Vodavi Starplus Triad S Description Manual

DIGITAL STATION OPERATIONDirectory Dialing - Stations
3Names beginning with the letter chosen display on the LCD display.
/f there are no names in the Directory List beginning with the desired letter,
a name with the next higher letter shows on the LCD 
disp/ay
4Dial [*] on the dial pad to scroll up (next entry) through the list,
or
Dial [#] on the dial pad to scroll down (previous entry) through the list,
or
Press another button to view the list for a different letter of the alphabet.
5When the desired...

1..5-36DIGITAL STATION OPERATION
Direct Inward System Access (DISA)
Direct Inward System Access (DISA)
1Call the phone number the system administrator specified as the DISA line. The system
answers and returns internal dial tone.
--,..
2Enter the DISA access code specified by the system administrator, if applicable. Dial!.

DIGITAL STATION OPERATIONDistinctive Ringing
2Enter the 2-digit tone number. The telephone speaker sounds a steady tone that
correlates to the 2-digit entry.
3When the desired tone is selected (default ringing code is set to 00) press the SPEED
button to save it as the tone to present when the station is tone rung. Confirmation tone
is heard. This tone is presented as a result of an incoming CO or intercom call, recalling
CO line or Transferred CO line or at any other time the station is tone rung. The...

5-38DIGITAL STATION OPERATIONDistinctive RingingTONE #FREQTONE #FREQ
0069717701885211477
I016971852II19852/1633II
097701941/I281209/1633I
I1077011209II291209/O1
11770/1336301336/1477
12770/1477311336/1633
13770/163332133610
14
770/O331477/1633I
158521941/I341477/oI
I1685211209II351477/oI
178521133636Off
2394111477
Tone Duration = 50 ms150 ms
Table 5-2: Ringing Choiceslssue I- December 1998
STARPLUS Triad-S ProductDescription Manual 

DIGITAL STATION OPERATIONDo Not Disturb (DND)
Conditions:
+Station users may listen to all tones by dialing the 2-digit codes one after another. The tone that is
sounding when the SPEED button is pressed is saved as that station’s tone ringing selection.
*:aA station’s tone ringing selection is maintained in a battery protected area of memory, Therefore, if a
system experiences a power failure or a soft or hard restart, the tone ringing selection is restored.
+The tone selected provides TONE ringing...

 I
5-40DIGITAL STATION OPERATIONExecutive Override
QDND cpability is programmable on a per-station basis.
One-Time Do Not Disturb
Prevents calls from ringing at your station while you are on a call. The One-Time DND condition
automatically cancels when you end your call.
QPress the pre-programmed* DND button while you are off-hook and connected to a CO line or intercom call.
TheDND button LED lights and off-hook tones at your station cancel.
To cancel:
+Replace handset. The DND button LED extinguishes...

DIGITAL STATION OPERATION
Executive/Secretary Pairing+When the Executive joins an intercom call or CO call and the Executive is in the mute state, and
either of the two parties in the intercom call hang up, the call is dropped. If the Executive hangs up,
the call remains a two-party conversation.
+Certain forwarding types affect override operation.
+Intercom button will disallow Executive Override.
*A Flex Button must be programmed for this feature to operate. Refer to Table 5-.j:FZe.xButton P~ogmmming...

5-42DIGITAL STATION OPERATIONFlash On Intercom
Flash On Intercom
When connected to a page zone or another internal party, press FLASH to disconnect page or intercom call.
Intercom dial tone is heard.
Flexible Button Assignment
If you have buttons on your telephone that have NOT been assigned as CO lines, Pooled group, or Loop
buttons, you may program them to suit your own needs. This feature was enhanced in database
programming to allow programming of flexible buttons from a remote location (off-site)....

 IDIGITAL STATION OPERATIONFlexible Button Assignment
gg.3w..;
3Dial the desired code. Refer toTable 5-.?:Flex Butfou Progmnzming Codes.
To erase a flexible button:
1Press the SPEED button twice.
2Press the button to erase.
3Press the FLASH button. Confirmation tone is heard.
4Replace handset or press ON/OFF button.
STARPLUS Triad-S Product Description Manualissue I- December 1998 

DIGITAL STATION OPERATION
Flexible Button Assignment~100-131‘I riad-Sr”t Ext. Numbers
43*[c]
43844 
[VI45 
WI55 
WI55 
WI
56 WI
566
567
57o+[YY]
571
572+5 [UU]
573
574
575+5 [UU]
576+5 [UU]
577+5 [UU]
578
579+5 [VU]
601603
604
621622
625
626
627
628
631
632
633*[ZZ]
633+[00]
634
635
639
641Call Park Location l-7 (System)
Personal Park
Voice Mail Group Pilot Numbers O-7
Hunt Group Pilot Numbers O-7
ACD* Group Pilot Numbers O-9
UCD Group Pilot Numbers O-7
ACD’ Group Pilot Numbers IO-15
ACD*/UCD...