Xerox WorkCentre M118i User Manual
Here you can view all the pages of manual Xerox WorkCentre M118i User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
Auditron Administration
Xerox CopyCentre/WorkCentre 118 User Guide 131
5.Press the button. When the entered code was not correct, re-enter the
appropriate code again.
6.Select [OK] to change the country code.
7.Reboot the machine to activate the settings.
Millimeters/Inches
Use this feature to change the unit of paper size displayed in the third screen, [Variable
Size] screen, of the [Paper Size] screens. For more information, refer to [Paper Size]
screen in the Copy chapter on page 55....](http://img.usermanuals.tech/thumb/82/38144/w300_Xerox_WorkCentre_M118i-130.png "Page 131
Auditron Administration
Xerox CopyCentre/WorkCentre 118 User Guide 131
5.Press the button. When the entered code was not correct, re-enter the
appropriate code again.
6.Select [OK] to change the country code.
7.Reboot the machine to activate the settings.
Millimeters/Inches
Use this feature to change the unit of paper size displayed in the third screen, [Variable
Size] screen, of the [Paper Size] screens. For more information, refer to [Paper Size]
screen in the Copy chapter on page 55....")
Auditron Administration Xerox CopyCentre/WorkCentre 118 User Guide 131 5.Press the button. When the entered code was not correct, re-enter the appropriate code again. 6.Select [OK] to change the country code. 7.Reboot the machine to activate the settings. Millimeters/Inches Use this feature to change the unit of paper size displayed in the third screen, [Variable Size] screen, of the [Paper Size] screens. For more information, refer to [Paper Size] screen in the Copy chapter on page 55....
Page 132
![Page 132
9 Setups
132 Xerox CopyCentre/WorkCentre 118 User Guide
NOTE: To enable the Auditron feature for the printer, you need to change the setting
of [Auditron (Print)] using CentreWare Internet Services. For how to change the
setting, refer to Auditron (Print) in the CentreWare Internet Services chapter on
page 105.
1.Select [Auditron Admin.] on the [System
Settings] screen using the
button.
2.Press the button.
3.Select the required option using the buttons.
4.Press the button.
Auditron Mode...](http://img.usermanuals.tech/thumb/82/38144/w300_Xerox_WorkCentre_M118i-131.png "Page 132
9 Setups
132 Xerox CopyCentre/WorkCentre 118 User Guide
NOTE: To enable the Auditron feature for the printer, you need to change the setting
of [Auditron (Print)] using CentreWare Internet Services. For how to change the
setting, refer to Auditron (Print) in the CentreWare Internet Services chapter on
page 105.
1.Select [Auditron Admin.] on the [System
Settings] screen using the
button.
2.Press the button.
3.Select the required option using the buttons.
4.Press the button.
Auditron Mode...")
9 Setups 132 Xerox CopyCentre/WorkCentre 118 User Guide NOTE: To enable the Auditron feature for the printer, you need to change the setting of [Auditron (Print)] using CentreWare Internet Services. For how to change the setting, refer to Auditron (Print) in the CentreWare Internet Services chapter on page 105. 1.Select [Auditron Admin.] on the [System Settings] screen using the button. 2.Press the button. 3.Select the required option using the buttons. 4.Press the button. Auditron Mode...
Page 133
Copy Settings Xerox CopyCentre/WorkCentre 118 User Guide 133 Delete Deletes the selected account. Change Password Changes the password for the selected account. Change Account Limit Changes the upper limit imposed on the number of prints allowed for the selected account. However, if “0” is selected, no limit is imposed. Reset Impressions Resets the total number of prints counted for the selected account. Copy Settings Refer to the following pages for the procedures for copy settings, which includes...
Page 134
![Page 134
9 Setups
134 Xerox CopyCentre/WorkCentre 118 User Guide
Original Type
Use this feature to adjust the density when [Lighten/Darken] is set to [Auto] for copying
documents, or to specify the default density for copying documents.
Text
Use this option to copy documents that contain text only.
