Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

CO LINE ATTRIBUTES PROGRAMMINGin.finitem DVX I’
Digital Key Telephone SystemCO LINE ATTRIBUTES (Cont’d)
G. DISA Programming
Programming Steps
1.Press the DISA flexible button (Button #7).
2.Enter a one-digit value on the dial pad to
indicate type of DISA desired.
- 0= No DISA (disable DISA)
- l= 24-Hour DISA
- 2= Night DISA only
- 3= 24-Hour DISA with forwarding
- 4= Night DISA only with forwarding
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update....

infiniteT”b DVX I’Digital Key Telephone System
CO LINE ATTRIBUTES PROGRAMMING
CO LINE ATTRIBUTES (Cont’d)
H. Flash Timer Programming
Programming Steps1. Press the FLASH TIMER flexible button
(Button 
#8).
2.Enter a two-digit timer value on the dial
pad between 01-20 which corresponds to
100 msec-2 seconds.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
Description
FLASH TIMER. Flash is a programmable open-ing on a line for signaling. When using an...

CO LINE ATTRIBUTES PROGRAMMINGin.nitem DVX I’Digital Key Telephone System
CO LINE ATTRIBUTES (Cont’d)
J.Class of Service (COS) Programming
Programming Steps
1.Press the LINE COS flexible button (But-
ton 
#lo).2. Enter a one-digit value on the dial pad
between l-5 which corresponds to five
possible class of service to which a line
may be assigned:
- COS 1= No restrictions.
- COS2= Table A governs, Station COS 2
and 4 are monitored.
- COS3= Table B governs, Station COS 3
and 4 are monitored.
- COS4=...

infznite’“l DVX I’Digital Key Telephone System
CO LINE ATTRIBUTES PROGRAMMING
CO 
LINE ATTRIBUTES (Cont’d)
M. Trunk Direction
Rrogramming StepsDescription
1.Press the TRUNK DIRECTION flexible but-CO Lines can be programmed on a per CO Lineton. (Button 
# 13). The following messagebasis for the type of CO Line desired: Incoming,
is shown on the display phone:Outgoing, or Both incoming and outgoing.
l Incoming restricts the CO Line for incoming
calls only.
-Users can press a CO line button or dial
CO line...

infinitem DVX m
CO LINE A’ITRIBUTES PROGRAMMINGDigital Key Telephone System
CO LINE ATTRIBUTES (Cont’d)
720.2DIAL PULSE PARAMETERS
Programming StepsDescription
If this feature is to be assigned:a. Press FLASH and dial 
[4 11. The following
message is shown on the display phone:
b.The Dial Pulse features wiIl toggle on and
off with each depression, and the display
will update with each depression.l LED on= 
60/40 (RATIO), 1Opps(SPEED)
. LED off = 
66/33 [RATIO), 2Opps(SPEED)
c. Press the HOLD button to...

infznite” DVX I’Digital Key Telephone System
CO LINE ATTRIBUTES PROGRAMMING
CO LINE ATTRIBUTES (Cont’d)
720.3FLEXIBLE PORT ASSIGNMENT
FEATURE
Programming Steps
If the CO Line numbers need to be relocated to
different ports:a. Press FLASH and dial 
[42]. The following
message is shown on the display phone:I08 09 10 11 12
b.The buttons 1 through 4 indicate cards 1
through 4. When the relocation program is
initially entered, Button # 1 will be lit indi-
cating that the user is programming the CO
Line...

Programming steps-If the system is in the programming mode,
continue using the program codes. If starting to
program here, enter the programming mode.
Refer to Sec. 700.2, Program Mode Entry (Key
Station).If any Page 
“B” CO line features are to be
changed:
a. Press FLASH and dial 
[40]. The following
message is shown on the display phone:
b. Enter a four-digit number for the range of
lines being programmed. If only one line isbeing programmed, enter that number
twice (0101).
c. Press the HOLD button to...

in$initeRd DVX ’ and DV2I I1Digital 
Keg Telephone Systems
PAGE “B” CO LINE ATTRIBUTES (Cont’d)
ATransmit Volume Option (FP3)
Programminff steps
If the CO Transmit Volume needs to be
changed:
1.Press theTRWSlWITVOLUME flexible but-ton (Page B, Button # 4). The following
message is shown on the display phone:
Co LINE ATTRIBUTES PROGRARdMING
Description
Up to ten volume levels are available for each
CO Line in the system.Default: By default, all CO lines are pro-
grammed for level 7 (OdB).
J
2. Enter the...

CO I ATTRIBUTE PROG-GPAGE 
‘73” CO LINE ATTRKBUTES (Cont’d)
C.Preset Cdl Forward Destination (FP3)
Programming Steps
To select a preset call forward destination:
1. Press the PRESET CALL FWD flexible but-
infistite” DVX I and DVX *IDigital Key Telephone 
SJTstemS
Description
This enhancement allows each CO line to be
preset call forwarded. This allows a CO line to
initially ring at multiple stations and forward to
a pre-determined destination. The 
dqtination
can be a station (EKT-SLT) or Hunt.&&p.Each...

i@initem DVX I and DVX I1Digital Key Telephone Systems
CO LINE 
ATTRI8UTES PROGRAMMING
PAGE 
3” CO LINE ATTRIBUTES (Cont’d)
E.CO Line Reset Forward Timer (FP3)
Pro&p3mming steps
If this timer is to be changed:
1. Press the PRESET FORWARD TIMER flex-
ible button (Page B , Button 
#8). The follow-ing message is shown on the display
phone:
2. Enter a two-digit timer value on the dial
pad which corresponds to 
08-99 seconds.
3. Press the HOLD button to save the entry.
Confiiation tone is heard and the...