Vodavi Starplus Sts Key Systems Programming Operation Manual

Vo l u m e  Co nt ro l2-311
Features and Operation
Volume Control 
Operation
The volume control on the Digital Key Telephone controls ringing, handset, and 
speakerphone volumes. It also affects the receive volume of the Wanderer cordless unit.
While using these function/features, Digital Key Telephones display the following messages:
Listening to Background Music ...
Using the speakerphone on an Intercom call ...
Using the handset on an Intercom call ...
Using the speakerphone on a CO call ...
Using the...

2-312Vo l u m e  C o n t r o l
Features and Operation
Receiving an incoming tone ringing Intercom or CO call ...
.

SINGLE LINE TELEPHONE
The volume control on the Vodavi Single Line Telephone is located on the right side of the 
telephone. The slider switch options are HI for loud volume, LO for low volume, and OFF to 
turn the ringer off. Two-line models have a volume switch for each line. Certain models do 
not have an OFF option.
Speakerphone models have a sliding volume switch to adjust...

3
Attendant Features and
Operation
The Attendant and Attendant(s) with DSS/BLF features of the STS System are listed and 
described in alphabetical order. Attendant features are in addition to digital station features.
The instructions in this chapter are based on the use of a digital display telephone. 










 
 
 
 
 
 

Introduction3-3
Attendant Features and Operation
Introduction
The instructions in this chapter are based on the use of a digital display telephone. The STS 
System provides the following keys, indicators and features:
Handset and Speaker are located at the left side of the front panel. A handset is provided to 
allow confidential conversation when desired. Lifting the handset from its cradle (going 
off-hook) disengages the station’s built-in speaker. The speaker is located directly below the 
center...

3-4Attendant Features - Index
Attendant Features and Operation
Outside Calls are announced by a tone signal repeated every 3.2 seconds. The 
corresponding outside line indicator flashes slowly.
Intercom Calls can be tone ringing or voice announce. If it is voice announced, the receiving 
station receives two bursts of tone prior to the announcement. If it is a tone ringing call, the 
receiving station hears a tone ring every 2.4 seconds.
Attendant Features - Index
Table 3-1: Attendant Features
Features...

Attendant Features - Index3-5
Attendant Features and Operation
911 Alert
Description
Any station user or attendant who programs a flexible button for 911 ALERT (feature code 
608) will be alerted of internal stations placing 911 calls. The system can store the sixteen 
most recent 911 calls. Calling information includes the time/date of the call, as well as the 
station number from which the call was placed.
The initial 911 Alert indications include:

Audible ringing tone

Green flashing 911 ALERT...

3-6 Attendant CO Line External (Off-Net) Forward
Attendant Features and Operation
Attendant CO Line External (Off-Net) Forward
Description
The Attendant CO Line External (Off-Net) Forward feature lets the first Attendant station 
forward incoming CO calls to an off-net location. The Attendant must have a direct 
appearance of the CO line to be forwarded. Forwarding can be established on a per CO line 
group basis or on an all CO line groups basis. In a speed dial bin, store the number of the 
off-net...

Attendant Custom Message3-7
Attendant Features and Operation
Attendant Custom Message
Description
The Attendant Custom Message feature allows the first programmed Attendant (system 
administrator) to enter up to ten custom messages for system-wide use by station users. Up 
to 24 characters may be entered as the custom message (this represent 48 digits entered).
A station user may store any of the available messages under a flexible button assigned as a 
Message Access button. These messages may be...

3-8Attendant Day/Night/Special
Attendant Features and Operation
Conditions
» Key telephones and SLTs can leave a message. SLTs are notified that they left a message 
with a warning tone when going off-hook.
» Incoming and outgoing calls are not inhibited with a message displayed.
» When a message is displayed by a key telephone, the DND button LED flashes at the 
15 ipm rate.
» When DND is invoked on the telephone, the message is canceled.
» Message Access (with desired message) may be assigned to a...