Vodavi Starplus Sts Key Systems Programming Operation Manual

Off-Hook Voice Over2-201
Features and Operation
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station 
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press the OHVO flexible button (Button #9). The following...

2-202Off-Hook Voice Over
Features and Operation

The calling OHVO station is not connected or able to hear the called station’s 
conversation (the connection only allows the calling station to transmit to the called 
station).
To respond to an Off-hook Voice Over:
After receiving an OHVO announcement, three options are available to respond to the caller:
Option 1 -- This method lets the receiving station respond to an OHVO announcement 
utilizing the MUTE feature button. This button is pressed to carry...

Outside Calls2-203
Features and Operation
» The called station may press a flexible button programmed as a Text Message button, 
[633+#]. Press this flexible button and dial the 2-digit message number (31-51) to 
respond to the calling station. DTMF digits are not heard by either party.
» When silent messaging is used to respond to an OHVO call, the existing call on the 
receiving station is not disconnected while the messages are being sent to the calling 
station.
» The calling station of an OHVO call...

2-204Paging
Features and Operation
To place an outside call on hold:
If your system is programmed for Exclusive Hold Preference:
Press HOLD button once for Exclusive Hold, twice for System Hold.
If your system is programmed for System Hold Preference:
Press HOLD button once for System Hold, twice for Exclusive Hold.
Paging
Description
Stations can individually be allowed or denied the ability to make pages. This applies to all 
internal and external zone paging. A station denied access to paging may...

Paging2-205
Features and Operation

SINGLE LINE TELEPHONE
If you were given the ability to make page announcements:
1. Lift the handset or press the Speaker button.
2. Dial the paging code.
[700] = All Call - Internal and External
[701- 708] = Internal Zone 1-8
[709] = Internal All Calls
[761] = External Zone
3. Speak in normal tone of voice to deliver message.
4. Replace handset to terminate the page announcement.
Paging Access
Description
Use Flash 50 programming when you want to modify a range of...

2-206Paging
Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press the PAGE ACCESS flexible button (Button #1). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Paging is enabled at all stations....

Paging2-207
Features and Operation
Paging Time-Out Timer
Description
The Paging Time-Out Timer determines the maximum length of a page announcement 
(internal, external or all call). The system automatically disconnects the page at the end of this 
time unless the person making the page has already hung up.
The Paging Time-out Timer setting is variable from 01–60 seconds. A 00 entry disables the 
timer and pages are not limited in length. This affects the use of the Meet Me Page feature.
Programming...

2-208Paging
Features and Operation
Paging Zone(s)
Description
Stations are assigned to Page Zones. At least one station must be assigned to a Zone for that 
Zone to be active. Stations can be in any combination of the eight zones or in none of the 
zones.
Use Flash 50 programming when you want to modify a range of stations’ attributes using 
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station 
number.
Programming Steps
1. Press FLASH and dial...

Pause Timer2-209
Features and Operation
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the PAGE ZONE flexible button (Button #6). The following message displays:
6. Enter a valid number (1-8) to program Paging Zone(s).
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … All stations are in Zone 1.
Conditions
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51...

2-210Personal Messages
Features and Operation
2. Enter a valid number on the dial pad that corresponds to 1-9 seconds.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Pause Timer is set at 2 seconds.
Personal Messages
Description
There are various types of personal messages that a station user can use to display on the 
LCD of the digital key telephone calling that station. Message types include pre-assigned 
messages, customized messages, date and time...