Vodavi Starplus Sts Key Systems Programming Operation Manual

Call Park2-41
Features and Operation
Operation
To park a call, while connected to an outside line:
1. Press the TRANS button. The caller is put on Exclusive Hold.
2. Dial the Personal Park location [438] on the dial pad,
-or-
Press the preprogrammed PERSONAL PARK button.
Dial tone sounds.
To retrieve a parked call:
Dial the Personal Call Park location code [438] on the dial pad,
-or-
Press the preprogrammed PERSONAL PARK button.
A talk path is established between the two parties.

SINGLE LINE TELEPHONE...

2-42Call Park
Features and Operation
Call Park - Station
Description
Call park (by station number) allows calls to be parked at a station other than you own, thus 
allowing for expanded park locations.
Operation
To create a CALL PARK (Station) button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button.
3. Dial [439] + [#]. A confirmation tone sounds.
While connected to an outside line:
1. Press the TRANS button.
2. Dial [439] + [XXX] (XXX = station number).
-or-
1. Press the TRANS button....

Call Pickup2-43
Features and Operation
Call Pickup
Description
Stations are assigned to pickup groups. Stations can be in any combination of the eight 
groups or in no group at all.
A station can pickup a call ringing to any specific unattended station by using the Directed 
Call Pickup procedure.
A station can pickup a call ringing to an unattended station within the same UCD group by 
using the Group Call Pickup Procedure.
Use Flash 50 programming when you want to modify a range of stations’ attributes...

2-44Call Pickup
Features and Operation
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the GROUP PICKUP flexible button (Button #5). The following message displays:
6. Enter a valid number (1-8) to program Pickup Groups.
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … All stations are in Group 1.
Conditions
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51...

Call Pickup2-45
Features and Operation

SINGLE LINE TELEPHONE
To use Directed Call Pickup:
1. Lift the handset.
2. Dial [#1].
3. Dial station number of ringing telephone.
Conditions
» User must have access to the specific outside line or a LOOP button for a Directed Call 
Pickup.
Group Call Pickup
Description
A station user can pickup a call to any unattended station within the same pickup group.
Operation
To create a Pickup Button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button.
3....

2-46Call Transfer
Features and Operation
Call Transfer
Description
An outside CO line call can be transferred from one keyset to another within the system. The 
transfer can be screened (announced) or unscreened to an idle or busy station, UCD Group, 
or Hunt Group. The line being transferred rings on the keyset and provides Exclusive Hold 
flashing indication to the receiving partys keyset. Any number of attempts can be made to 
locate someone by calling different keysets without losing the call.
The...

Call Transfer2-47
Features and Operation

SINGLE LINE TELEPHONE
To activate a Screened Transfer (while connected to an outside line):
1. Briefly depress and release the hookswitch.
2. Dial desired intercom number.
3. Announce the call.
4. Hang up to complete transfer.
To make an Unscreened Transfer:
1. Briefly depress and release the hookswitch.
2. Dial desired intercom number.
3. Hang up to complete transfer.
To make a PBX/Centrex Transfer:
1. Briefly depress and release the hookswitch. Intercom dial...

2-48Call Transfer
Features and Operation
Unanswered CO Call Transfer
Description
The Unanswered CO Call Transfer feature provides station users the ability to transfer an 
incoming CO call that is currently ringing at their station without answering it
. Only Incoming 
and Transferred calls can be forced. Calls may be forwarded to any available station, UCD 
group, or VM Group.
A destination station must have a direct appearance for that CO Line or Loop button and not 
in DND, or an error tone is...

Camp On2-49
Features and Operation
Camp On
Description
A station may alert a busy party that an outside line is waiting for them by using the CAMP 
ON button. To camp on a call, press the TRANS button to transfer the call to the desired busy 
station, then press the CAMP ON button. The busy party receives a muted ring over the 
keyset speaker, and a visual flashing CAMP ON LED. By pressing the CAMP ON button, the 
person called places their existing outside call on hold or drops an existing internal...

2-50Card Slot Programming
Features and Operation
Camp On Button Flash Rate
Description
The Camp On button flash rate is the rate at which the Camp On button flashes when you 
receive a Camp On. This flash rate can be programmed to 29 different options identified in 
the flash rate table. This enables the programmer to customize the key system configuration 
to desired flash rates.
Programming Steps
1. Press the CAMP ON BTN flexible button (FLASH 07, Button #15). The following message 
displays:
2. Enter...