Vodavi Starplus Triad S Description Manual

.DIGITAL STATION OPERATION
Personalized Messages
Table 5-5: Other Key Pad Codes
4Press HOLD to enter message. Confirmation tone is received and DND button LED
flashes.
To cancel the message:
.:+Dials the Message Access Code [633] + [OO] and replaces handset. DND button LED extinguishes.
Personalized Message Code on a Flex Button
You can program the code [633] onto a flexible button to speed access of pre-selected messages.
1Press the SPEED button twice.
2Press the desired flex button. LED flashes.
sDial...

DIGITAL STATION OPERATIONPersonalized Messages
Scrollable Canned Messages
This feature lets the user use a single digit to scroll through the messages and select one. This feature
operates when the phone is in idle mode only and cannot be activated if the station is in Call Forward or
DND mode(s). This feature is unavailable at attendant stations.
1Dial [633]+[#] on the dial pad,
or
Press the MSG button. Clear Messages is always first. The following message displays
on the LCD phone:
CLEAR MESSAGES...

: ---.DIGITAL STATION OPERATION
Prime Flex Button Programming5-67
*:aWhen a message displays by a key telephone, the DND button LED flashes at 15 ipm.
oWhen DND is invoked on the telephone the message cancels.
oMessage Access (with a desired message) may be assigned to a flex button.
+Messages may be entered while off-hook on a call if an intercom call is camped onto the station. This
causes the station calling to see the message.
+SMessages are retained in battery protected area of memory in the event...

5-66DIGITAL STATION OPERATIONProgramming PBX/Centrex Codes Onto Flex Button
Programming PBX/Centrex Codes Onto Flex Button
For easy one-button access to Centrex or PBX features, perform the following steps:
1Program the Centrex or PBX code into a station or system speed dial bin, including,.-Tl

.:-DIGITAL STATION OPERATION
Repeat Redial5-69
Repeat Redial
The feature lets a digital key station redial a busy or no-answer number at specific intervals. The user is
signaled via a queue callback indication. The Redial flexible button flashes at the callback rate of 120 ipm for
15 seconds. If the station does not answer within 15 seconds, the callback cancels, The system retains the
last call the user made. If the station is busy on an internal/external call when the Redial queue callback
occurs, the...

 I
5-70DIGITAL STATION OPERATIONSave Number Redial (SNR)
*A FlexButton must be programmed for this feature to operate. Refer to TabZeS-3:FLexButton Progmmning
Codes.
Save Number Redial (SNR)
If you wish to save the last number you dialed for use later:
1After placing an outside call, keep handset off-hook.
zPress the SPEED button twice.
To Dial a number that was saved using the steps above:
1Press the SPEED button.
2Dial the [*] button.
9*System automatically selects the original line used to place the...

DIGITAL STATION OPERATION
Station Relocation FeatureStation Relocation Feature
The Station Relocation Feature lets a user unplug their station and plug it into another location. Then, by
dialing a code followed by the old station number, bring all the station attributes including extension
number, button mapping, speed dial, and class of service to the new location.
iA station can be relocated by unplugging it, then plugging it into a new location.
2Dial [636] on the dial pad. Then, dial the extension...

5-72DIGITAL STATION OPERATIONSpeed Dial - Storing Numbers
Speed Dial - Storing Numbers
Station Speed numbers can be entered by keyset users. System Speed numbers must be entered by the first
programmed attendant. If no attendant is specified, enter at Station 100.
1 1..
1
2
10
11Press the SPEED button once.
Press an outside line button or pool button.
or
Automatically select an outside line by pressing the SPEED button again.
Dial the speed bin location.
00 to 19 = Station Speed numbers; 20 to 99 
=...

DIGITAL STATION OPERATIONSpeed Dial - System
Speed Dial - System
If no outside line was specified in programming, one can be selected now or the system will assign the line.
1Press the SPEED button.
zDial the speed bin location,
orPress the pre-programmed* speed bin button.
320 to 99 = System Speed numbers.
4When the called party answers, pick up the handset or use the speakerphone to
converse.
*A Flex Button must be programmed for this feature to operate. Refer to Table53:FlexBz&m Programming
Codes....

5-74., . . . .DIGITAL STATION OPERATION
Text Messaging (Silent Response)
[40] = IS IT PERSONAL?
[41] = IS IT AN EMERGENCY?
[42] = IS IT IMPORTANT?
[43] = IS IT URGENT?
[44] = SEND CALL TO VOICE MAIL
[45] = PARKCALL
[46] = OUT OF OFFICE
[47] = PUT CALL THROUGH
1481 = I AM BUSY
[49] = O.K.
[50] = NO
[51] = YES
Conditions:
If the station receiving the text message response was doing a camp-on, it receives a short burst of
tone on the speaker, then the display shows the message that was activated by the...