Vodavi Starplus Sts Key Systems Programming Operation Manual

2
Features and Operation
Detailed descriptions of the System and Station features are presented in alphabetical order. 
An abbreviated feature index, that is organized in Flash code numerical sequence, is 
provided in Appendix E. 

2-2About This Manual
Features and Operation
About This Manual
Content Summary
Chapters
The following chapters contain the descriptions, programming steps, and operating 
procedures for the more commonly-used features and functions.
2 - Features & Operation
3 - Attendant Features & Operation
4 - Uniform Call Distribution (UCD)
Appendices
This Appendix contains detailed information on how to use the more complex features 
available.
Worksheets and Tables have been placed at the end of this book for easy...

About This Manual2-3
Features and Operation
Manual Format & Description
This diagram explains how the Features/Operations are organized in the following chapters 
and appendices. The manual format follows the basic outline as shown, but omits those 
elements that do not apply to a particular Feature or Operation.
Feature / Operation
Narrative to explain the feature/operation.
Sub-Feature / Operation
Description
Narrative to explain the sub-feature/operation.
Related Information
Programming Steps
Consists...

2-4911 Feature
Features and Operation
911 Feature
Description
The 911 Feature allows stations in the system to dial 911 without using an access code. 911 
calls are placed on 911 marked lines. If all lines are busy, an existing call is dropped and the 
911 call is placed.
When this feature is enabled, Trunk Group/LCR Access Code 9 is not available.
Related Information
Programming Steps
To enable/disable the 911 feature:
1. Press the 911 FEATURE flexible button (FLASH 06, Button #13). The following...

911 Feature2-5
Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 (Page A) is lit. The following message displays to indicate current 
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press Button #15 to designate the line for 911 use.
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds and the display...

2-6911 Feature
Features and Operation
The list remains available for review by pressing the 911 ALERT flexible button as necessary, 
until after the messages are deleted.
To delete logged 911 Alert messages:
An attendant uses the following steps to delete the messages on a system-wide basis.
1. Press the 911 ALERT flexible button to display the 911 call information for deletion.
2. Press FLASH to delete that message.
Enhanced 911 Integration
Description
The E911 feature integrates the system to the...

Account Codes2-7
Features and Operation
Enhanced 911 Power Failure Station 
Description
The power failure signal is designed to be used with the normally open (NO) power failure 
leads from the Proctor unit connected to an SLT port or SLA device. When the leads close in 
power failure, this is detected as an off hook and 911 routing ceases to the Proctor unit. 911 
calls are sent via trunks other than those marked for 911 use until the power failure lead 
opens, which is detected as an on hook. 911 calls...

2-8Account Codes
Features and Operation
Operation
When connected to an outside line call:
1. Press the preprogrammed ACCOUNT CODE button (feature code 627 - refer to “Flexible 
Button Assignment” on page 2-149).
2. Dial account code up to 12 digits. ( The other party does not hear the digits being dialed).

If account code is less than 12 digits, an [
] must be entered to return to the call.

If account codes are forced, the account code must be entered prior to dialing the 
outside number.
Account Codes...

Account Codes2-9
Features and Operation
Operation
Prior to placing an outside line call or during an outside line call:
1. Press the preprogrammed ACCOUNT CODE button.
2. Dial account code up to 12-digits.
3. Dial [9] or CO Access code. Dial tone sounds.
4. Dial the desired number.

SINGLE LINE TELEPHONE
To enter an Account Code before a call:
1. Lift the handset.
2. Dial [627].
3. Dial the account code.
4. Dial [9] or CO Access code. Dial tone sounds.
5. Dial the desired number.
To enter an Account...

2-10Account Codes
Features and Operation
Figure 2-1:  Flash 31 Button Mapping
Related Information
Programming Steps
To enable or disable Verified Account Codes:
1. Press the VERIFIED ACCT CODES flexible button (FLASH 06, Button #3). The following 
message displays:
2. Enter 0 or 1 on the dial pad to enable/disable Verified Account Codes.
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Verified Acct Codes are disabled.
To assign Verified Account Codes:...