Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

@initem DVX In
SYSTEM PARAMETERS PROGRAMMINGDigital Key Telephone System
710.2SYSTEM FEATURES PROGRAM-
MlNG
Programming StepsDescriptionIf the system is in the programming mode,
continue using the program codes. If starting toprogram here, enter the programming mode.
Refer to Sec. 700.2, Program Mode Entry (Key
Station)
If any System Features are to be changed:1. Press FLASH and dial (051. The following
message is shown on the display phone:This section describes the procedures and
steps necessary to...

infxnitem DVX I’Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMING
SYSTEM FEATURES (Cont’d)
M. Handset Receiver Gain
Programming StepsIf Handset Receiver Gain feature is to be en-
abled:1. Press the HANDSET RECEIVER GAIN
flexible button (Button # 13). This feature
will toggle on and off with each depression,and the display will update with each de-
pression.l LED on = Handset Receiver Gain is en-
abled
l LED off = Handset Receiver Gain is dis-
abled
2.Press the HOLD button to save the entry....

SYSTEM PARAMET
ERS PROGIUUHMING
infinitem DVX I’Digital Key Telephone System
SYSTEM FEATURES (Cont’d)
N.Call Qualifier Tone Option
Programming Steps
If the Call Qualifier Confirmation Tone is to be
enabled:1. Press the CALL QUALIFIER TONE OP-
TION flexible button (Button # 14). This
feature will toggle on and off with each
depression, and the display will update
with each depression.l LED on = Confirmation tone is enabled
l LED off = Confirmation tone is disabled
2.Press the HOLD button to save the...

infznitem DVX I’Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMING
SYSTEM FEATURES (Cont’d)
k Attendant Override
Programming Steps
If this feature is to be changed:
1.Press the A’ITN OVERRIDE flexible button
(Button # 1). This feature will toggle on andoff with each depression, and the display
will update with each depression.l
LED off = Attendant Override is disabledl
LED on = Attendant Override is enabled
2.Press the HOLD button to save the entry.
Confirmation tone is heard.B. Hold Preference...

SYSTEM PARAMETERS PROGRAMMINGinfinite” DVX 
I’Digital Key Telephone System
SYSTEM FEATURES (Cont’d)
C. External Night 
Ring
Programming Steps
If this feature is to be changed:
1.Press the EXT NIGHTRING flexible button
(Button 
#3). This feature will toggle on andoff with each depression, and the display
will update with each depression.l LED off = Ext. Night Ring is disabled
l LED on = Ext. Night Ring is enabled
2.Press the HOLD button to save the entry.
Confirmation tone is heard.
D.Executive Override...

infkitem DVX InDigital Key Telephone System
SYSTEM PARAMETERS PROGRAMMING
SYSTEM FEATURES (Cont’d)
E. Page Warning Tone
Programming Steps
If this feature is to be changed:
1.Press the PAGE WARN TONE flexible but-
ton (Button #5). This feature will toggle onand off with each depression, and the
display will update with each depression.l
LED on = Page Warning Tone is enabledl
LED off = Page Warning Tone is disabled
2.Press the HOLD button to save the entry.
Confirmation tone is heard.DescriptionDetermines...

infinitem DVX I’
SYSTEM PARAMETERS PROGRAlVIMINGDigital Key Telephone System
SYSTEM FEATURES (Cont’d)
G. LCR Enable
Programming Steps
If this feature is to be assigned:1. Press the LCR ENABLE flexible button
(Button #7). This feature will toggle on andoff with each depression, and the display
will update with each depression.l LED on = LCR is enabled
l LED off = LCR is disabled
2.Press the HOLD button to save the entry.
Confirmation tone is heard.H. Account Codes 
- Forced
Programming Steps1. Press...

inflnitem DVX I’
Digital Key Telephone SystemSYSTEM PARAMETERS PROGRAMMlNG
SYSTEM FEATURE!3 (Cont’d)
I.Group Listening
Programming Steps
If Group Listening is to be assigned:
1.Press the GROUP LISTENING flexible but-
ton (Button 
#9). This feature will toggle onand off with each depression, and the
display will update with each depression.l LED on = Group Listening is enabled
l LED off = Group Listening is disabled
2.Press the HOLD button to save the entry.
Confirmation tone is heard.J. 
Idle Speaker...

SYSTEM PARAMETERS PROGWWIMING
infinitem DVX InDigital Key Telephone System
SYSTEM FEATURE!3 (Cont ‘d)K.
Call Cost Display Feature
Programming Steps
If Call Cost Display Feature is to be enabled:1. Press the CALL COST DISPLAY flexible
button (Button # 11). This feature will tog-gle on and off with each depression, and
the display will update with each depres-
sion.l LED on = Call Cost Display is enabled
l LED off = Call Cost Display is disabled
2.Press the HOLD button to save the entry.
Confirmation tone...

inflniteTM DVX I’
Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMING
710.3ADDITIONAL SYSTEM FEATURES
PROGRAMMING
Programming StepsIf the system is in the programming mode,
continue using the program codes. If starting toprogram here, enter the programming mode.
Refer to Sec. 700.2, Program Mode Entry (Key
Station)
If any System Features are to be changed:
1.Press FLASH and dial [06]. The following
message is shown on the display phone:DescriptionThis section describes the procedures and
steps...