Canon Lbp 3300 User Guide
Have a look at the manual Canon Lbp 3300 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 138
3-33Installing the CAPT Software
Setting Up the Printing Environment
3
5Press of the power switch to turn the printer ON.
6Turn the computer on and start up Windows XP/Server 2003.
7Log on as a member of Administrators.
NOTE
Full Control Permission is required for the installation of the printer driver.
8Insert the supplied LBP3300 User Software CD-ROM into
the CD-ROM drive.
If CD-ROM Setup appears, click [Exit].
If the following screen is displayed
❑
Select [Install from a list or specific location...](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-137.png "Page 138
3-33Installing the CAPT Software
Setting Up the Printing Environment
3
5Press of the power switch to turn the printer ON.
6Turn the computer on and start up Windows XP/Server 2003.
7Log on as a member of Administrators.
NOTE
Full Control Permission is required for the installation of the printer driver.
8Insert the supplied LBP3300 User Software CD-ROM into
the CD-ROM drive.
If CD-ROM Setup appears, click [Exit].
If the following screen is displayed
❑
Select [Install from a list or specific location...")
![Page 139
3-34Installing the CAPT Software
Setting Up the Printing Environment
3
If the following screen is displayed
❑
Select [No, not this time], then click [Next].
❑Select [Install from a list or specific location (Advanced)], then click [Next].](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-138.png "Page 139
3-34Installing the CAPT Software
Setting Up the Printing Environment
3
If the following screen is displayed
❑
Select [No, not this time], then click [Next].
❑Select [Install from a list or specific location (Advanced)], then click [Next].")
![Page 140
3-35Installing the CAPT Software
Setting Up the Printing Environment
3
9Select [Search for the best driver in these locations.], clear the
[Search removable media (floppy, CD-ROM...)] check box, and
then select the [Include this location in the search] check box.
10Click [Browse], then select the folder.
Select [D:\English\Win2K_XP], then click [OK].
The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive
name may differ depending on the computer you are using.](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-139.png "Page 140
3-35Installing the CAPT Software
Setting Up the Printing Environment
3
9Select [Search for the best driver in these locations.], clear the
[Search removable media (floppy, CD-ROM...)] check box, and
then select the [Include this location in the search] check box.
10Click [Browse], then select the folder.
Select [D:\English\Win2K_XP], then click [OK].
The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive
name may differ depending on the computer you are using.")
![Page 141
3-36Installing the CAPT Software
Setting Up the Printing Environment
3
11Make sure that the folder to be browsed is displayed for
[Include this location in the search], and then click [Next].
The installation process is displayed.
NOTE
If the [Hardware Installation] dialog box appears, click [Continue Anyway].
12Click [Finish].
IMPORTANT
If you are using a computer with Windows XP Service Pack 2 or another operating
system equipped with Windows Firewall as the print server, you need to configure...](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-140.png "Page 141
3-36Installing the CAPT Software
Setting Up the Printing Environment
3
11Make sure that the folder to be browsed is displayed for
[Include this location in the search], and then click [Next].
The installation process is displayed.
NOTE
If the [Hardware Installation] dialog box appears, click [Continue Anyway].
12Click [Finish].
IMPORTANT
If you are using a computer with Windows XP Service Pack 2 or another operating
system equipped with Windows Firewall as the print server, you need to configure...")
![Page 142
3-37Installing the CAPT Software
Setting Up the Printing Environment
3
Installing from [Add Printer Wizard]
NOTE
When installing the CAPT software from [Add Printer Wizard], the USB port for
connecting this printer has to have already been registered.
For Windows 98/Me
The screen shots used in this section are from Windows Me.
1From the [Start] menu, select [Settings] [Printers] to open
the [Printers] folder. Then, double-click [Add Printer].
The [Add Printer Wizard] dialog box is displayed.
NOTE
The...](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-141.png "Page 142
3-37Installing the CAPT Software
Setting Up the Printing Environment
3
Installing from [Add Printer Wizard]
NOTE
When installing the CAPT software from [Add Printer Wizard], the USB port for
connecting this printer has to have already been registered.
