Vodavi Starplus Sts Key Systems Programming Operation Manual

Music-On-Hold2-191
Features and Operation
Programming Steps
1. Press MUSIC-ON-HOLD flexible button (FLASH 05, Button #12). Feature toggles on/off 
each time button is pressed; and the display updates.
[0] = Disabled
[1] = Enabled
2. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Music-On-Hold is enabled.
Music-On-Hold (per CO Line)
Description
The Music-On-HOLD feature allows a user to select the Music-On-Hold channel for each CO 
line. This feature lets the system assign CO line...

2-192Mute Key
Features and Operation
5. Press the MUSIC-ON-HOLD flexible button (FLASH 40, Page B, Button #8). The following 
message displays:
6. Enter a valid number on the dial pad to change this feature.
[0] = No Music-On-Hold
[1] = Channel 1
:::::
[8] = Channel 8
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Channel 1 is used for Music-On-Hold.
Mute Key
Description
Pressing the MUTE button while in the speakerphone mode or using the handset disables...

Name In Display2-193
Features and Operation
Name In Display
Description
The Name in Display feature allows every extension (digital/SLT) the capability to program 
the users name for that station, so that people using display telephones see the name instead 
of the station number on their display. The name is programmed at each station by the user 
and may be up to seven letters in length.
Operation
To create your name:
1. Dial [690] on the dial pad.
2. Enter the name (up to 7 characters may be entered)...

2-194Name In Display
Features and Operation
Name / Number Display At Idle
Description
The Name/Number Display feature allows the programmed seven-digit name and station 
number to display together. This option is programmable on a per station basis, however the 
feature must be enabled/disabled in admin programming. If a station has this feature 
enabled but has not programmed a name, the name portion of the LCD is blank. The priority 
of the idle display is UCD, Hunt, Station/Name, or Station alone.
Use...

Name/Number Translation Table 2-195
Features and Operation
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Extension Number
[1] = Name
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Name displays on the LCD.
Conditions
» Not applicable to Single Line Telephones.
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD without specifying a flexible number 
to be programmed, you...

2-196 Na me /Numb e r Tra n sl at io n  Ta b l e
Features and Operation
Programming Steps
1. Press FLASH and dial [55]. The following message displays:
XXX = Table Number 600-799
### = Route Number 000–251
The Route Number LED (Button #1) is lit.
2. Enter a Route Number (000–251) from what was entered in ICLID Ringing Assignments, 
FLASH [43].
To program a phone number into the translation table:
1. Press the PHONE NUMBER flexible button (Button #2) to enter the desired phone 
number into the translation...

Night Service2-197
Features and Operation
To locate an existing index for editing:
1. Press the TABLE NUMBER flexible button (Button #20). The following message displays:
2. Enter a valid number that corresponds to the table numbers 600-799.
3. Press HOLD to complete the entry.
Night Service 
Description
The STS can be programmed so it is automatically placed into and out of night mode. A 
programmable weekly time schedule lets the system administrator preset the time the 
system goes into night mode,...

2-198Night Service
Features and Operation
Automatic / Manual Operation
Description
If the system is operated in the automatic night mode the attendant(s) can override the 
automatic mode by pressing the night key on the attendant(s) phone. The schedule does not 
go into effect until the attendant(s) press the night key again. When the system is placed into 
night mode, CO line ringing follows the night ringing assignments and stations are governed 
by their respective night COS.
The default times for...

Night Service2-199
Features and Operation
External Night Ringing
The system can be programmed so that CO lines marked for UNA rings on the external page 
speakers. Refer to “Universal Day/Night Answer” on page 2-287.
Manual Operation
The Attendant(s) can control the use of Night Mode manually by pressing the NIGHT (DND) 
button [631]. An LED indicates when the system is in Night Mode operation (flashing = 
Special Mode, off = Day Mode).
Night Class of Service (COS)
The system allows each station to be...

2-200Off-Hook Signaling
Features and Operation
Off-Hook Signaling
Description
If a station has been programmed to receive direct outside line ringing and is busy on 
another call, the call rings at the station using either a muted ring signal or reminder ring 
depending on how the option is programmed (refer to “CO Line - Ringing Options” on 
page 2-90). A Reminder Ring Timer provides the reminder ring every time the timer expires, as 
long as the incoming CO line remains connected.
The system defaults...