Vodavi Starplus Sts Key Systems Programming Operation Manual

Flexible Button Assignment2-151
Features and Operation
To assign a CO Line Group for an SLT (with off-hook preference):
Enter: [01], [3], [GG], [HOLD]
GG = Line Group Number (00-23)
Digital Keysets
Specific buttons may be assigned as unused or locked out. When a button is programmed as 
unused, the button may not be programmed by the station user using flexible button 
programming procedures.
24-BUTTON DEFAULT
:
Use Flash 50 programming when you want to modify a range of stations’ attributes using 
fixed...

2-152Flexible Button Assignment
Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the BUTTON ASSIGN flexible button (Button #11). The following message displays:
6. Enter a valid button number [01-24] to program, followed by the desired button function:
[0] =...

Flexible Button Assignment2-153
Features and Operation
Conditions
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD without specifying a flexible number 
to be programmed, you will get the station that is in port/station 100.
Display Flexible Buttons
Description
Each time the DISPLAY BUTTONS flexible button is subsequently pressed, the next four 
buttons display starting with the lowest button number.

When a button is...

2-154Flexible Button Assignment
Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the DISPLAY BUT TONS flexible button (Button #14) to display programming 
assignments. The following message displays:
BB = Button Number
LCD above is an example. Refer to the...

Flexible Button Assignment2-155
Features and Operation
Conditions
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD without specifying a flexible number 
to be programmed, you will get the station that is in port/station 100.
Flex
ButtonDesignationFlex
ButtonDesignation
ACALM Attendant Clear Alarm MRVM Voice Mail Mailbox (Remote)
ACCT Account Code Enter MSG Message Wait Key
AMEM Agent Member Display MUSIC Background...

2-156Flexible Numbering
Features and Operation
Flexible Numbering 
Description 
The Flexible Numbering feature allows the system numbering plan to be modified from its 
default value (refer to “Default Numbering Plan” on page E-13) to accommodate specific 
customer requirements. Station, Pilot, and Feature Access Code numbers may be changed 
with this feature. The length of these numbers may also be modified to meet specific 
customer applications.
The buttons on the key telephone are defined as shown...

Flexible Numbering2-157
Features and Operation
To change a Flexible Code:
1. Select the desired code.
2. Press Button 1. The red LED illuminates.
3. Delete the flexible number by pressing button 2 and then pressing HOLD. The flexible 
number field will be blank.
4. Enter the new code (2-4 digits).
5. Press HOLD.
To erase a Flexible Code:
1. Select the desired code.
2. Press Button 1 (must be lit).
3. Press Button 2.
4. Press HOLD.
Conditions
» Feature access codes cannot conflict with station numbering....

2-158Group Listening
Features and Operation
Group Listening
Description
All digital key stations have a built-in speakerphone. Station users may use the speaker to 
monitor a call while using the handset to converse with the outside party. This enables other 
people in the room to listen to both parties in the conversation.
Programming Steps
1. Press the GROUP LISTENING flexible button (FLASH 05, Button #9).
2. Enter a 0 or 1 that corresponds with the following entries:
[0] = Disabled
[1] = Enabled
3....

Headset Mode2-159
Features and Operation
Headset Mode
Description
Each digital telephone can be individually programmed for headset operation. When 
programmed, an industry-standard, electret-mic-compatible, modular headset with its 
adapter box may be connected to a digital telephone for headset use. This allows handset or 
headset operation by switching the selector switch on the adapter box. Speakerphone 
operation and call announce on intercom are disabled while a station has enabled headset 
mode....

2-160Headset Mode
Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the DISPLAY BUT TONS flexible button (Button #18) to display programming 
assignments. The following message displays:
6. Dial a valid option number (0 or 1) to identify the location where you plug...