For Windows 98/Me
The screen shots used in this section are from Windows Me.
1From the [Start] menu, select [Settings] [Printers] to open
the [Printers] folder. Then, double-click [Add Printer].
The [Add Printer Wizard] dialog box is displayed.
NOTE
The...")
![Page 143
3-38Installing the CAPT Software
Setting Up the Printing Environment
3
3Select [Local printer], then click [Next].
NOTE
This screen does not appear when the network settings have not been configured.
4Click [Have Disk].
5Insert the supplied LBP3300 User Software CD-ROM into
the CD-ROM drive, and then click [Browse].
If CD-ROM Setup appears, click [Exit].](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-142.png "Page 143
3-38Installing the CAPT Software
Setting Up the Printing Environment
3
3Select [Local printer], then click [Next].
NOTE
This screen does not appear when the network settings have not been configured.
4Click [Have Disk].
5Insert the supplied LBP3300 User Software CD-ROM into
the CD-ROM drive, and then click [Browse].
If CD-ROM Setup appears, click [Exit].")
![Page 144
3-39Installing the CAPT Software
Setting Up the Printing Environment
3
6Select [D:\English\Win98_Me], then click [OK].
The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive
name may differ depending on the computer you are using.
7Confirm the contents of [Copy manufacturers files from], then
click [OK].
For example, when your CD-ROM drive is drive [D:], it is displayed as
[D:\English\Win98_Me].
8Select the name of this printer for [Printers], then click [Next].](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-143.png "Page 144
3-39Installing the CAPT Software
Setting Up the Printing Environment
3
6Select [D:\English\Win98_Me], then click [OK].
The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive
name may differ depending on the computer you are using.
7Confirm the contents of [Copy manufacturers files from], then
click [OK].
For example, when your CD-ROM drive is drive [D:], it is displayed as
[D:\English\Win98_Me].
8Select the name of this printer for [Printers], then click [Next].")
![Page 145
3-40Installing the CAPT Software
Setting Up the Printing Environment
3
9Select the USB port for connecting this printer, and then click
[Next].
10Enter a new name in [Printer name] if you want to change the
printer name.
NOTE
If another printer driver has already been installed in the computer, the message
appears. In this case, select [Yes] or [No].
11Click [Finish].
Copying files is started.
12When the dialog box for completing the installation appears,
click [OK].
13If the printer and computer are...](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-144.png "Page 145
3-40Installing the CAPT Software
Setting Up the Printing Environment
3
9Select the USB port for connecting this printer, and then click
[Next].
10Enter a new name in [Printer name] if you want to change the
printer name.
NOTE
If another printer driver has already been installed in the computer, the message
appears. In this case, select [Yes] or [No].
11Click [Finish].
Copying files is started.
12When the dialog box for completing the installation appears,
click [OK].
13If the printer and computer are...")
![Page 146
3-41Installing the CAPT Software
Setting Up the Printing Environment
3
The installation of the printer driver is completed.
For Windows 2000
IMPORTANT
When printing a test page, make sure that the printer is properly connected to the
computer and the printer is ON before installing the CAPT software.
1Turn the computer on and start up Windows 2000.
2Log on as a member of Administrators.
IMPORTANT
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then
install the CAPT...](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-145.png "Page 146
3-41Installing the CAPT Software
Setting Up the Printing Environment
3
The installation of the printer driver is completed.
For Windows 2000
IMPORTANT
When printing a test page, make sure that the printer is properly connected to the
computer and the printer is ON before installing the CAPT software.
1Turn the computer on and start up Windows 2000.
2Log on as a member of Administrators.
IMPORTANT
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then
install the CAPT...")
3-36Installing the CAPT Software Setting Up the Printing Environment 3 11Make sure that the folder to be browsed is displayed for [Include this location in the search], and then click [Next]. The installation process is displayed. NOTE If the [Hardware Installation] dialog box appears, click [Continue Anyway]. 12Click [Finish]. IMPORTANT If you are using a computer with Windows XP Service Pack 2 or another operating system equipped with Windows Firewall as the print server, you need to configure Windows Firewall to unblock communication with the client computers. (See p. 8- 10) The installation of the USB class driver (supplied with an operating system) and the printer driver is completed.
