							2-35
Loading and Outputting Paper
2
Loading Paper in the Manual Feed Slot
Loading Custom Size Paper (Non-Standard Paper)
Load custom size paper in the manual feed slot using the following procedure.
Be sure to load custom size paper in portrait orientation when loading it in the 
manual feed slot.
IMPORTANT
•The manual feed slot can be loaded with only one sheet of paper.
•Make sure that the printer is not operating and the   (Ready) indicator (green) is on 
when loading paper in the manual feed slot. However, when printing multiple copies or 
multiple pages from the manual feed slot, make sure that the printer is not operating and 
the   (Load Paper) indicator (orange) is blinking before loading the second and 
subsequent paper. If paper is loaded in the manual feed slot while the printer is operating 
such as when the printer is printing or immediately after outputting paper, the loaded 
paper may be output without being printed, or this may result in paper jams.
1Open the manual feed slot cover.