Vodavi Starplus Sts Key Systems Programming Operation Manual

Call Forward2-31
Features and Operation
Call Forward Button Flash Rate
Description
The Call Forward Button flash rate is the rate at which the Call Forward button flashes when 
any type of forward mode is used. This flash rate can be programmed to 29 different options 
identified in the flash rate table. This enables the programmer to customize the key system 
configuration to desired flash rates.
Programming Steps
1. Press the CALL FORWARD BTN flexible button (FLASH 07, Button #3). The following...

2-32Call Forward - Preset
Features and Operation
Call Forward - Preset 
Description
The Call Forward Preset feature allows the system database to be configured so that 
incoming CO Lines, which are programmed to ring at a particular station, can be forwarded 
elsewhere in the system predetermined by programming. This feature is active if the station 
ringing is not answered in a specified time, and is particularly useful in overflow applications 
in which a Voice Mail or Auto Attendant may be in use.
The...

Call Forward - Preset2-33
Features and Operation
Preset Call Forward - Station
Description
The Preset Call Forward feature provides separate Busy and No Answer destinations for 
internal and external calls with a No Answer Timer associated to each station. External calls 
ringing that particular station, transferred calls, and internal calls follow this Preset Forward 
feature.
Use Flash 50 programming when you want to modify a range of stations’ attributes using 
fixed station numbers.
Use Flash 51...

2-34Call Forward - Preset
Features and Operation
4. Press button #21. The display updates to reflect current programming for Page C.
Internal No Answer Destination
1. Press Button #1. The following message displays:
2. Enter a valid flexible destination number and press HOLD.
3. To delete the entry, press the [#] key and then press HOLD.
Internal Busy Destination
1. Press Button #2. The following message displays:
2. Enter a valid flexible destination number and press HOLD.
3. To delete the entry, press...

Call Forward - Preset2-35
Features and Operation
No Answer Timer
1. Press Button #5. The following message displays:
2. Enter a valid number (00-99) and press HOLD (00=disable).
DEFAULT … No Answer Timer is set at 10 seconds.
Conditions
» The No Answer Timer controls both Manual and Preset Forwarding (feature code 640 
forwarding and FLASH 50, Page C, Buttons #1-4.
» Station Forwarding overrides the Preset Forward settings.
» Only one station at a time can be programmed when using a flexible station...

2-36Call Forward - Preset
Features and Operation
5. Press the PRESET FWD DESTINATION flexible button (Button #5). The following message 
displays:
6. Enter a valid forward destination on the dial pad.
[9020-9099] = System Speed Bins
[100-149] = Station Extensions
[440-447] = Voice Mail Groups 1-8
[450-457] = Hunt Groups 1-8
[550-557] = UCD Groups 1-8
7. Press HOLD. A confirmation tone sounds and the LCD display updates.
DEFAULT … No destinations are assigned.
Preset Forward Voice Mail ID
Description
The...

Call Forward - Preset2-37
Features and Operation
Preset Forward Timer (Incoming Call to a Destination)
Description
The Preset Forward Timer determines the time an outside line rings before being forwarded 
to a predetermined destination as programmed in FLASH 40, Page C, Button #8. If a forward 
destination is programmed in the CO line field, the CO calls forward to that destination after 
the CO preset forward timer expires. This forward occurs regardless of how many stations the 
line is ringing.
This...

2-38Calling Forward Override
Features and Operation
Calling Forward Override
Description
The Call Forward Override feature allows a user to reach a station that is call forwarded. This 
allows the calling station to override the forwarding which allows the user to use Off Hook 
Voice Over (OHVO), Executive Override, Monitor, Message Wait Indication, Camp On, or Call 
Back Request at that station rather than forwarding to another destination.
Operation
1. Dial [5#] followed by the desired station...

Call Park2-39
Features and Operation
Call Park
Call Park - System
Description
An outside line can be placed into one of eight system park locations and can be retrieved by 
any station that has a direct line appearance or an available Loop button. Parked calls have 
their own recall timer that recalls the originating station, and if still unanswered, the 
Attendant(s). An outside line may also be placed into a station park location. The station user 
then dials a code followed by their station number to...

2-40Call Park
Features and Operation
Conditions
» Intercom calls cannot be parked on system park locations (430-437); intercom calls can 
be parked using the personal park location.
» A CO call parked in a system call park location recalls to the station that parked the call, 
when the call park recall timer expires. The CO call rings to this station until the system 
hold timer expires. The CO call then recalls the Attendant (both the Attendant and 
initiating stations are ringing), and the Attendant...