Vodavi Starplus Sts Key Systems Programming Operation Manual

Repeat Redial2-221
Features and Operation
Repeat Redial
Description
The Repeat Redial feature allows a digital key station to press a flexible button and redial a 
busy or no-answer number after a specific interval. The user is signaled via a queue call back 
indication.
The RPT REDIAL flexible button flashes at the call back rate of 120 ipm for 15 seconds. If the 
station:

Doesn’t answer within the 15 seconds, the call back is canceled. The system retains the 
last call the user made.

Is busy on an...

2-222Relay Programming
Features and Operation
To activate a redial:
Press the preprogrammed REDIAL flexible button,
-or-
Press the ON/OFF button,
-or-
Lift the handset, line is seized and number is dialed. If the user receives a busy/no answer, 
they may repeat the step to activate another redial.
To cancel the operation:
Press the preprogrammed REDIAL flexible button. A confirmation tone sounds and the Auto 
Redial function is cancelled.

SINGLE LINE TELEPHONE
Not applicable
Conditions
» Once the user...

Remote Administration2-223
Features and Operation
2. Enter one of the following sequences on the keypad:
[1] + [1] = External Page Zone
[2] + [1 through 8] = RAN Start (RAN Announcement Tables 1-8)
[3] + STA # = Loud Bell
[4] + CO # = CO Line Control
[0] =  Disables Relay
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Remote Administration
Description
The Remote Administration feature allows authorized personnel to access the administration 
programming via a...

2-224 Re mo t e Syste m Mo ni to r A n d  Mai n ten a n c e
Features and Operation
Database Upload/Download
Description
Database Upload/Download provides a maintenance facility which is added to the Remote 
Administration routine. This routine permits downloading of the database to a PC, when a 
software change is made or when the system must be initialized and reprogrammed.
The routine facilitates the programming of a database on an in-house system which can be 
downloaded to a PC, and then uploaded to...

Ring Down / Hot Line / Off-Hook Preference 2-225
Features and Operation
Ring Down / Hot Line / Off-Hook Preference
Description
The Off-Hook Preference feature lets a key station user automatically have a flex button 
selected when going off-hook or when pressing the ON/OFF button. An SLT user may have a 
particular CO line or a CO line group selected automatically when going off-hook. This may 
be established in programming so that key station users can select and/or change their 
off-hook preference...

2-226 Ring Down / Hot Line / Off-Hook Preference
Features and Operation
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station 
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates...

Ring Down / Hot Line / Off-Hook Preference 2-227
Features and Operation
Operation
If your phone has been programmed for Off-Hook Preference, you can access an outside line, 
or a feature by going off-hook or pressing the ON/OFF button. It simulates the depression of 
a specific button and can be programed by a station user or a database administration 
programmer using code [691] + the button number.
While Off-Hook Preference is enabled, you may access internal intercom dial tone as 
follows:
1. Press...

2-228Save Number Redial (SNR)
Features and Operation
Save Number Redial (SNR)
Description
Any number dialed on an outside line can be saved permanently and used at any time. This 
number is saved until a new number is stored.
Operation
To save the last number dialed, either:
1. After placing an outside call, keep handset off-hook.
2. Press the SPEED button twice.
-or-
Use the Soft Key’s STORE NO option.
To dial a number that was saved (using the steps above), either:
Press the SPEED button, then dial the...

School Zone2-229
Features and Operation
School Zone
Description
The School Zone feature allows a person at a station(s) specified as an Administrator to 
control incoming calls for all stations specified as a Classroom. The Administrator controls the 
type of call forwarding and the call forwarding destination.  Call forwarding types include All 
Call Forward, No Answer Call Forward, Busy Call Forward, and Busy / No Answer Call Forward. 
Valid call forwarding destinations include station numbers, hunt...

2-230School Zone
Features and Operation
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the SCHOOL ZONE flexible button (Button #7). The following message displays:
6. Dial a valid number (0-2) to assign a station as an Administrator, Classroom, or as neither.
0 = Disabled (neither Administrator or Classroom)
1 = Administrator
2  = Classroom
7. Press [HOLD]. A confirmation tone sounds.
DEFAULT … All stations are disabled (not assigned as an Administrator or a...