Vodavi Starplus Triad S Description Manual

DIGITAL STATION OPERATIONCall Forward5-25
Off -Net (via speed dial)
This feature allows stations to forward intercom and transferred CO calls to an off-net location,
g=3 ~In a speed dial bin, store the number of the off-net location where to forward calls. Follow instructions provided
-Z’SU,?for storing station or system speed dial numbers.
1Lift handset or press ON/OFF button,
2Press the FWD button or dial 
[640].3Dial 
[*] on the dial pad. Dial the 2-digit speed bin number (00-19, 20-99) that contains...

5-26DIGITAL STATION OPERATIONCaller ID Name/Number Option
Station
When any type of station call forwarding is invoked, the LCD display normally indicates the call forwarding
mode at all times. This feature changes the LCD forwarding display to make the call forwarding mode
display optional. This feature is enabled/disabled in admin programming on a system-wide basis.
Caller ID Name/Number Option
This feature lets a station user program a flexible button to view the number and name on the LCD when...

:DIGITAL STATION OPERATION
Calling Station Tone Mode Option5-27
Calling Station Tone Mode Option
Enables a calling station to override a called station’s H or P intercom settings,
When placing a call to a station and Tone ringing is desired:
1Dial [6#] on the dial pad.
2Dial the 3-digit extension number,
orPress DSS button of desired station (call tone rings station).
Call Park
To place an outside call in park and consult with, page, or call an internal party:
While connected to an outside line:
1Press...

 I  --...5-28DIGITAL STATION OPERATION
Call TransferGroup
When intercom tone ringing, transferred outside line ringing, recall ringing or initially ringing call is heard
at an unattended telephone:
1Lift handset or press ON/OFF button.
2Dial [#0] on the dial pad,
OfPress the pre-programmed* PICK UP button to connect to the calling party.
You must be in the some pick up group OS the ringing telephone to pick up
the call.
*A Flex Button must be programmed for this feature to operate. Refer to...

 I- -.
.-. . .DIGITAL STATION OPERATION5-29
Camp-On
Answering a Screened Transfer
Your intercom signals according to the intercom position.
1Answer the intercom and receive the transfer notice.7”gi;22,Press the outside line button or loop button flashing on hold.
Transfer Search
When attempting to locate a party:
1Press a station button to signal the desired station.
If the party is not located:
21Press another station button to continue the search.
3When the called party answers, hang up to complete the...

DIGITAL STATION OPERATIONCO Line Access
If you do not have a Camp-On button:
0Go on-hook with present call. Camp-On rings through,or
Place present call on hold, then go on-hook. Camp-On rings through.
CO Line Access
To access outside line:
1Press idle CO line button, Pool button,
or
Dial CO line group access code or LCR access code.
2Dial desired number for outside call.
3Lift handset to converse or use speakerphone.
CO Line Queuing
A station can queue only one line at a time. If you see that a...

DIGITAL STATION OPERATIONConference Combinations
Conditions:
9A Loop button or direct appearance of the queued line is required.
*A Flex Button must be programmed for this feature to operate. Refer to 
Table53;FZe.x Button Programming
Codes.
Conference Combinations
Only stations that have conference enabled can institute a conference,
oAdd-On Conference: Up to eight internal parties can engage in a conference, or seven internal
parties with one external party A maximum of five 
g-party conferences (five...

5-32DIGITAL STATION OPERATIONDial By Name
3Press CONF and hang up or press the ON/OFF button to leave the other conference
parties still connected in an unsupervised conference. CONF button flashes and timer
starts. There is a warning tone before the other parties are dropped.
Re-entering a Conference:
When the controller re-enters the conference, the disconnect timer is reset.
1Lift handset to re-enter a monitored conference.
2To re-enter a conference placed on hold, repeat steps for establishing a...

DIGITAL STATION OPERATIONDirectory Dialing - Stations
2Dial person’s last name on the keypad. UseP@re5-2: Key Pad - Dial By Name below:
Figure 5-2: Key Pad - Dial By Name
+Example: searching for the name BROWN, press [Z] [7] [6] [9] [6].
0%When the system finds a unique numeric match to the name being dialed, the call is placed to the
station matching the name. The intercom call signals the station according to the H-P-T button. If
fewer than 8 digits are dialed, the numeric match is dialed after a 10...

5-34DIGITAL STATION OPERATION
Directory Dialing - Stations
Directory dialing also lets users program a name along with a speed dial bin for later locating a speed dial
number. When prompted, the system displays the name associated with a speed dial number on the LCD
display. When the desired name is shown, the user may have the system dial the number.
Directory dialing lets users associate a name with an entry in the local number/name translation table.
When prompted, the system display the name...