Asus Vh226s Quick Start Guide

							
Table of content 
 
						

							
 Quck Start Gude
ASUS contact information
ASUSTeK COMPUTER INC.
Address  15 L-Te Road, Petou, Tape, Tawan 11259Telephone    +886-2-2894-3447Fax     +886-2-2890-7798E-mal    [email protected] ste  www.asus.com.tw
Technical SupportTelephone    +86-21-38429911Onlne support   support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address   44370 Nobel Drve, Fremont, CA 94538, USAFax     +1-510-608-4555Web ste   usa.asus.com
Technical Support
Telephone    +1-812-282-2787Support fax   +1-812-284-0883Onlne support   support.asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address	 	 Harkort	Str.	21-23,	D-40880	Ratingen,	GermanyTelephone  +49-2102-95990Fax     +49-2102-959911Web ste   www.asus.deOnlne contact   www.asus.de/sales
Technical Support
Telephone   +49-1805-010923Support Fax   +49-2102-9599-11Onlne support   support.asus.com
Downloaded from ManualMontor.com Manuals 
						

							Quick Start Guide 1
English
VH226 Series
LCD Monitor
Quick Start Guide
VH226-EN-QSG.fm  Page 1  Friday, August 22, 2008  5:26 PM
Downloaded from ManualMonitor.com Manualr 
						

							Quick Start Guide 2
English
Safety information
• Before setting up the monitor, carefully read all the documentation that came with 
the package.
• To prevent fire or shock hazard, never expose the monitor to rain or moisture.
• The monitor should be operated only from the type of power source indicated on 
the label. If you are not sure of the type of power supplied to your home, consult 
your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• To ensure satisfactory operation, use the monitor only with UL listed computers 
which have appropriate configured receptacles marked between 100-240V AC.
• If you encounter technical problems with the monitor, contact a qualified service 
technician or your retailer.
Monitor introduction
Front view
1. , ,  button
• Selects a desired video preset mode. (, )
• Exits the OSD menu or goes back to the previous menu. (, )
• Automatically adjusts the image to its optimized position, clock, and phase by pressing this button 
for 2-4 seconds (for VGA mode only). (
, )
2.  button• Increases values or moves your selection right/up.
• Volume hotkey
3.  button• Turns on the OSD menu. Enacts the selected OSD menu item.
4.  button• Decreases values or moves your selection left/down.
• Brightness hotkey
5.  button• Selects an available input source.
6.  Power button/Power indicator
1
4
3
2
1
6
1
2
3
4
5
6
Base(VH226H) (VH226S)
Press   (Input Select button) to display the HDMI signal after you connect an HDMI cable to your monitor.
VH226-EN-QSG.fm  Page 2  Friday, August 22, 2008  5:26 PM
Downloaded from ManualMonitor.com Manualr 
						

							Quick Start Guide 3
English
Rear view
Assembling the monitor base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Connect the base with the arm according to the drawing below. A click shows 
that the base has been connected successfully. 1. AC-in port
2. Earphone jack
3. Audio-in port
4. HDMI port
5. DVI port
6. VGA port
HDMI VGA
1
Kensington anti-
theft lock slotStereo 
speakerStereo 
speaker
Screw holes for 
VESA Wall Mount
Rear connectors
(VH226H) (VH226S)
23456136
We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
VH226-EN-QSG.fm  Page 3  Friday, August 22, 2008  5:26 PM
Downloaded from ManualMonitor.com Manualr 
						

							Quick Start Guide 4
English
Connecting the cables
1. Connect the cables according to the following instructions:
•To connect the audio cable: connect one end of the audio cable to the monitors 
Audio-in port, the other end to the computers audio-out port. 
•To connect the power cord: connect one end of the power cord securely to the 
monitors AC input port, the other end to a power outlet.
•To connect the VGA/DVI/HDMI cable:
a. Plug the VGA/DVI/HDMI connector to the LCD monitors VGA/DVI/HDMI port.
b. Connect the other end of the VGA/DVI/HDMI cable to your computers VGA/DVI/HDMI port.
c. Tighten the two screws to secure the VGA/DVI connector.
•To use earphones: connect the end with plug type to the monitors earphone 
jack.
2. Gather all the cables with the cable management slot.
Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the monitor, 
then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitors angle from -5° to 20°.
VGA Audio-in Earphone jack HDMIVGA Audio-in
(VH226H) (VH226S)
• When these cables are connected, you can choose the desired signal from the Input Select item 
in the OSD menu.
• The HDMI cable is purchased separately.
HDMI VGACable 
management slot
-5° to 20°
VH226-EN-QSG.fm  Page 4  Friday, August 22, 2008  5:26 PM
Downloaded from ManualMonitor.com Manualr 
						

