Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

SYSTEM PARAMETERS PROGRAMMING
in.t.nitem DVX I’Digital Key Telephone System
MISC. SYSTEM PARAMET
ERS (Cont’d)
7 10.16HUNT GROUPS
A. Hunt Group Programming
Programming StepsIf Hunt Groups are to be assigned:
1.Press FLASH and dial [30]. The following
message will be shown on the display:2. The top left button in the flexible button
field will be lit for programming Hunt
Group 
l(450). To change Hunt Groups or
enter a different Hunt Group, press the
appropriate flexible button l-8 
(450-457)and perform the...

intftnitem DVX I’
Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMlNG
MISC. SYSTEM PARAMETERS (Cont’d)
710.17 LOCAL NUMBER/NAME TRANSLA-
TION TABLE
Programming StepsIf changes need to be made to Local Num-
ber/Name Translation Table:1. Press FLASH and dial 
[55]. The following
message is shown on the display phone:
Where:
- XXX= Table Number 300-499
- ###= Route Number 000- 199
2.The ROUTE NUMBER LED is lit. Enter the
three-digit Route Number (000- 199) from
what was entered in program code,...

SYSTEM PARAMETERS PROGRAMMING
inj?nitem DVX I’Digital Key Telephone System
MISC. SYSTEM PARAMETERS (Cont’d)
LOCAL NAME TRANSLATION (Cont’d)
Programming StepsTo program a phone number into the Local
Number/Name Translation table:1. Press the PHONE NUMBER flexible but-
ton (Button #2) to enter the desired phonenumber into the translation table. Maxi-
mum length of phone number is 14-digits,including hyphens. Numbers entered
must be in the format: l-602-Xxx-xXxX.
LA=21
B 
=22C 
=23D 
=31E 
=32F 
=33G 
=41H...

infhitem DVX I’Digital Key Telephone System
SYSTEM PARAMETERS PROG-G
MISC. SYSTEM PARAMETERS (Cont’d)
LOCAL NAME TRANSLATION (Cont’d)
Programming Steps
To program a name into the translation table:1. Press the NAME flexible button (Button
#3) to enter the desired name into the
translation table. Maximum length is 24-
characters.A=21
B 
=22C 
=23D 
=31E 
=32F 
=33G 
=41H 
=42I 
=43J 
=51K 
=52L 
=53M 
=611 =l#“ =(-)IN 
=622 =2#, =020 
=633 =3#? =03P 
=714 =4#/ =04
Q =745 =5#! =*1R 
=726 =6#$ =*2s 
=737...

in.nitem DVX I*
Digital Key Telephone System
TABLE OF CONTENTS FOR SECTION 720
SECTION 720
720.1
720.2
720.3CO LINE ATTRIBUTES PROGRAMMING
.....................................720-lINTRODUCTION....................................................................................
720- 1A. DTMF/Dial Pulse Programming.................................................
720-2B. CO/PBX Programming...............................................................
720-2
C.UNA...

Digital Key Telephone System
CO LINE ATTRIBUTES PROGRAMMING. . kI.;.--..,1
‘..,./; .LII ., I’ ;SECTION 720
720.1INTRODUCTION
r’ ; L-- “,:$ 1:‘”
Programming StepsIf the system is in the programming mode,
continue using the program codes. If starting toprogram here, enter the programming mode.
Refer to Sec. 700.2, Program Mode Entry (Key
Station).
If any CO line features are to be changed:a. Press 
FLASH and dial [40]. The following
message is shown on the display phone:b. Enter a four-digit number for the...

CO LINE ATTRIBUTES PROGRAMMINGinfznite” DVX I’Digital Key Telephone System
CO LINE ATTRIBUTES (Cont’d)
A. 
DTMF/Dial Pulse Programming
Programming Steps
1.Press the DTMF/DIAL PULSE flexible but-
ton (Button 
# 1). This feature will toggle onand off with each depression, and the
display will update with each depression.l LED on = DTMF enabled
l LED off= Dial Pulse enabled
2.Press the HOLD button to save the entry.
Confirmation tone is heard.B. 
CO/PBX Programming
Programming Steps
1.Press the CO/PBX...

infbitem DVX InDigital Key Telephone System
CO LINE ATTRIBUTES 
PROGIMMMINGCO 
LINE ATTRIBUTES (Cont’d)
C. UNA Programming
Programming Steps
1.Press the UNA flexible button (Button #3).This feature will toggle on and off with
each depression, and the display will up-
date with each depression.l LED on = UNA is enabled
l LED off= UNA is disabled
2.Press the HOLD button to save the entry.
Confirmation tone is heard.
D.DISA Trunk-to-Trunk (Per CO Line)
Programming StepsIf the CO line DISA Trunk-to-Trunk...

CO LINE ATTRIBUTES PROGRAMMINGinfinitem DVX I’Digital Key Telephone System
CO LINE ATTRIBUTES (Cont’d)
E. Privacy
Programming Steps
If CO Line privacy is to be changed:1. Press the PRIVACY flexible button. (But-
ton 
#5. This feature will toggle on and off
with each depression, and the display will
update with each depression.l LED on = Privacy is enabled
l LED off = Privacy is disabled
2.Press the HOLD button to save the entry.
Confirmation tone is heard.
DisabZing of the privacg feature may belimited...

infznitem DVX I’Digital Key Telephone System
CO LINE ATTRIBUTES PROGRAMMING
CO LINE ATTRIBUTES (Cont’d)
F. Loop Supervision Programming
Programming Steps
1.Press the LOOP SUPVflexible button (But-ton 
#6).
2.Enter a one-digit timer value on the dial
pad between 1 and 9 which corresponds
to 100-900 msec.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
Description
LOOP SUPV. Loop supervision is used primar-ily with DISA, Voice Mail/Auto Attendant and...