Xerox WorkCentre PE120i User Manual

Copying5.7
5
Setting Copy Options
The buttons on the control panel let you select all basic copy 
options: darkness, document type, copy size, and number of 
copies. Set the following options for the current copy job before 
pressing
 Start to make copies.
NOTE: If you press Stop/Clear while setting the copy options, all 
of the options you have set for the current copy job will be 
canceled and returned to their default status. Or, they will 
automatically return to their default status after the...

Copying5.8
Reduced/Enlarged Copy
Using the Reduce/Enlarge button, you can reduce or enlarge 
the size of a copied image from 25% to 400% when you copy 
original documents from the document glass or from 25% to 
100% from the ADF. Note that the zoom rate available is 
different depending on the document loading method.
To select from the predefined copy sizes:
1Press Reduce/Enlarge. 
The default setting appears on the bottom line of the 
display.
2Press Reduce/Enlarge or the scroll button (W or X) to...

Copying5.9
5
Number of Copies
Using the No. of Copies button, you can select the number of 
copies from 1 to 99. 
1Press No. of Copies.
2Press the scroll button (W or X) until the number you want 
appears on the display.
Pressing and holding the button allows you to quickly scroll 
to the number you want.
You can also enter the value using the number keypad.
3Press Enter to save the selection.
Using Special Copy Features
You can use the following copy features using the More 
Features
 button on the...

Copying5.10
Clone Copying
This special copy feature can be applied only when you place a 
document on the document glass. If a document is detected in 
the ADF, Clone copying feature does not work.
1Place the document to be copied on the document glass, 
and close the cover. 
2Press More Features. 
3Press More Features or the scroll button (W or X) until 
“Clone” displays on the bottom line.
4Press Enter to make your selection.
5If necessary, customize the copy settings, including 
number of copies,...

Copying5.11
5
Auto Fit Copying
This special copy feature can be applied only when you place a 
document on the document glass. If a document is detected in 
the ADF, Auto Fit copying does not work.
1Place the document to be copied on the document glass, 
and close the cover. 
2Press More Features. 
3Press More Features or the scroll button (W or X) until 
“Auto Fit” appears on the bottom line.
4Press Enter to make your selection.
5If necessary, customize the copy settings, including 
number of copies,...

Copying5.12
3Press More Features or the scroll button (W or X) until  “2 
sides in 1pg” displays on the bottom line.
4Press Enter to make your selection.
5If necessary, customize the copy settings, including 
number of copies, darkness, and original type, by using the 
control panel buttons. See “Setting Copy Options” on 
page 5.7.
6Press Start to begin copying.
Your machine begins scanning the front side.
7When “Set Backside” displays on the bottom line, open the 
document cover and flip the document...

Copying5.13
5
Poster Copying
This special copy feature can be applied only when you place a 
document on the document glass. If a document is detected in 
the ADF, the Poster copying feature does not work.
1Place the document to be copied on the document glass 
and close the cover.
2Press More Features. 
3Press More Features or the scroll button (W or X) until 
“Poster” displays on the bottom line.
4Press Enter to make your selection.
5If necessary, customize the copy settings, including 
number of...

Copying5.14
Changing the Default Settings
The copy options, including darkness, original type, copy size, 
and number of copies, can be set to the most frequently used 
modes. When you copy a document, the default settings are 
used unless they are changed by using the corresponding 
buttons on the control panel.
To create your own default settings:
1Press Menu on the control panel until “Copy Setup” 
appears on the top line of the display. 
The first menu item, “Default-Change,” appears on the 
bottom...

Copying5.15
5
Setting the Time Out Option
You can set the time the machine waits before it restores the 
default copy settings, if you do not start copying after changing 
them on the control panel.
1Press Menu on the control panel until “Copy Setup” 
appears on the top line of the display. 
2Press the scroll button (W or X) to display “Timeout” on the 
bottom line.
3Press Enter to access the menu item.
4Press the scroll button (W or X) until the status you want 
appears on the display.
You can select...

Copying5.16
MEMO
Downloaded From ManualsPrinter.com Manuals