Text & Photo
Use this option to copy documents with a mixture of text and photographs.
Photo
Use this option to copy documents that contain photographs only.
Lighten/Darken
Use this feature to adjust the density when...](http://img.usermanuals.tech/thumb/82/38144/w300_Xerox_WorkCentre_M118i-133.png "Page 134
9 Setups
134 Xerox CopyCentre/WorkCentre 118 User Guide
Original Type
Use this feature to adjust the density when [Lighten/Darken] is set to [Auto] for copying
documents, or to specify the default density for copying documents.
Text
Use this option to copy documents that contain text only.
Text & Photo
Use this option to copy documents with a mixture of text and photographs.
Photo
Use this option to copy documents that contain photographs only.
Lighten/Darken
Use this feature to adjust the density when...")
9 Setups 134 Xerox CopyCentre/WorkCentre 118 User Guide Original Type Use this feature to adjust the density when [Lighten/Darken] is set to [Auto] for copying documents, or to specify the default density for copying documents. Text Use this option to copy documents that contain text only. Text & Photo Use this option to copy documents with a mixture of text and photographs. Photo Use this option to copy documents that contain photographs only. Lighten/Darken Use this feature to adjust the density when...
Page 135
Copy Settings Xerox CopyCentre/WorkCentre 118 User Guide 135 Reduce/Enlarge Use this feature to configure the default settings for the reduction/enlargement ratio for copying. Default % Select the default reduction/enlargement ratio. Custom % Allows you to specify a reduction/enlargement ratio as a preset. Specify the required ratio using the or button. If a value is entered in error, press the button to clear the entered value, and then enter the reduction or enlargement ratio using the numeric...
Page 136
![Page 136
9 Setups
136 Xerox CopyCentre/WorkCentre 118 User Guide
Auto
Automatically applies either [Collated] or [Uncollated] for sorting copy output. The
[Collated] option is applied when you use the document feeder. When you use the
document glass, [Uncollated] is applied.
Collated
Delivers the specified number of copy sets in the same order as the documents.
Uncollated
Delivers the copies in stacks based on the number of copies requested for each
document.
Paper Type
Specify the paper type to be loaded in...](http://img.usermanuals.tech/thumb/82/38144/w300_Xerox_WorkCentre_M118i-135.png "Page 136
9 Setups
136 Xerox CopyCentre/WorkCentre 118 User Guide
Auto
Automatically applies either [Collated] or [Uncollated] for sorting copy output. The
[Collated] option is applied when you use the document feeder. When you use the
document glass, [Uncollated] is applied.
Collated
Delivers the specified number of copy sets in the same order as the documents.
Uncollated
Delivers the copies in stacks based on the number of copies requested for each
document.
Paper Type
Specify the paper type to be loaded in...")
9 Setups 136 Xerox CopyCentre/WorkCentre 118 User Guide Auto Automatically applies either [Collated] or [Uncollated] for sorting copy output. The [Collated] option is applied when you use the document feeder. When you use the document glass, [Uncollated] is applied. Collated Delivers the specified number of copy sets in the same order as the documents. Uncollated Delivers the copies in stacks based on the number of copies requested for each document. Paper Type Specify the paper type to be loaded in...
Page 137
![Page 137
Print Settings
Xerox CopyCentre/WorkCentre 118 User Guide 137
Customize Screens
Use this feature to rearrange the locations of menu items on the Copy screen. After
selecting [Customize Screens], select the item you want to rearrange using the
button, and then select the new locations pressing the or button.
Print Settings
This section describes how to specify settings for the printer feature. For more
information, refer to the following.
Network/Port – page 137
System Settings – page 142
Printer...](http://img.usermanuals.tech/thumb/82/38144/w300_Xerox_WorkCentre_M118i-136.png "Page 137
Print Settings
Xerox CopyCentre/WorkCentre 118 User Guide 137
Customize Screens
Use this feature to rearrange the locations of menu items on the Copy screen. After
selecting [Customize Screens], select the item you want to rearrange using the
button, and then select the new locations pressing the or button.
