Home
>
Vodavi
>
Communications System
>
Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual
Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual
Here you can view all the pages of manual Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual. The Vodavi manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 291
infinite TM Digital SystemsTF NO: 46a Direct Inward Dialing (Con’t) B. Direct Inward Dialing Parameters: The buttons on the digital terminal are defined as shown below when entering the DID programming area: 1.Press FLASH and dial [45]. The following message is shown on the display phone: DID ENTER BUT-TON NUMBER aTo program the number of DID digits: 1.Press the DIGITS Button (Button #l) in the flexible button field for programming the number of digits the system will look at for routing purposes. The...
Page 292
infinite ‘” Digital SystemsTF NO: 46a Direct Inward Dialing (Cont’d) To change the Wink Timer: 1.Press the WINK TIMER Button (Button #3) in the flexible button field for changing the Wink Timer settings. The following message is shown on the display phone: 2.Enter a three-digit value on the dial pad which corresponds to 100-300 milliseconds. 3.Press the HOLD button to save the entry. Confirmation tone will be heard and the display will update. 4Default: By default, the Wink Timer is set for 140...
Page 293
infinite ly Digital SystemsTF NO: 46a Direct Inward Dialing (Cont’d) C. Initialization of DID Tables: Description: This section describes the procedures and steps necessary to initialize the system database returning any programmed data to its original or default value. The entire system database may be initialized or various portions of the database may be individually initialized. In addition to initialization of the entire database, a system reset (Button #20) command is also included in this section...
Page 294
infinite ly Digital SystemsTF NO: 46a Direct Inward Dialing (Cont’d) If the DID Timers need to be initialized: 1.Press the DID-TIE TMRS Button (Button #14). The following message will be shown on the display phone: INITIALIZE DID-TIE TMRS PRESS HOLD 3.To initialize the DID Timers, press the HOLD button. Confirmation tone will be heard Vodavi Communications SystemsPage 11 of 22TF NO. 46a 6300 E. Rainlree Drive Scottsdale, AZ 65260(602) 443-6000
Page 295
infinite rn Digital Systems Direct Inward Dialing (Cont’d) D. Printing of DID Tables: Description:TF NO: 46a This section describes the procedures and steps necessary to print Data Base Parameters and various portions of the system.The buttons on the key telephone are defined as shown below when entering the Print Data Base Parameters programming area. With a printer connected to the RS-232C port on the DVX ” CPB board, the currently stored customer database can be printed or “uploaded” into a file....
Page 296
infinite ly Digital SystemsTF NO: 46a Direct Inward Dialing (Cont’d) Programming: 1.Press FLASH and dial [85]. The following message is shown on the display phone: If the ICLID/DID Table(s) need to be printed: 2.Press the ICLID-DID TABLES Button (Button #9). The following message will be shown on the display phone: 3.To print the ICLID/DID Table(s), press the HOLD button, The following message will be shown on the display phone:The following is an example of the ICLID/DID Table(s) database printout....
Page 297
TF NO: 46a Direct Inward Dialing (Cont’d) PRINTING ROUTEadm>ROUTE RING ASSIGNMENTS__---------- 00NONE 99NONE 1001OOB. .199199BPRINTING DID TRANS NO adm>DID TRANSLATION TABLE ENTRY 000 001002 003 004 005 006 007 008 009 010. . . . . . 095 096 097098 099 100-101 102 103104 105 . . . 99;996 997 998 999ROUTENUMBER 1000000000 1010000001 1020000002 1030000003 1040000004 1050000005 1060000006 1070000007 1080000008 1090000009 110 0000010 . . . . . . . . . . . . .. . . . .1950000095 1960000096 1970000097...
Page 298
infinite ‘” Digital SystemsTF NO: 46a Direct Inward Dialing (Cont’d) If a printout of the DID-TIE System Parameters is desired: 1.Press the DID-TIE TIMERS Button (Button #14). The following message will be shown on the display phone: 2. To print the DID-TIE System parameter database , press the HOLD button. The following message will be shown on the display phone: PRINT DID-TIE TMRS 4When the system has finished sending the information to the printer, confirmation tone will be heard. The following is an...
Page 299
infinite ‘” Digital Systems DID Default Table Entries (Flash 44)TF NO: 46a Vodavi Communications Systems 6300 E. Raintree DrivePage 16 of 22 Scottsdale, AZ 65260TF NO. 46a (602) 443-6000
Page 300
infinite ‘* Digital SystemsTF NO: 46a 57I001*I-II0000...-.57 -58001*0000-58 IO 59II-59 I001*I~---- , -600010000-60 -61001*0000-61 e-e-620010000-62 -630010000-63-64 001*0000~64 -65001*0000-65 -66001*0000-66-67 001*0000-67 II-68I001*I[ 0000-68 1Vodavi Communications SystemsPage 17 of 22TF NO. 46a 6300 E. Raintree Drive Scottsdale, AZ 65260(602) 443-6000