Vodavi Starplus Sts Key Systems Programming Operation Manual

Toll Restriction2-281
Features and Operation
2. When the first two bin locations are displayed, enter the 2-digit bin number (01–10) of 
the bin to be programmed.
3. Enter the deny code:
[0–9], [
], [#] = Corresponding deny digits numbers
MUTE = Do Not Care digit
4. Press the HOLD button to save the entry. A confirmation tone sounds and the display 
now updates.
5. When all entries for one table are complete, press the flexible button for the next table.
To erase a bin number:
1. Enter a valid bin...

2-282Toll Restriction
Features and Operation
Programming Steps
To program a special table:
(The area code must first be assigned to the table, except for the home area code.)
1. Press the appropriate AREA CODE TABLE (#1 to #3) flexible button (FLASH 70,
Buttons #9 to #11). The following message displays:
2. Enter a valid area code.
3. Press the HOLD button to save the entry. A confirmation tone sounds and the display 
updates.
To enter office codes in a special table:
1. Press the SPECIAL TABLE (#1 to...

Toll Restriction2-283
Features and Operation
D i s p l a y  To l l  Ta b l e  E n t r i e s
Description
To view all entries in the toll tables using the display on the Executive telephone, press, the 
DISPLAY TABLES flexible button (FLASH 70, Button #12) multiple times to scroll through the 
entries.
Programming Steps
Press the DISPLAY TABLES flexible button (FLASH 70, Button #12) while entering 
information into a table.
To view entries in an allow or deny table:
Two entries at a time are displayed on...

2-284Toll Restriction
Features and Operation
Initialize Exception Tables
Description
The Exception Tables parameters, including the Allow/Deny Tables and the Special Tables, 
may be initialized setting all tables to their original, default values. The following Tables are 
cleared returning to their default value upon initializing the Exception Tables parameters:
Programming Steps
1. Press the EXCEPTION TABLES flexible button (FLASH 80, Button #5). The following 
message displays:
2. Press the HOLD...

Toll Restriction2-285
Features and Operation
Figure 2-21: Exception Tables Printout
Programming Steps
1. Press the EXCEPT TABLES flexible button (FLASH 85, Button #5). The following message 
displays:
ALLOW TABLE A SPECIAL TABLE 1 AREA CODE
------------- --------------------------------
01 11 ALLOWED OFFICE CODES
02 12
03 13
04 14
05 15 SPECIAL TABLE 2 AREA CODE
06 16 --------------------------------
07 17 ALLOWED OFFICE CODES
08 18
09 19
10 20
SPECIAL TABLE 3 AREA CODE
DENY TABLE A...

2-286Toll Restriction
Features and Operation
2. To print the Except Tables, press the HOLD button. The following message displays:
When the system finishes sending the requested information to the printer, a 
confirmation tone sounds.
Toll Restriction Related Items
CO/PBX Lines
When CO lines are marked as PBX lines the system first checks the PBX code table for a valid 
match. If the first digits dialed do not match the entries in the PBX code table the call is 
considered an attempt to call another PBX...

Uniform Call Distribution2-287
Features and Operation
LCR Versus Toll Restriction
LCR is not an alternative to toll restriction nor is toll restriction an alternative to LCR. They 
work best when programmed together. Toll restriction specifies station dialing privileges and 
LCR provides call routing to appropriate lines.
LCR can enhance toll restriction by providing Store and Forward operation to analyze digits 
being dialed before a trunk is seized. This prevents users from by-passing toll restriction...

2-288Univer sal Day/Nig ht  A ns we r
Features and Operation
Universal Day Answer (UDA) 
Description
UDA-assigned CO lines can signal over external page port(s). External Day ringing is 
programmed on a system-wide basis in administrative programming. Stations that do not 
have access to a line during the day can answer that line while the System is in the day mode 
by dialing a UDA code [#5]. To use this feature, a LOOP button or an appearance of the trunk 
must be present on the station.
Programming...

Universal Day/Night Answer2-289
Features and Operation
» If External Day ring is disabled, or the system is not in the day mode, external page 
ringing is disabled.
» Ringing CO lines not assigned CO line group access for a particular SLT may be answered 
in a UDA service. Dialing privileges are unavailable on CO lines to which an SLT does not 
have access. CO lines without UDA status may not be answered or accessed via UDA 
procedures.
» If two single-line telephones attempt to retrieve one ringing CO...

2-290Vo i c e Ma i l
Features and Operation
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … UNA is enabled.
Vo i c e  Ma i l  
Description
Up to eight Voice Mail groups can be configured in the STS system. Each group can contain 
up to 24 Voice Mail designated ports, each of which interfaces with a port on an SLT card (or 
DTIB if using a Digital Voice Mail).
An externally provided Voice...