Vodavi Starplus Sts Key Systems Programming Operation Manual

CO Line - Ringing Options2-91
Features and Operation
4. Press the RINGING OPTIONS flexible button (Button #14). The following message 
displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Reminder Ring
[1] = Muted Ring
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Muted Ringing is allowed at all stations.
Conditions
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD...

2-92CO Line - Ringing Options
Features and Operation
Recall CO Ringing
Description
The Recall CO Ringing flash rate is the rate at which a CO Line button or Loop button flashes 
when a call recalls to your station. This flash rate can be programmed to 29 different options 
identified in the flash rate table. This enables the programmer to customize the key system 
configuration to desired flash rates.
Programming Steps
1. Press the RECALL CO RING flexible button (FLASH 07, Button #10). The following...

CO Line - Ringing Options2-93
Features and Operation
Reminder Ring Timer
Description
When a CO line rings at a busy station, the call rings at the station using muted ringing. The 
CO Line Ringing Option feature enables a user to receive a reminder ring instead of muted 
ring. This timer provides a reminder ring every time the timer expires, as long as the incoming 
CO line remains connected.
If the user continues their present conversation and the CO party does not hang up, the 
Reminder Ring timer...

2-94CO Line - Ringing Options
Features and Operation
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being 
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 (Page A) is lit. The following message displays to indicate current 
programming of that line or group of lines:
XXX-XXX = CO Line...

CO Port Parameters and Feature Codes 2-95
Features and Operation
CO Port Parameters and Feature Codes
Initialize CO Port Assignments / Flexible Numbering Assignments
Description
CO Port Parameters and Flexible Numbering Assignments can be initialized to default values. 
Refer to “FLASH 52” on page D-16, within Tab le  D - 1, for default values of Flexible Numbering 
Assignments.
Programming Steps
1. Press the CO PORTS/COD flexible button (FLASH 80, Button #4).
2. The following message displays:
3. Press...

2-96CO Ring Detect Timer
Features and Operation
Programming Steps
1. Press the CO PORTS/CODES flexible button (FLASH 85, Button #4). The following 
message displays:
2. To print the CO Port Parameters and Feature Codes, press the HOLD button. The following 
message displays:
When the system finishes sending the requested information to the printer, a 
confirmation tone sounds.
CO Ring Detect Timer
Description
The CO Ring Detect Timer controls the time necessary to detect an outside line ringing into 
the...

Conference2-97
Features and Operation
Conference
Description
The two types of conferencing are the multi-party conference and the unsupervised 
conference.
Multi-party conference -  can include up to eight parties. A maximum of five external parties 
can be conferenced.
Unsupervised Conference - the conference initiator can exit a conference with two outside 
parties and leave them in an unsupervised conference. The initiator can re-enter the 
conference at any time. The STS can automatically terminate...

2-98Conference
Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press the CONFERENCE flexible button (Button #3). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Conference is enabled.
Conditions
» Only...

Conference2-99
Features and Operation
Programming Steps
1. Press the CONFERENCE/DISA TIMER flexible button (FLASH 01, Button #9). The following 
message displays:
2. Enter a valid number on the dial pad that corresponds to 01-99 minutes.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Conference/DISA Timer is set at 10 minutes.
Conference Combinations
Description
Only stations that have conference enabled can institute a conference.

Add-On Conference -- Up...

2-100Conference
Features and Operation
5. If the next conference party is an outside line and a busy or wrong number is 
encountered, press one of the conference parties on hold. This drops the busy or wrong 
number party. Press the conference button again and repeat step 4.
6. When last party answers, press the CONF button twice. (All parties are connected.)
To exit a Conference (controller only) perform ONE of the following:
1 -- Press the ON/OFF button to ON, press MUTE, then replace the handset (to...