Vodavi Starplus Sts Key Systems Programming Operation Manual

DSS/BLF Console with Map3-19
Attendant Features and Operation
DSS Console Map #2 -- by default has 48 Stations, 100–147. All buttons are flexible and can be 
changed by the station user. This map can be duplicated on another DSS/BLF console and 
assigned to the same station.
Figure 3-3: DSS Console Map #2
100 101 102 103
104
105106
107
108
109 110111
112 113
114115
116 117
118119
120 121
122123
124 125
126127
128 129
130131
132 133
134135
136 137
138139
140 141
142143
144145
146
147 

3-20DSS/BLF Console with Map
Attendant Features and Operation
DSS Console Map #3 -- by default, CO  Lines 1-28 appear in sequential order.
Figure 3-4: DSS Console Map #3
CO1 CO2 CO3 CO4
CO5
CO6CO7
CO8
CO9
CO10 CO11CO12
CO13 CO14
CO15CO16
CO17 CO18
CO19CO20
CO21
CO22
CO23CO24
CO 25 CO26
CO27CO28 

Display Timer3-21
Attendant Features and Operation
Station ID for DSS/BLF Console With Map
Description
Each system port must be programmed to identify the type of station that operate on that 
port. Each station type must be identified.
Programming Steps
1. Press the STATION ID flexible button (FLASH 50, Page B, Button #1).
2. Dial [1-3] on the  dial pad to identify the desired DSS map number (refer to “Mapping 
Options” on page 3-18).
3. Enter a valid station number to which the DSS/BLF Console is...

3-22 IC LI D  Ca l l  Ma n a g em en t Ta b l es
Attendant Features and Operation
ICLID Call Management Tables
Description
Two ICLID Call Management Tables are maintained in the system. These tables consist of an 
Answered Call Management Table and an Unanswered Call Management Table. Each have a 
100-entry capacity.
Answered Call Management Table
Description
The Answered ICLID Table feature adds a table that captures the ICLID calls that were 
answered. The table can store up to 100 entries of the most...

ICLID Call Management Tables 3-23
Attendant Features and Operation
Unanswered Call Management Table
Description
An Unanswered Call Management Table with 100-entry capacity is maintained in the system. 
The calling number/name information pertaining to any unanswered call is placed in this 
table at the time the system determines the call was abandoned.
This table may be accessed from any display telephone to review unanswered calls. Only an 
Attendant station(s) can delete an entry from this table....

3-24Recall
Attendant Features and Operation
Recall
Description
A held CO call left unattended by a station recalls the Attendant(s) after a programmable 
time period elapses. A recalling CO line flashes at a distinctive rate and has an LCD display 
that identifies the originating station of the unanswered call.
Operation
To answer a recall, press OUTSIDE LINE button that is flashing at a very fast rate.
Conditions
» Recall does not apply to intercom calls placed on hold.
Attendant Recall Timer...

Speed Dial - System Storing3-25
Attendant Features and Operation
Speed Dial - System Storing
System Speed numbers must be entered by the first programmed Attendant. If no Attendant 
is specified, enter at Station 100.
1. Press SPEED once, then press desired outside line key; or select an outside line 
automatically by pressing the SPEED button twice.
2. Dial the System Speed bin location (9020-9099).
3. Dial telephone number.
4. Press the SPEED button.
5. Hang up.

Pressing the TRANS button during number...

3-26Speed Dial - System Storing
Attendant Features and Operation 

4
Uniform Call Distribution
This chapter covers the topic of  Uniform Call Distribution (UCD).