Canon Lbp 3300 User Guide
Have a look at the manual Canon Lbp 3300 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 116
3-11Installing the CAPT Software
Setting Up the Printing Environment
3
12Select the [Install Printer Driver through a USB Connection]
check box, then click [Next].
Depending on the system environment, a message that prompts you to restart the
computer may appear. In this case, restart the computer and continue the
installation.
If you are using Windows XP Service Pack 2 or another operating system
equipped with Windows Firewall, the following screen is displayed. Specify
whether to configure Windows...](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-115.png "Page 116
3-11Installing the CAPT Software
Setting Up the Printing Environment
3
12Select the [Install Printer Driver through a USB Connection]
check box, then click [Next].
Depending on the system environment, a message that prompts you to restart the
computer may appear. In this case, restart the computer and continue the
installation.
If you are using Windows XP Service Pack 2 or another operating system
equipped with Windows Firewall, the following screen is displayed. Specify
whether to configure Windows...")
![Page 117
3-12Installing the CAPT Software
Setting Up the Printing Environment
3
NOTE
•If you are using Windows 2000 and the [Digital Signature Not Found] dialog box
appears, click [Yes].
•If you are using Windows XP/Server 2003 and the [Hardware Installation] dialog
box appears, click [Continue Anyway].
14When the following screen is displayed, turn the printer ON.
Press of the power switch to turn the printer ON.
Installation of the USB class driver and the printer driver starts automatically.
NOTE
•If the...](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-116.png "Page 117
3-12Installing the CAPT Software
Setting Up the Printing Environment
3
NOTE
•If you are using Windows 2000 and the [Digital Signature Not Found] dialog box
appears, click [Yes].
•If you are using Windows XP/Server 2003 and the [Hardware Installation] dialog
box appears, click [Continue Anyway].
14When the following screen is displayed, turn the printer ON.
Press of the power switch to turn the printer ON.
Installation of the USB class driver and the printer driver starts automatically.
NOTE
•If the...")
![Page 118
3-13Installing the CAPT Software
Setting Up the Printing Environment
3
15The screen that informs you of the completion of the printer
driver installation is displayed. Click [Exit].
16If [Easy Installation] is selected in Step 7, the manuals are
installed.](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-117.png "Page 118
3-13Installing the CAPT Software
Setting Up the Printing Environment
3
15The screen that informs you of the completion of the printer
driver installation is displayed. Click [Exit].
16If [Easy Installation] is selected in Step 7, the manuals are
installed.")
![Page 119
3-14Installing the CAPT Software
Setting Up the Printing Environment
3
17Confirm the installation results, then click [Next].
NOTE
If the printer driver is not installed properly, see Installation Problems, on p. 7-38.
18Select the [Restart Computer Now (Recommended)] check
box, then click [Restart].
Windows restarts.
The installation of the USB class driver and the printer driver is completed.](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-118.png "Page 119
3-14Installing the CAPT Software
Setting Up the Printing Environment
3
17Confirm the installation results, then click [Next].
NOTE
If the printer driver is not installed properly, see Installation Problems, on p. 7-38.
18Select the [Restart Computer Now (Recommended)] check
box, then click [Restart].
Windows restarts.
The installation of the USB class driver and the printer driver is completed.")
![Page 122
3-17Installing the CAPT Software
Setting Up the Printing Environment
3
5Press of the power switch to turn the printer ON.
6Turn the computer on and start up Windows 98/Me.
The [Add New Hardware Wizard] dialog box appears.
For Windows Me
If the following dialog box appears, proceed to Step 7.
If the following dialog box appears, proceed to Step 14.](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-121.png "Page 122
3-17Installing the CAPT Software
Setting Up the Printing Environment
3
5Press of the power switch to turn the printer ON.
6Turn the computer on and start up Windows 98/Me.
The [Add New Hardware Wizard] dialog box appears.
For Windows Me
If the following dialog box appears, proceed to Step 7.
If the following dialog box appears, proceed to Step 14.")
![Page 123
3-18Installing the CAPT Software
Setting Up the Printing Environment
3
For Windows 98
If the following dialog box appears, click [Next], then proceed to Step 7.
If the following dialog box appears, click [Next], then proceed to Step 14.
7Select [Specify the location of the driver (Advanced)], then
click [Next].
For Windows 98: Select [Search for the best driver for your device.
(Recommended).], then click [Next].](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-122.png "Page 123
3-18Installing the CAPT Software
Setting Up the Printing Environment
3
For Windows 98
If the following dialog box appears, click [Next], then proceed to Step 7.
If the following dialog box appears, click [Next], then proceed to Step 14.
7Select [Specify the location of the driver (Advanced)], then
click [Next].
For Windows 98: Select [Search for the best driver for your device.
(Recommended).], then click [Next].")
![Page 124
3-19Installing the CAPT Software
Setting Up the Printing Environment
3
8Insert the supplied LBP3300 User Software CD-ROM into
the CD-ROM drive.
If CD-ROM Setup appears, click [Exit].
9Select [Search for the best driver for your device.
(Recommended).], clear the [Removable Media (Floppy, CD-
ROM...)] check box, and then select the [Specify a location]
check box.
For Windows 98: Clear the [Floppy disk drives] check box and the [CD-ROM
drives] check box, and then select the [Specify a location] check...](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-123.png "Page 124
3-19Installing the CAPT Software
Setting Up the Printing Environment
3
8Insert the supplied LBP3300 User Software CD-ROM into
the CD-ROM drive.
If CD-ROM Setup appears, click [Exit].
9Select [Search for the best driver for your device.
(Recommended).], clear the [Removable Media (Floppy, CD-
ROM...)] check box, and then select the [Specify a location]
check box.