3-37Installing the CAPT Software Setting Up the Printing Environment 3 Installing from [Add Printer Wizard] NOTE When installing the CAPT software from [Add Printer Wizard], the USB port for connecting this printer has to have already been registered. For Windows 98/Me The screen shots used in this section are from Windows Me. 1From the [Start] menu, select [Settings] [Printers] to open the [Printers] folder. Then, double-click [Add Printer]. The [Add Printer Wizard] dialog box is displayed. NOTE The [Add Printer Wizard] dialog box can also be displayed using the following procedure: - Double-click [My Computer] [Control Panel] [Printers] [Add Printer] (For Windows Me). - Double-click [My Computer] [Printers] [Add Printer] (For Windows 98). 2Click [Next].
3-38Installing the CAPT Software Setting Up the Printing Environment 3 3Select [Local printer], then click [Next]. NOTE This screen does not appear when the network settings have not been configured. 4Click [Have Disk]. 5Insert the supplied LBP3300 User Software CD-ROM into the CD-ROM drive, and then click [Browse]. If CD-ROM Setup appears, click [Exit].
3-39Installing the CAPT Software Setting Up the Printing Environment 3 6Select [D:\English\Win98_Me], then click [OK]. The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive name may differ depending on the computer you are using. 7Confirm the contents of [Copy manufacturers files from], then click [OK]. For example, when your CD-ROM drive is drive [D:], it is displayed as [D:\English\Win98_Me]. 8Select the name of this printer for [Printers], then click [Next].
3-40Installing the CAPT Software Setting Up the Printing Environment 3 9Select the USB port for connecting this printer, and then click [Next]. 10Enter a new name in [Printer name] if you want to change the printer name. NOTE If another printer driver has already been installed in the computer, the message appears. In this case, select [Yes] or [No]. 11Click [Finish]. Copying files is started. 12When the dialog box for completing the installation appears, click [OK]. 13If the printer and computer are not connected, turn the computer off, connect the computer and printer with a USB cable, and then turn them ON.
3-41Installing the CAPT Software Setting Up the Printing Environment 3 The installation of the printer driver is completed. For Windows 2000 IMPORTANT When printing a test page, make sure that the printer is properly connected to the computer and the printer is ON before installing the CAPT software. 1Turn the computer on and start up Windows 2000. 2Log on as a member of Administrators. IMPORTANT If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then install the CAPT software using this procedure. NOTE Full Control Permission is required for the installation of the printer driver. 3From the [Start] menu, select [Settings] [Printers] to open the [Printers] folder. Then, double-click [Add Printer]. 4Click [Next].
3-42Installing the CAPT Software Setting Up the Printing Environment 3 5Make sure that [Local printer] is selected, then click [Next]. NOTE Do not select the [Automatically detect and install my Plug and Play printer] check box. 6Select the USB port for connecting this printer, and then click [Next].
3-43Installing the CAPT Software Setting Up the Printing Environment 3 7Click [Have Disk]. 8Insert the supplied LBP3300 User Software CD-ROM into the CD-ROM drive, and then click [Browse]. If CD-ROM Setup appears, click [Exit]. 9Select [D:\English\Win2K_XP]. Select [CNAB5STK.INF], then click [Open]. The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive name may differ depending on the computer you are using.
3-44Installing the CAPT Software Setting Up the Printing Environment 3 10Confirm the contents of [Copy manufacturers files from], then click [OK]. For example, when your CD-ROM drive is drive [D:], it is displayed as [D:\English\Win2K_XP]. 11Click [Next]. 12Enter a new name in [Printer name] if you want to change the printer name, then click [Next].
3-45Installing the CAPT Software Setting Up the Printing Environment 3 NOTE If another printer driver has already been installed in the computer, the message appears. In this case, select [Yes] or [No]. 13Click [Next]. NOTE When sharing this printer on a network, select [Share as], and then click [Next]. The window for entering [Location] and [Comment] is displayed. Enter them as needed, then click [Next]. 14When printing a test page, click [Yes], then click [Next].