Print Settings
This section describes how to specify settings for the printer feature. For more
information, refer to the following.
Network/Port – page 137
System Settings – page 142
Printer...")
Print Settings Xerox CopyCentre/WorkCentre 118 User Guide 137 Customize Screens Use this feature to rearrange the locations of menu items on the Copy screen. After selecting [Customize Screens], select the item you want to rearrange using the button, and then select the new locations pressing the or button. Print Settings This section describes how to specify settings for the printer feature. For more information, refer to the following. Network/Port – page 137 System Settings – page 142 Printer...
Page 138
![Page 138
9 Setups
138 Xerox CopyCentre/WorkCentre 118 User Guide
Parallel
Use to set up parallel interface.
• Port Status – Specify whether to [Enable] or [Disable] the port status of parallel
interface.
• Print Mode – Specify the method used to process print data (applied print language).
When [Auto] is selected, the machine automatically detects the print language of the
data received and interprets and prints the data correctly. When [PCL] or [PS] is
selected, the data received from PC is processed as...](http://img.usermanuals.tech/thumb/82/38144/w300_Xerox_WorkCentre_M118i-137.png "Page 138
9 Setups
138 Xerox CopyCentre/WorkCentre 118 User Guide
Parallel
Use to set up parallel interface.
• Port Status – Specify whether to [Enable] or [Disable] the port status of parallel
interface.
• Print Mode – Specify the method used to process print data (applied print language).
When [Auto] is selected, the machine automatically detects the print language of the
data received and interprets and prints the data correctly. When [PCL] or [PS] is
selected, the data received from PC is processed as...")
9 Setups 138 Xerox CopyCentre/WorkCentre 118 User Guide Parallel Use to set up parallel interface. • Port Status – Specify whether to [Enable] or [Disable] the port status of parallel interface. • Print Mode – Specify the method used to process print data (applied print language). When [Auto] is selected, the machine automatically detects the print language of the data received and interprets and prints the data correctly. When [PCL] or [PS] is selected, the data received from PC is processed as...
Page 139
![Page 139
Print Settings
Xerox CopyCentre/WorkCentre 118 User Guide 139
• Port Status – Specify whether to [Enable] or [Disable] the port status of NetWare.
• Transport Protocol – Specify the transport protocol to be used for NetWare. Select
[TCP/IP], [IPX/SPX], or both.
• Print Mode - Specify the method used to process print data (applied print language).
When [Auto] is selected, the machine automatically detects the print language of the
data received, then interprets and prints the data correctly. When...](http://img.usermanuals.tech/thumb/82/38144/w300_Xerox_WorkCentre_M118i-138.png "Page 139
Print Settings
Xerox CopyCentre/WorkCentre 118 User Guide 139
• Port Status – Specify whether to [Enable] or [Disable] the port status of NetWare.
• Transport Protocol – Specify the transport protocol to be used for NetWare. Select
[TCP/IP], [IPX/SPX], or both.
• Print Mode - Specify the method used to process print data (applied print language).
When [Auto] is selected, the machine automatically detects the print language of the
data received, then interprets and prints the data correctly. When...")
Print Settings Xerox CopyCentre/WorkCentre 118 User Guide 139 • Port Status – Specify whether to [Enable] or [Disable] the port status of NetWare. • Transport Protocol – Specify the transport protocol to be used for NetWare. Select [TCP/IP], [IPX/SPX], or both. • Print Mode - Specify the method used to process print data (applied print language). When [Auto] is selected, the machine automatically detects the print language of the data received, then interprets and prints the data correctly. When...
Page 140
9 Setups 140 Xerox CopyCentre/WorkCentre 118 User Guide • Access Control – Specify whether to enable or disable the access control when stopping or deleting the print job. • DNS – Specify whether or not to use the name registered in DNS when recognizing the machine. • Add Port No. – Specify the port number 0, 80, or within the range of 8000 to 9999. • Connection Time-Out – Specify the period of time the machine fails to receive or send data before connection time-out is activated. Connection time-out...