Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

SYSTEM PARAMETERS PROGRAMMING
infinitem DVX I’Digital Key Telephone System
SYSTEM TIMERS (Cont’d)A.System Hold Recall Timer
Programming Steps
If this timer is to be changed:
1.Press the SYSTEM HOLD RECALL TIMER
flexible button (Button 
# 1). The following
message is shown on the display phone:
2.Enter a three-digit timer value on the dialpad which corresponds to 00 l-300 sec-
onds.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
B.Exclusive Hold...

infiniteTM DVX I’
Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMING
SYSTEM TIMERS (Cont’d)C. Attendant 
Recall Timer
Programming Steps
If this timer is to be changed:1. Press the ATTENDANT RECALL TIMER
flexible button (Button 
#3). The following
message is shown on the display phone:
2.Enter a two-digit timer value on the dial
pad which corresponds to 00-60 minutes.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
D. Transfer 
Recall Timer...

SYSTEM TIMERS (Cont’d)E. Preset Forward Timer
Programming Steps
If this timer is to be changed:
1.Press the PRESET FORWARD TIMER flex-
ible button (Button 
#5). The following
message is shown on the display phone:
2.Enter a two-digit timer value on the dialpad which corresponds to 0 l-99 seconds.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
F.Call Forward No/Answer Timer
Programming Steps
If this timer is to be changed:
1.Press the CALL FORWARD...

injinite’” DVX I’
Digital Key Telephone SystemSYSTEM PARAMETERS PROGRAMMING
SYSTEM TIMERS (Co&d)G. Pause Timer
Programming Steps
If this timer is to be changed:1. Press the PAUSE TIMER flexible button
(Button 
#7). The following message is
shown on the display phone:
2.Enter a one-digit timer value on the dial
pad which corresponds to l-9 seconds.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
H.Call Park 
Recali Timer
Programming Steps
If this...

SYSTEM PARAMETERS PROGRAMMING
infinitem DVX I’Digital Key Telephone System
SYSTEM TIMERS (Co&d)
I.Conference/DISA Timer
Programming Steps
If this timer is to be changed:1. Press the 
CONFERENCE/DISA TIMER
flexible button (Button 
#9). The following
message is shown on the display phone:DescriptionThis timer determines the amount of time an
unsupervised conference can continue after the
initiator of the conference has exited the 
con-
ference.
CONFERENCE TIMER00-99
1Default: By default, the...

inf%zitem DVX IJJDigital Key Telephone System
SYSTEM PARAMETERS PROGRAMMING
SYSTEM TIMERS (Cont’d)
K.CO Ring Detect Timer
Programming Steps
If this timer is to be changed:
1.Press the CO RING DETECT TIMER flex-
ible button (Button 
# 11). The following
message is shown on the display phone:
jCORINGDET:CT:
2.Enter a one-digit timer value on the dial
pad which corresponds to 2-9 (200 msec.
to 900 msec).
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update....

SYSTEM PARAMETERS PROGRAMMING
injinitem DVX I’Digital Key Telephone System
SYSTEM TIMERS (Cont’d)M. Message Wait Reminder Tone
Programming Steps
If this feature is to be changed:1. Press the MESSAGE WAIT REMINDER
TONE flexible button (Button # 13). The
following message is shown on the display
phone:
2.Enter a three-digit timer value on the dial
pad which corresponds to 000 to 104 min-
utes.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
N.SLT Hook...

infznite” DVX I’Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMlNG
SYSTEM TIMERS (Cont’d)0.SLT Hook Flash 
Debounce Timer
Prograrmning Steps
If this timer is to be changed:
1.Press the SLT HOOK FLASH DEBOUNCETIMER flexible button (Button # 15). The
following message is shown on the display
phone:
2.Enter a three-digit timer value on the dialpad which corresponds to O-l second in
10 msec increments.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now...

SYSTEM PARAMETERS PROGRAMMING
in.nitem DVX I’Digital Key Telephone System
SYSTEM TIMERS (Co&d)
P.SMDR Call Qualification Timer
Programming Steps
If this timer is to be changed:
1.Press the SMDR CALL QUAL TIMER flex-
ible button (Button 
# 16). The following
message is shown on the display phone:
2.Enter a two-digit timer value on the dial
pad which corresponds to 00-60 seconds
in 1 sec. increments.
3.Press the HOLD button to save the entry.Confirmation tone is heard and the dis-
play will now update.
8....

infrnitem DVX I’Digital Key Telephone System
SYSTEM PARAMETERS PROGRAMMJNG
SYSTEM TIMERS (Cont’d)R. Reminder Ring Timer
Programming Steps
If this timer is to be changed:1. Press the REMINDER RING flexible but-
ton (Button 
#18). The following message
is shown on the display phone:
2.Enter a two-digit timer value on the dial
pad which corresponds to 00-99 seconds
in 1 sec. increments. Avalue of 00 disables
the timer, therefore the user will only re-
ceive one burst of ring at the beginning of
the 
callI....