Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

SYSTEM PARAMETERS PROGRAMMING
ingnite” DVX I’Digital Key Telephone System
MISC. SYSTEM PARAMET
ERS (Cont’d)
7 10.10BAUD RATE ASSIGNMENTS
Programming Steps
If Baud Rate(s) are to be assigned:
1.Press FLASH and dial [ 151. The first but-
ton will be lit and ready for programming
Port 
#l. The following message is shown
on the display phone:
To program the Baud Rate(s) for Ports # 
1, #3,
#4:
Programming Steps
1.Press the desired PORT # flexible button
(Buttons # 1, 
#3 ,or #4) to determine the
port to be...

infhitem DVX I’
Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMING
MISC. SYSTEM PARAMETERS (Co&d)7 10.11 
ACCESS CODES
Programming StepsIf the system is in the programming mode,
continue using program codes. If starting to
program here, enter the programming mode.
Refer to Sec. 700.2, Program Mode Entry (Key
Station).
If Access Codes are to be changed:
1.Press FLASH and dial [20]. The following
message is shown on the display phone:A. DISA Access Code
Programming Steps
If this feature is to be...

infinitem DVX I’
SYSTEM PARAMETERS PROGRAMMING
Digital Key Telephone System
ACCESS CODE 
PROGRAMMlNG (Cont’d)
B. Database Admin. Password
Programming Steps
If this feature is to be assigned:
1.Press the ADMIN PASSWORD flexible but-
ton (Button 
#2). The following message isshown on the display phone:
Description
The password used to enter customer databaseprogramming can be individualized by each
customer. This allows the system administrator
to block unauthorized personnel from entering
database...

infmitem DVX I’Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMlNG
MISC. SYSTEM PARAMETERS (Cont’d)
710.12STATION MESSAGE DETAIL RE-
CORDING (SMDR)
Programming StepsIf Station Message Detail Recording is to be
used:
1.Press FLASH and dial 12 11. The following
message is shown on the display phone:
2.To program SMDR features, use the flex-
ible button(s) as defined in the following
procedures.
3.The SMDR, TYPE, and PRINT features willtoggle on and off with each depression,
and the display will...

SYSTEM PARAMETERS PROGRAMMUVG
infinitem DVX InDigital Key Telephone System
STATION MESSAGE DETAIL RECORDING
(cont’d)C. Character Print Assignment
Programming StepsDescription1. Press PRINT FORMAT flexible button
(Button 
#3) to determine the print format
of SMDR records. This feature will toggle
on and off with each depression, and the
display will update with each depression.l LED ON = 
80-Character is enabledThe system can be programmed to print indi-
vidual SMDR records in either a 1 -line 80-char-...

infznitem DVX InDigital Key Telephone System
SYSTEM PARAMETERS PROGRAMMING
MISC. SYSTEM PARAMETERS (Cont’d)
710.13WEEKLY NIGHT MODE SCHED-
ULE
Programming StepsIf entries or changes need to be made to this
schedule:a. Press FLASH and dial 
[22]. The following
message will then be shown on the display:A. Automatic/Manual Operation
Programming Steps
1.Press the AUTO/MANUAL flexible button
(Button # 1). This feature will toggle on andoff with each depression, and the display
will update with each...

SYSTEM PARAMETERS PROGRAMMING
infinitem DVX InDigital Key Telephone System
MISC. SYSTEM PARAMETERS (Cont’d)
7 10.14 DIRECTORY DIALING
Programming Steps
Enter, Change, Erase or to just View entries in
the Directory Dialing list:1. Press 
FLASH and dial [23).The followfngmessage will then be shown on the dis-
play:
Where:
- MA= Directory List Entry Number
(OOO- 199)
- XXX= Either a Station Number,
a System Speed dial bin Number,or Local Number/Name Translation
Table number.
-mm= Programmed Name
(blank if...

 rinfznite” DVX I’Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMING
MISC. SYSTEM PARAMETERS (Cont’d)
DIRECTORY DIALING (Cont’d)
To enter the Intercom number or system speed
dial bin to be associated to the name:
Programming Steps
1.Press the BIN/ICM flexible button (Button
#l).
2.Enter a three-digit station intercom num-
ber 
(loo-195), a three-digit System speed
dial number 
(020-099),or a three-digit Lo-cal Number/Name Translation Table
number (300-499).
3.Press the HOLD button to save the...

injinite’“l DVX I’
SYSTEM PARAMEKeyTERS PROGRAMMINGDigital
MISC. SYSTEM 
PARAMET.ERS (Cont’d)
DIRECTORY DIALING (Cont’d)
To clear an entry:
Programming Steps1. Press the CLEAR flexible button (Button
#3).
2.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update. The entry will be
erased (both the BIN/ICM assignment and
the programmed name).Description
CLEAR - Entries in the table may be erased and
cleared from the table allowing another entry tobe placed into...

inftnite” DVX I’
Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMING
MISC. SYSTEM PARAMETERS (Cont’d)
710.15 FLEXIBLE CARD ASSIGNMENTS
Programming Steps
1.Press FLASH and dial [24]. The following
message will be shown on the display:
Where:
- S = Station Board (KTl2)
- C = CO Line Board (COl2)
- # = Blank (unused card slot)
2.The buttons 1 through 12 indicate periph-eral card slots 1 through 12. When the
Flexible Card Assignments program is in-
itially entered, Flex Button # 1 LED will be
lit...