Vodavi Starplus Sts Key Systems Programming Operation Manual

Hold - Exclusive2-161
Features and Operation
To deactivate Headset Mode:
Dial [634] on the dial pad,
-or-
Use the Soft Key’s HEADSET option.
-or-
Press the preprogrammed HEADSET MODE button.
LED extinguishes.

SINGLE LINE TELEPHONE
Not applicable
Conditions
» The Headset Mode flexible feature code 634 can be programmed onto a flexible button. 
The button acts as a toggle (i.e., the first depression turns Headset Mode on, the second 
depression turns Headset Mode off.
» Transmission and reception quality...

2-162Hold - Exclusive
Features and Operation
Exclusive Hold Flash Rate
Description
The Exclusive Hold flash rate is the rate at which a CO Line button or Loop button flashes 
when a call is placed on Exclusive Hold. This flash rate can be programmed to 29 different 
options identified in the flash rate table. This enables the programmer to customize the key 
system configuration to desired flash rates.
Programming Steps
1. Press the EXCLUSIVE HOLD flexible button (FLASH 07, Button #12). The following...

Hold - Preference2-163
Features and Operation
Hold - Preference
Description
The Hold Preference feature allows either System or Exclusive hold as the primary hold on the 
first depression of the HOLD button, depending upon programming. A second depression 
invokes the second hold preference.
Programming Steps
1. Press the HOLD PREF flexible button (FLASH 05, Button #2).
2. Enter a valid number (0 or 1) that corresponds with the following entries:
[0] = Exclusive Hold
[1] = System Hold
3. Press HOLD to...

2-164Hot Keypad
Features and Operation
System Hold Recall Timer
Description
The System Hold Recall Timer determines the time before a call placed on System Hold recalls 
the station placing the hold. If unanswered by that station, the call recalls the attendant.
The System Hold Recall Timer setting is variable from 000-300 seconds. An entry of 000 
disables the timer and there is no recall.
Programming Steps
1. Press the SYSTEM HOLD RECALL TIMER flexible button (FLASH 01, Button #1). The 
following...

Hunt Groups2-165
Features and Operation
Hunt Groups
Description
The system can be programmed for up to 12 Hunt Groups. Each Hunt Group can contain up 
to 8 stations each. Each Hunt Group can be independently arranged to use a pilot hunting or 
station hunting technique. If a station is in DND or is forwarded in any manner, it is 
considered busy.
Programming Steps
1. Press FLASH and dial [30]. The following message displays:
The top left button in the flexible button field is lit for programming Hunt...

2-166Hunt Groups
Features and Operation
Station / Pilot / Pilot All Ring -- Hunting Assignments
Description
Pilot Hunting -- Incoming CO, transferred CO, and intercom calls can be directed to a pilot 
number of a hunt group. The system searches sequentially (in the order the extensions were 
entered in the database programming) for an idle station in the group and rings that station. 
Calls directly to stations (by calling the extension number) within the hunt group do not hunt 
but receive call progress...

Hunt Groups2-167
Features and Operation
Initialize Hunt Group Parameters
Description
Hunt Group Parameters may be initialized setting all data fields to their original, default 
value.
Programming Steps
1. Press the HUNT GROUPS flexible button (FLASH 80, Button #10). The following message 
displays:
2. Press the HOLD button. A confirmation tone sounds.
Print Hunt Group Parameters
Description
The Print Hunt Group command dumps the entire database as a permanent record which can 
serve as a hardcopy of the...

2-168Idle  Spe ake r Mode
Features and Operation
Programming Steps
1. Press the HUNT GROUPS flexible button (FLASH 85, Button #11). The following message 
displays:
2. To print data for Hunt Group Parameters, press the HOLD button. The following message 
displays:
When the system finishes sending the requested information to the printer, a 
confirmation tone sounds.
Idle Speaker Mode
Description
The Idle Speaker Mode feature allows you to select whether the first digit dialed is audible 
over the digital...

Intercom2-169
Features and Operation
Intercom
Description
The Intercom Button feature provides station users the function of ringing a busy station via 
the intercom without using the Camp On or Executive Override features. This also allows 
stations to place intercom calls on hold. If calls are ringing on intercom buttons and a 
Handsfree call is received, the Handsfree call is allowed and the calls ringing continue with 
muted ringing. Multiple intercom path buttons can be assigned to a single station,...

2-170Intercom
Features and Operation
Conditions
» If calls are ringing on intercom buttons and a Handsfree call is received, the Handsfree call 
is allowed and the calls ringing continue with muted ringing.
» Multiple intercom path buttons can be assigned to a single station, however up to five 
internal parties can be placed on hold per station. Music-On-Hold is provided to the 
intercom caller on hold.
» Once an intercom button is set up on the keyset, callers dialing that station always 
receive...