For Windows 98: Clear the [Floppy disk drives] check box and the [CD-ROM
drives] check box, and then select the [Specify a location] check...")
![Page 125
3-20Installing the CAPT Software
Setting Up the Printing Environment
3
11Make sure that the folder to be browsed is displayed for
[Specify a location], and then click [Next].
12Click [Next].
Installation of the USB class driver starts.
13Click [Finish].
The printer is detected automatically. Please wait a moment.](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-124.png "Page 125
3-20Installing the CAPT Software
Setting Up the Printing Environment
3
11Make sure that the folder to be browsed is displayed for
[Specify a location], and then click [Next].
12Click [Next].
Installation of the USB class driver starts.
13Click [Finish].
The printer is detected automatically. Please wait a moment.")
![Page 126
3-21Installing the CAPT Software
Setting Up the Printing Environment
3
The [Add New Hardware Wizard] dialog box appears. For Windows 98, click
[Next].
14Select [Specify the location of the driver (Advanced)], then
click [Next].
For Windows 98: Select [Search for the best driver for your device.
(Recommended).], then click [Next].
15If the supplied LBP3300 User Software CD-ROM is not in the
CD-ROM drive, insert the LBP3300 User Software CD-ROM
into the CD-ROM drive.
If CD-ROM Setup appears, click...](http://img.usermanuals.tech/thumb/14/56536/w64_canon_lbp-3300-user-guide-125.png "Page 126
3-21Installing the CAPT Software
Setting Up the Printing Environment
3
The [Add New Hardware Wizard] dialog box appears. For Windows 98, click
[Next].
14Select [Specify the location of the driver (Advanced)], then
click [Next].
For Windows 98: Select [Search for the best driver for your device.
(Recommended).], then click [Next].
15If the supplied LBP3300 User Software CD-ROM is not in the
CD-ROM drive, insert the LBP3300 User Software CD-ROM
into the CD-ROM drive.
If CD-ROM Setup appears, click...")
3-16Installing the CAPT Software Setting Up the Printing Environment 3 3Connect the B-type (square) end of the USB cable to the USB connector on the printer, then close the expansion slot cover. 4Connect the A-type (flat) end of the USB cable to the USB port on the computer.
3-17Installing the CAPT Software Setting Up the Printing Environment 3 5Press of the power switch to turn the printer ON. 6Turn the computer on and start up Windows 98/Me. The [Add New Hardware Wizard] dialog box appears. For Windows Me If the following dialog box appears, proceed to Step 7. If the following dialog box appears, proceed to Step 14.
3-18Installing the CAPT Software Setting Up the Printing Environment 3 For Windows 98 If the following dialog box appears, click [Next], then proceed to Step 7. If the following dialog box appears, click [Next], then proceed to Step 14. 7Select [Specify the location of the driver (Advanced)], then click [Next]. For Windows 98: Select [Search for the best driver for your device. (Recommended).], then click [Next].
3-19Installing the CAPT Software Setting Up the Printing Environment 3 8Insert the supplied LBP3300 User Software CD-ROM into the CD-ROM drive. If CD-ROM Setup appears, click [Exit]. 9Select [Search for the best driver for your device. (Recommended).], clear the [Removable Media (Floppy, CD- ROM...)] check box, and then select the [Specify a location] check box. For Windows 98: Clear the [Floppy disk drives] check box and the [CD-ROM drives] check box, and then select the [Specify a location] check box. 10Click [Browse], then select the folder. For Windows Me: Select [D:\English\USBPORT\WinMe], and then click [OK]. For Windows 98: Select [D:\English\USBPORT\Win98], and then click [OK]. The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive name may differ depending on the computer you are using.
3-20Installing the CAPT Software Setting Up the Printing Environment 3 11Make sure that the folder to be browsed is displayed for [Specify a location], and then click [Next]. 12Click [Next]. Installation of the USB class driver starts. 13Click [Finish]. The printer is detected automatically. Please wait a moment.
3-21Installing the CAPT Software Setting Up the Printing Environment 3 The [Add New Hardware Wizard] dialog box appears. For Windows 98, click [Next]. 14Select [Specify the location of the driver (Advanced)], then click [Next]. For Windows 98: Select [Search for the best driver for your device. (Recommended).], then click [Next]. 15If the supplied LBP3300 User Software CD-ROM is not in the CD-ROM drive, insert the LBP3300 User Software CD-ROM into the CD-ROM drive. If CD-ROM Setup appears, click [Exit].
3-22Installing the CAPT Software Setting Up the Printing Environment 3 16Select [Search for the best driver for your device. (Recommended).], clear the [Removable Media (Floppy, CD- ROM...)] check box, and then select the [Specify a location] check box. For Windows 98: Clear the [Floppy disk drives] check box and the [CD-ROM drives] check box, then select the [Specify a location] check box. 17Click [Browse], then select the folder. Select [D:\English\Win98_Me], then click [OK]. The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive name may differ depending on the computer you are using.
3-23Installing the CAPT Software Setting Up the Printing Environment 3 18Make sure that the folder to be browsed is displayed for [Specify a location], and then click [Next]. 19Click [Next]. 20Enter a new name in [Printer name] if you want to change the printer name. NOTE If another printer driver has already been installed in the computer, the message appears. In this case, select [Yes] or [No].
3-24Installing the CAPT Software Setting Up the Printing Environment 3 21Click [Finish]. Copying files is started. 22When the dialog box for completing the installation appears, click [OK]. 23Click [Finish]. The installation of the USB class driver and the printer driver is completed.
3-25Installing the CAPT Software Setting Up the Printing Environment 3 For Windows 2000 1Make sure that the printer and computer are OFF. 2Open the expansion slot cover.