Vodavi Starplus Sts Key Systems Programming Operation Manual

Account Codes2-11
Features and Operation
2. Press the ACCT CODE flexible button (Button #1). Enter up to 12 digits
(0-9, *, #). [*] represents a do not care digit. The system ignores all digits after this digit 
when entering an account code. The [#] represents a single do not care digit.
3. Press the CLASS OF SERVICE flexible button (Button #2). Enter a 2-digit Class of Service 
Number (1-7) that corresponds to Class of Service 1-7. The first digit represents Day COS 
and the second digit represents...

2-12Account Codes
Features and Operation
To enter an Account Code before a call:
1. Lift the handset.
2. Dial [627].
3. Dial the account code.
4. Dial [9] or CO Access code. Dial tone sounds.
5. Dial the desired number.
Conditions
» Verified Account Codes allow use of an account code as a traveling Class of Service.
» If LCR is activated in the system and verified account codes are activated, the user must 
enter the account code before dialing the LCR code.
» When verified account codes are activated,...

Account Codes2-13
Features and Operation
Programming Steps
1. Press the INITIALIZE ACCT CODES flexible button (FLASH 80, Button #14). The following 
message displays:
2. Press the HOLD button. A confirmation tone sounds.
Print Verified Account Codes
Description
The Print Verified Account Codes command dumps the entire database as a permanent 
record which can serve as a hardcopy of the database. The system baud rate must match that 
of the printer or receiving device.
Figure 2-2: Verified Account Codes...

2-14 Answering Machine Emulation
Features and Operation
Answering Machine Emulation
Description
When a call is sent to a voice mailbox, the station associated with that can press a 
preprogrammed button to listen to the caller leaving the voice mail message. If the mailbox 
owner decides to speak with the caller, the owner can press the preprogrammed button to 
be connected to the caller.
Two methods of notification are available, Ring Mode or Speaker Mode. The preprogrammed 
button type (654+0=Ring...

Attendant Assignment/Features 2-15
Features and Operation
The Mailbox Owner has the following options when a call is sent to a voice mailbox:
To leave the caller in the voice mail and stop the speaker broadcast, press the ON/OFF 
button. The mailbox owner can continue to listen to the message being left without 
taking action at their keyset. When the caller disconnects after leaving the voice mail 
message, the button returns to solid red and the keyset returns to idle.
To talk to the par ty leaving the...

2-16Automatic Privacy
Features and Operation
Automatic Privacy
Description
Privacy is automatically provided on all calls. If one station is conversing, another station 
cannot intrude on that line.
The Automatic Privacy feature can be disabled, allowing up to seven other stations to join in 
on existing CO line conversations. Refer to “Privacy Release” on page 2-216 for details.
Background Music
Description
Each digital telephone user may receive music over their speaker when an optional music 
source...

Battery Backup (Memory)2-17
Features and Operation
2. Press the Volume Bar to change the volume. The following message displays:

SINGLE LINE TELEPHONE
The background music feature is not compatible with single line telephones.
Conditions
» When you pick up the handset or press the ON/OFF button, music automatically 
discontinues.
» When the headset is enabled, BGM discontinues.
» A music source must be connected to the BGM/MOH connector.
Battery Backup (Memory)
Description
A lithium battery is located...

2-18Call Back
Features and Operation
Programming Steps
Press FLASH and dial [15]. The first button is lit and ready for programming Port #1. The 
following message displays:
1. Press the desired PORT # flexible button (Buttons #1, #2, or #3) to select the port to 
program.
2. Enter a 1-digit number for the baud rate:
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT . . . Ports #1, #2, and #3 are set at the 9600 baud rate. The highest connection rate 
for ports...

Call Back2-19
Features and Operation

SINGLE LINE TELEPHONE
If you dial a telephone that is busy and want to leave a Call Back indication:
1. Briefly depress and release the hookswitch.
2. Dial [622] and replace the handset.
Call Back Button Flash Rate
Description
The Call Back Button flash rate is the rate at which the Call Back button flashes when a station 
at which you left a call back request becomes available. This flash rate can be programmed to 
29 different options identified in the flash rate...

2-20Call Back
Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Automatic Call Back Timer is set for 03 seconds (enabled).
Auto Callback - DSS/BLF
Description
The Auto Callback DSS/BLF flash rate is the rate at which a DSS button of a station returning 
your call back flashes. This flash rate can be programmed to 29 different options identified in 
the flash rate table. This enables the programmer to customize the key system...