							Quick Start Guide 5
English
Troubleshooting (FAQ)
ProblemPossible Solution
Power LED is not ON
• Press the   button to check if the monitor is in 
the ON mode.
• Check if the power cord is properly connected to 
the monitor and the power outlet.
The power LED lights amber and there is no screen 
image• Check if the monitor and the computer are in the 
ON mode.
• Make sure the signal cable is properly 
connected to the monitor and the computer.
• Inspect the signal cable and make sure none of 
the pins are bent.
• Connect the computer with another available 
monitor to check if the computer is properly 
working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via 
OSD.
Screen image is not centered or sized properly
• Press the   or   button for two 
seconds to automatically adjust the image. (for 
VGA mode only)
• Adjust the H-Position or V-Position settings via 
OSD.
Screen image bounces or a wave pattern is present 
in the image• Make sure the signal cable is properly 
connected to the monitor and the computer.
• Move electrical devices that may cause 
electrical interference.
Screen image has color defects (white does not look 
white)• Inspect the signal cable and make sure that 
none of the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the 
Color Temperature via OSD.
Screen image is blurry or fuzzy
• Press the   or   button for two 
seconds to automatically adjust the image. (for 
VGA mode only)
• Adjust the Phase and Clock settings via OSD.
No sound or sound is low • Ensure that the audio cable is properly 
connected to the monitor and the computer.
• Adjust the volume settings of both your monitor 
and computer.
• Ensure that the computer sound card driver is 
properly installed and activated.
VH226-EN-QSG.fm  Page 5  Friday, August 22, 2008  5:26 PM
Downloaded from ManualMonitor.com Manualr 
						

							Quick Start Guide 6
English
Supported operating modes
*Modes not listed in the table may not be supported. For optimal resolution, we recommend that you choose 
a mode listed in the table above.
**This monitor supports full HD (480i/p, 576i/p, 720p, 1080i/p) video contents from game consoles, DVD 
players and other consumer video devices.
Resolution FrequencyHorizontal Frequency 
(KHz)Vertical Frequency 
(Hz)Pixel 
(MHz)
720 x 400 31.47 70.08 28.32
640 x 480 31.47 59.94 25.18
640 x 480 35.00 66.66 30.24
640 x 480 37.87 72.82 31.50
640 x 480 37.50 75.00 31.50
800 x 600 35.16 56.25 36.00
800 x 600 37.88 60.32 40.00
800 x 600 48.08 72.12 50.00
800 x 600 46.86 75.00 49.50
832 x 624 49.72 74.55 57.28
1024 x 768 48.36 60.00 65.00
1024 x 768 56.476 70.069 75.00
1024 x 768 60.02 75.00 78.75
1152 x 864 67.50 75.00 108.00
1280 x 960 60.00 60.00 108.00
1280 x 1024 63.98 60.02 108.00
1280 x 1024 79.98 75.02 135.00
1366 x 768 47.712 59.79 85.50
1440 x 900 55.94 59.89 106.50
1600 x 1200 75.00 60.00 162.00
1680 x 1050 65.29 60.00 146.25
1920 x 1080 (Primary) 67.50 60.00 148.50
VH226-EN-QSG.fm  Page 6  Friday, August 22, 2008  5:26 PM
Downloaded from ManualMonitor.com Manualr 
						

							Guide de démarrage rapide 7
Français
Moniteur LCD
Série VH226
Guide de démarrage 
rapide
VH226-FR-QSG.fm  Page 7  Wednesday, August 20, 2008  11:27 AM
 
						

							Guide de démarrage rapide 8
Français
Informations de sécurité
• Avant d’installer le moniteur, lisez attentivement toute la documentation qui 
accompagne la boîte.
• Pour réduire le risque d’incendie ou de choc électrique, n’exposez jamais le 
moniteur à la pluie ou à l’humidité.
• Le moniteur ne doit être utilisé quavec le type dalimentation indiqué sur 
létiquette. Si vous nêtes pas sûr de votre type dalimentation, consultez votre 
revendeur ou la compagnie délectricité locale.
• Utilisez la prise électrique appropriée qui est conforme aux normes électriques 
locales.
• Pour assurer un fonctionnement satisfaisant, n’utilisez le moniteur qu’avec des 
ordinateurs listés UL qui possèdent des réceptacles configurés appropriés 
marqués entre 100-240V ca.
• Si vous rencontrez des problèmes techniques avec le moniteur, contactez un 
technicien de réparation qualifié ou votre revendeur.
Présentation du moniteur
Vue de devant
1. , ,  bouton
• Sélectionne le mode vidéo préréglé désiré. (, )
• Quitte le menu OSD ou retourne au menu précédent. (, )
• Ajuste automatiquement l’image à sa position optimale, ainsi que l’heure et la phase, lorsque 
vous appuyez sur ce bouton pendant 2-4 secondes (mode VGA seulement). (
, )
2.  bouton• Augmente les valeurs ou déplace la sélection vers la droite/haut.
• Touche de raccourci Volume
3.  bouton• Ouvre le menu OSD. Utilise lélément du menu OSD sélectionné.
4.  bouton• Baisse les valeurs ou déplace la sélection vers la gauche/bas.
• Touche de raccourci Luminosité
5.  bouton• Sélectionne une source d’entrée disponible.
6.  Bouton d’alimentation / Témoin d’alimentation
1
4
3
2
1
6
1
2
3
4
5
6
Base(VH226H) (VH226S)
Appuyez sur   (Bouton de sélection de l’entrée) pour afficher le signal HDMI après avoir branché le câble HDMI sur votre moniteur.
VH226-FR-QSG.fm  Page 8  Wednesday, August 20, 2008  11:27 AM