Vodavi Starplus Sts Key Systems Programming Operation Manual

Station Message Detail Recording 2-251
Features and Operation
Long Distance - All Calls
Description
The system can be set to record all outgoing calls or only outgoing long distance calls. Long 
Distance calls are defined as beginning with a 1 or 0, or containing eight or more digits. 
Incoming calls are only recorded if TYPE is set for all calls.
Programming Steps
1. Press the CALL TYPE flexible button (FLASH 21, Button #2) to determine the type of calls 
to record. This feature toggles on and off each...

2-252 St a tio n  Me ssa g e De ta il  Rec o rd i n g
Features and Operation
SMDR Port Assignments
Description
PORT #1-- RS-232C port on the BKSU
PORT #2 -- RS-232C port on the BKSU
PORT #3 -- modem
Programming Steps
1. Press the PORT flexible button (FLASH 21, Button #5) to determine which port to use for 
SMDR information.
2. Enter a valid number for the SMDR Port number:
[1] =  Port #1
[2] = Port #2
The LCD displays the current baud rate based on which Port number is assigned to the 
SMDR Port...

Station Relocation2-253
Features and Operation
Station Relocation
Description
The Station Relocation Feature lets a user unplug their station and plug it into another 
location. Dialing a code followed by the old station number brings all the station attributes 
including extension number, button mapping, speed dial, and class of service to the new 
location.
Operation
1. A station can be relocated by unplugging it, then plugging it into a new location.
2. Dial [636] on the dial pad. Then, dial the...

2-254System Parameters
Features and Operation
System Parameters
Initialize System Parameters
Description
System Parameters may be initialized to set all data fields to their original default values. The 
following data fields are returned to their default values upon initializing the System 
Parameters.
Table 2-21: System Parameter Defaults
Program CodeFlexible
ButtonFeaturesDefault Value
(after initialization)
FLASH 01 SYSTEM TIMERS
1 System Hold Recall Timer 60 sec
2 Exclusive Hold Recall Timer 180...

System Parameters2-255
Features and Operation
FLASH 05 SYSTEM FEATURES 1
1 Attendant Override Disabled
2 Hold Preference System
3 External Night Ring Disabled
4 Executive Override Warning Tone Enabled
5Page Warning Tone Enabled
6Background Music Enabled
7 Least Cost Routing (LCR) Disabled
8Account Codes - Forced Disabled
9 Group Listening Disabled
10 Idle Speaker Mode Disabled
11 Call Cost Display Feature Disabled
12 Music-On-Hold Enabled
FLASH 06 SYSTEM FEATURES 2
1 Barge-In Warn Tone Enabled
2 CO Ring...

2-256System Parameters
Features and Operation
FLASH 07 FLASH RATES 
1 Incoming CO Line Ringing Red 480 ipm flutter
2 Incoming Intercom Ringing Red 120 ipm flutter
3 Call Forward Button Red Steady On
4 Message Wait/VM Button Red Steady On
5 Message CallBack – DSS/BLF Red 120 ipm flutter
6Do Not Disturb – DSS/BLF Red 60 ipm Dbl Wink Off
7Auto CallBack – DSS/BLF Red 120 ipm flash
8 UCD Available/Unavailable – DSS/BLF Red 60 ipm Dbl Wink 
9 Transfer CO Ringing Red 120 ipm flash
10 Recall CO Ringing Red 480...

System Parameters2-257
Features and Operation
Programming Steps
1. Press the SYSTEM PARAMETERS flexible button (FLASH 80, Button #1). The following 
message displays:
2. Press the HOLD button. A confirmation tone sounds.
FLASH 21 1 SMDR Enable/Disable No
2 Long Distance/Local Assignment Long Distance
3 Character Print Assignment 80
5SMDR Port Assignments Port #1
FLASH 22 1 Automatic/Manual Operation Auto = No
2-8 Day of Week Programming M-F 08:00 17:00
Sat-Sun ##:## ##:##
FLASH 24 1-14 Card Slot (0-13)...

2-258System Parameters
Features and Operation
Print System Parameters
Description
The currently stored customer database can be printed or uploaded into a file. This command 
dumps the entire database as a permanent record which can serve as a hardcopy of the 
database. The system baud rate must match that of the printer or receiving device. When 
printing the System Parameters the following data prints:

All System Timers

All System Wide Options (External Night Ringing, Hold Preference)

Attendant...

System Parameters2-259
Features and Operation
MUSIC CHANNEL[3..8] CABINET SLOT TYPE
CO - ## #### ## ## ## ------- ---- ----
0 0 LCOB
ATTENDANT STATIONS 0 1 DTIB
100 ## ## ## ## ## ## 0 2 LCOB
0 3 DTIB
DATE & TIME FORMAT 0 4 LCOB
MM/DD/YY, 12 HOURS 0 5 DTIB
0 6 LCOB
PBX DIALING CODES 0 7 DTIB
## ## ## ## ##
EXECUTIVE/SECRETARY PAIRINGS
1 = ### ###
2 = ### ###
3 = ### ###
4 = ### ###
ON BOARD RELAY ASSIGNMENTS
NONE NONE
I/O BAUD RATE
------------------
Port 1 = 9600
Port 2 = 9600
Port 3 = 9600
AUTO NIGHT...

2-260System Reset
Features and Operation
Programming Steps
1. Press the SYSTEM PARAMETERS flexible button (FLASH 85, Button #1). The following 
message displays:
2. To print the System Parameters database, press the HOLD button. The following message 
displays:
When the system finishes sending the information to the printer, a confirmation tone 
sounds.
System Reset
Description
The System Reset feature provides a hard system reset from the keyset instead of the KSU. 
This is useful in cases where...