Vodavi Starplus Triad S Description Manual

 IDIGITAL STATION OPERATION
Meet Me PageMeet Me Page
To request another party to meet you on a page:
1Dial the desired 2-digit or 3-digit paging code,
orPress pre-programmed* PAGING button.
2Request that party meet you on the page.
3Do not hang up, wait for the requested party to answer. As soon as the paged party
answers and is connected to you, the page circuit releases.
Answering a Meet Me Page
+Go to the nearest telephone and dial [77] on the dial pad,or
Press the pre-programmed* MEET ME PAGE ANSWER...

 I  ...
5-56
.. ..:.DIGITAL STATION OPERATION
Mute Key
Mute Key
The MUTE button provides privacy during speakerphone or handset operation by disabling the microphone.
1Press the MUTE button while off-hook on speakerphone or handset to activate.
2Press the MUTE button again to deactivate.
The mute feature automatically deactivates upon call termination.
Night Service Feature
The Night Service feature [604] will provide a means to put the system in night mode from any keyset or
remove the system from night...

DIGITAL STATION OPERATION
Off -Hook Voice Over (OHVO)*A Flex Button must be programmed for this feature to operate. Refer to Table53;FZex Button Progwnming
Codes.
F-T.. 1::Off -Hook Voice Over (OHVO).y:>;.
This feature enables users, off-hook on a call (CO or Intercom), receive a voice announcement through the
handset receiver without interrupting the existing call. The Voice Over is muted so it does not override or
drown out the existing conversation. The overridden party may then talk to the calling...

 I5-58DIGITAL STATION OPERATION
Off -Hook Voice Over (OHVO)
to respond to the voice over announcement without being released from the current call, (i.e. by
pressing a flex button pre-programmed for the message IN MEETING), the calling station receives
this message on the LCD display
Option 3: The OHVO receiving station may respond to the calling OHVO station by using the Camp-
On feature. The OHVO receiving station presses the flashing HOLD button to consult with the calling
station, The existing call...

 ,  .:-DIGITAL STATION OPERATION
One-Touch Recording
g*The called station may send a message, and then press MUTE to talk to the calling station. Each time
a message is sent, the splash tone is heard and both displays are updated.
9LEDs follow Camp-On LED lamp sequences.
QOHVO will not function if the busy station is in the Group Listening Mode.
One-Touch Recording
This feature lets the station user, while on an internal/external call, press a button to have the system record
the conversation into the...

5-60DIGITAL STATION OPERATIONOutside Call - Answer
If no VM port is available when the station user wants to record, the user receives the following
display (lasts six seconds):RECORDING UNAVAILABLE
MMM DD YY
oo:oo:oo
The user may retry after the display extinguishes.
In the recording mode, pressing the CONF button lets the user add members to the recording
(conference). Normal conference operation/conditions apply.
If an internal station is being recorded, the internal station receives a CONFERENCE LCD...

DIGITAL STATION OPERATIONOutside Call - Place
Outside Call - Place
1Press outside line or Pool button. ON/OFF button LED lights and dial tone is heard.
2Dial the desired party.
3When called party answers, lift handset to converse or use speakerphone.
Station user may also dial the individual trunk group access code to access an outside line.
Outside Call - Place on Hold
1If your system is programmed for Exclusive Hold Preference, press HOLD button once
for Exclusive Hold and twice for System Hold.
2If...

 I  .. ..-.5-62DIGITAL STATION OPERATION
Park - Personal
Stations off -book or in DAD do not hear the internal page announcement.
When making a zone page or 
All Call page and the zone is busy, the page
initiator receives ring back tone until the zone becomes available. You then
hear a warning tone and can make the page announcement.
External paging requires op 
tiond hardware.
*AFlexButton must be programmed for this feature to operate. Refer to Table53:FZexButton Programming
Codes.
Park - Personal
Each...

 I:: :.DIGITAL STATION OPERATION
PBX/Centrex Transfer5-63
station are ringing), and the attendant recall timer is initiated. When the attendant recall timer
expires, the CO call is disconnected.
.-w-.c;~s:PBX/Centrex Transfer-

5-64DIGITAL STATION OPERATIONPersonalized Messages
Messages - Custom
Each station can select from ten possible custom messages to display on the LCD of a key telephone calling
that station. These messages are programmed from the first attendant station.
1Dial [633] on the dial pad,
Of
Press a pre-programmed* MSG button.
2Dial the 2-digit code (21-30) for the desired custom message. The first attendant
should provide a list of messages to each station user.
Conditions:
9This feature is not available to...