Vodavi Starplus Sts Key Systems Programming Operation Manual

Direct Inward System Access (DISA) 2-121
Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … 100 is the assigned access code.
DISA Programming
Description
Each CO can be assigned as a DISA line using 1 of the 5 DISA types available.

DISA can be programmed using Range programming.

DISA callers are subject to the Class of Service placed on the line accessed for out dialing.

A system administrator can control call duration after...

2-122 D ire c t In w a rd  Syste m Ac c ess  (D IS A )
Features and Operation
5. Enter a valid number (0-5) on the dial pad to indicate type of DISA desired.
[0] = No DISA
[1] = 24-Hour DISA
[2] = Night DISA
[3] = 24-Hour DISA with forwarding
[4] = Night DISA with forwarding
[5] = Telecenter 24-Hour DISA with forwarding (requires optional software)
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … No outside lines are assigned as DISA lines.
DISA Call...

Direct Inward System Access (DISA) 2-123
Features and Operation
2. Enter a valid number for the range of lines being programmed. If only one line is being 
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 (Page A) is lit. The following message displays to indicate current 
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the DISA CO-TO-CO flexible button (Button #4).
5....

2-124 D ire ct  Sta tio n Sel ec ti o n  / B usy L a m p Fie ld
Features and Operation
Direct Station Selection / Busy Lamp Field
A user with Direct Station Selection (DSS) buttons assigned at their Key Station can call an 
intercom station or transfer a CO call by pressing the appropriate DSS button.
When a button on a Digital Telephone is assigned as a DSS, it also serves as a Busy Lamp Field 
(BLF) to display the status of that telephone. Refer to “Flexible Button Assignment” on 
page 2-149 for...

Directory Dial2-125
Features and Operation
Directory Dial
Description
Directory Dial enables display telephone station users to obtain a directory of station users 
and have the system dial the extension currently displayed. The STS provides locations for up 
to 200 names (000-199). Directory dial also lets users program a name with a speed dial bin 
for use in later locating a speed dial number. When prompted, the system displays the name 
associated with a speed dial number so when the desired name is...

2-126Directory Dial
Features and Operation
Programming Steps
To enter, change, erase or view entries in the Directory Dial List:
Press FLASH and dial [23].The following message displays
AAA = Directory list entry number (000-199)
XXXX = Either:
A 3-digit station number (100-149)
-or-
A 3-digit local number/name translation table number (600-799)
-or-
A 4-digit system speed bin number (9020-9099)
nnn = programmed name (blank if none)
To select a Directory List entry:
1. Press Flexible button #20 for a...

Directory Dial2-127
Features and Operation
3. If an error is made while entering the name, press the BACK SPACE flexible button
(Button #4). This button backspaces one character at a time.
Figure 2-8: Directory List Keypad Map
4. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Name – A name up to 24 characters may be entered into each directory dial list entry. The 
names display alphabetically when accessed by a station user. It is possible to have 
multiple entries...

2-128Directory Dial
Features and Operation
Pressing 2 a third time displays names that start with C). The alphabet is represented on 
the keypad as shown below.
Figure 2-9: Directory Dialing Keypad Map
Names beginning with the letter chosen display on the LCD display.
3. Dial [

] to scroll up (next entry) through the list,
-or-
Dial [#] to scroll down (previous entry) through the list,
-or-
Press another key to view the list for a different letter of the alphabet.
4. When the desired name displays on...

Directory Dial2-129
Features and Operation
Conditions
» If the desired party is an intercom station, that station is signaled according to their 
intercom selector/H-T-P switch (SLT stations tone ring).
» If the desired party is associated to a speed dial bin, the system selects a CO line and dials 
the number programmed into the speed dial bin. Call progress tones are then heard.
» If station is in Directory Dial mode and a CO or intercom call rings in, the station must exit 
Directory Dial mode to...

2-130Directory Dial
Features and Operation
Print Directory Dial Table Parameters
Description
The Print Directory Dial Table command dumps the entire database as a permanent record 
which can serve as a hardcopy of the database. The system baud rate must match that of the 
printer or receiving device.
This is an example of the Directory Dial Table database printout.
LST
---
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032...